Construction of hydrogen fermentation from garbage slurry using the membrane free bioelectrochemical system

The aim of this study was to show the effectiveness of the membrane free bioelectrochemical system (BES) using three electrodes on inhibition of methanogenesis and construction of hydrogen fermentation from the artificial garbage slurry. The electrical redox-potential on the working electrode was adjusted to -1.0V (vs. Ag/AgCl) that has positive effect on methanogenesis. The redox-potential on the counter electrode was measured to be 1.6V. The pH in the effluents was 5.5-6.4. Hydrogen production rate at the cathode side was similar to that at the anode side and much higher than that calculated from current, and reached a maximum of 2445±815 (average±standard deviation) mL?L(-1)?d(-1) at an organic loading rate of 58.7g dichromate chemical oxygen demand per L d(-1). Methane production was negligible throughout the experiment. Acetate and butyrate were the main products of the fermentation using a BES; these offered favorable conditions for hydrogen production. The bacterial community in the bioelectrochemical hydrogen fermentor differed from that in the methanogenic seed sludge and included hitherto unknown species. These results show that high redox-potential on the anodic electrode and acidic pH in the membrane free BES can be utilized for hydrogen fermentation from the artificial garbage slurry by avoiding methanogenesis.     

Acceleration of cellulose degradation and shift of product via methanogenic co-culture of a cellulolytic bacterium with a hydrogenotrophic methanogen

Although the effects of syntrophic relationships between bacteria and methanogens have been reported in some environments, those on cellulose decomposition using cellulolytic bacteria from methanogenic reactors have not yet been examined. The effects of syntrophic co-culture on the decomposition of a cellulosic material were investigated in a co-culture of Clostridium clariflavum strain CL-1 and the hydrogenotrophic methanogen Methanothermobacter thermautotrophicus strain ΔH and a single-culture of strain CL-1 under thermophilic conditions. In this study, strain CL-1 was newly isolated as a cellulolytic bacterium from a thermophilic methanogenic reactor used for degrading garbage slurry. The degradation efficiency and cell density of strain CL-1 were 2.9- and 2.7-fold higher in the co-culture than in the single-culture after 60?h of incubation, respectively. Acetate, lactate and ethanol were the primary products in both cultures, and the concentration of propionate was low. The content of acetate to total organic acids plus ethanol was 59.3% in the co-culture. However, the ratio decreased to 24.9% in the single-culture, although acetate was the primary product. Therefore, hydrogen scavenging by the hydrogenotrophic methanogen strain ΔH could shift the metabolic pathway to the acetate production pathway in the co-culture. Increases in the cell density and the consequent acceleration of cellulose degradation in the co-culture would be caused by increases in adenosine 5'-triphosphate (ATP) levels, as the acetate production pathway includes ATP generation. Syntrophic cellulose decomposition by the cellulolytic bacteria and hydrogenotrophic methanogens would be the dominant reaction in the thermophilic methanogenic reactor degrading cellulosic materials.     

Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Analysis of enoyl-coenzyme A hydratase activity and its stereospecificity using high-performance liquid chromatography equipped with chiral separation column

Enoyl-coenzyme A (CoA) hydratase catalyzes the hydration of trans-2-enoyl-CoA to yield 3-hydroxyacyl-CoA during fatty acid degradation (β-oxidation). Although much research has focused on the stereospecificities of 2-enoyl-CoA hydratases, a direct quantification of the production of 3(R)- and 3(S)-hydroxyacyl-CoA has not yet been established. Therefore, we developed a method of concurrently quantifying 3(R)- and 3(S)-hydroxyacyl-CoA using high-performance liquid chromatography (HPLC) equipped with a chiral separation column. The optimized conditions for the separation of 3(R)-, 3(S)-hydroxyhexadecanoyl-CoA and trans-2-hexadecenoyl-CoA, were determined to be as follows: mobile phase of 35/65 (v/v) of 50 mM phosphate buffer (pH 5.0)/methanol; flow rate of 0.5 mL/min; detection at 260 nm; and column temperature of 25°C. This method was applied to subcellular fractions of rat liver; the results directly confirmed that 3(S)-hydroxyhexadecanoyl-CoA is the dominant product obtained from the heat-stable enoyl-CoA hydratase-catalyzed reaction of trans-2-hexadecenoyl-CoA. Finally, the stereospecificities of L-bifunctional protein (L-BP) and D-bifunctional protein (D-BP) were reinvestigated using this method, and it was confirmed that L- and D-BP yielded 3(S)- and 3(R)-hydroxyhexadecanoyl-CoA were yielded from trans-2-hexadecenoyl-CoA, respectively. 3(R)-Hydroxyacyl-CoA is a peroxisomal β-oxidation-specific intermediate. Therefore, this method is potentially useful not only studies regarding the stereochemistry of enoyl-CoA hydratase but also for the diagnosis of diseases caused by defects of peroxisomal enoyl-CoA hydratase.     

