Selecting a waste management option using a life-cycle analysis approach

Solid-waste management, and in particular the disposal of used packaging, is currently the subject of much topical debate. This is driven by both consumer and legislative pressures. Consumers see used packaging as a highly visible element of municipal solid waste, complaining of excessive packaging and low levels of recycling. Legislators, perhaps in pandering to the views expressed by consumer bodies, have been active within the CEC and individual Member States by introducing (or proposing) legislation or similar regulatory tools and targets to facilitate a greater diversion of used packaging from disposal by landfill to alternative solid-waste management practices, in particular recycling, which are widely accepted to have a lower impact on the environment. In this paper the relative environmental profiles of pursuing alternative solid-waste management practices to disposal by landfill are explored, focusing not just on solid waste per se but also on associated considerations of energy consumption and emissions, which are invariably overlooked as factors contributing to the environmental impact of solid-waste management practices.     

High throughput VLSI DSP using replicated finite rings

This paper discusses strategies for implementing DSP systems using residue replication. The theory, recently introduced by two of the authors, uses formal polynomial ring mappings, from binary representations, to direct product ring implementation of integer processing arrays. The mapping produces completely independent computational arrays each computing over the same ring. This paper describes an architecture and processing array to implement, and take advantage of, the special computational ring structures that result from the mapping. A brief review of the theory and mapping techniques, is followed by the discussion of the architecture and VLSI design of an efficient inner product processing array using Fermat Primes.     

Alfalfa yield response to inoculation with recombinant strains of Rhizobium meliloti