New conceptual three-phase current-fed soft switching pulse width modulation converter with switched capacitor type resonant dc link

This paper presents a novel prototype of three-phase current-fed PWM converter with a switched capacitor type resonant dc link snubber circuit, which can basically operate under a principle of zero current soft switching commutation. The optimum PWM pattern-based control scheme proposed by the authors is effectively applied for this active converter. In this paper, the steady-state operating principle of a new converter circuit treated here is described. The practical design procedure of this converter is discussed from a theoretical point of view. The feasible experiment to confirm zero current soft switching commutation of this converter is concretely implemented and evaluated herein.     

Investigation of self-assembled monolayer treatment on SiO2 gate insulator of poly(3-hexylthiophene) thin-film transistors

We have investigated self-assembled monolayer (SAM) treatment on SiO₂ gate insulator of poly(3-hexylthiophene) (P3HT) thin-film transistor (TFT), and demonstrated a correlation between mobility and surface free energy of the insulator. The device with lower surface free energy shows higher mobility. The docosyltrichlorosilane (DCTS)-treated device exhibits the best performance among the various SAM-treated devices examined. Field-effect mobility, on/off ratio and threshold voltage of the DCTS-treated P3HT TFT were 0.015 cm²/Vs, >10⁵ and −14 V, respectively.     

40 Gbit/s packet bit error ratio and loss real-time measurement for ultrahigh-speed packet switched network

A novel packet bit error rate (BER) and loss measurement method and system is proposed. A proposed 40 Gbit/s packet BER and loss measurement system is expressed in detail. A 40 Gbit/s BER and loss measurement with various conditions is demonstrated experimentally. In real time, only the payload part of a packet and burst stream with fluctuated guard time is evaluated. The BER and packet loss of a randomly received packet sequence due to routing and buffering can be also evaluated by the measurement system. A 10 Gbit/s packet BER and loss measurement with optical label switching, buffering, and preamble-free optical packet 3R are demonstrated experimentally.     

Slc25a39 and Slc25a40 Expression in Mice with Bile Duct Ligation or Lipopolysaccharide Treatment

SLC25A39/40, involved in mitochondrial GSH (mGSH) import from the cytoplasm, is essential for protection against oxidative stress and mitochondrial dysfunction. We examined the effects of cholestasis, through bile duct ligation (BDL) and lipopolysaccharide (LPS)-induced inflammation in mice, on Slc25a39/40 expression. Additionally, we used human clear cell renal carcinoma (KMRC-1) cells to elucidate the mechanism of regulation of SLC25A39/40 expression in the kidneys after LPS treatment. BDL resulted in a decrease in Slc25a39 mRNA in the liver and a decrease in Slc25a39/40 mRNA and protein in the kidneys. Consequently, there was a significant decrease in mGSH levels in the kidneys of BDL mice compared with those in sham mice. LPS treatment resulted in increased Slc25a40 expression in the kidneys. In KMRC-1 cells, the combination treatment of LPS-RS or FPS-ZM1 with LPS suppressed the LPS-induced increase in SLC25A40, suggesting that SLC25A40 expression could be regulated by the signaling pathway via toll-like receptor 4 and the receptor for advanced glycation end products, respectively. Our findings contribute to understanding the role of mGSH in the maintenance of the mitochondrial redox state. To the best of our knowledge, this is the first study that demonstrates the changes in Slc25a39/40 expression in mice with cholestasis-associated renal injury and LPS-induced inflammation.     

Bloch Lines Constituting Antiskyrmions Captured via Differential Phase Contrast

Much scientific capital has been directed toward exotic magnetic spin textures called Bloch lines, that is, Néel-type line boundaries within domain walls, because their geometry promises high-density magnetic storage. While predicted to arise in high-anisotropy magnets, bulk soft magnets, and thin films with in-plane magnetization, Bloch lines also constitute magnetic antiskyrmions, that is, topological antiparticles of skyrmions. Most domain walls occur as Bloch-type or Néel-type, in which the magnetization rotates parallel or perpendicular to the domain wall across its profile, respectively. The Bloch lines’ Néel-type rotation and their minute size make them difficult to directly measure. This work utilizes differential phase contrast (DPC) scanning transmission electron microscopy (STEM) to measure the in-plane magnetization of Bloch lines within antiskyrmions emergent in a non-centrosymmetric Heusler magnet with D_2d symmetry, Mn_1.4Pt_0.9Pd_0.1Sn, in addition to Bloch-type skyrmions in an FeGe magnet with B20-type crystal structure to benchmark the DPC technique. Both in-focus measurement and identification of Bloch lines at the antiskyrmion's corners are provided.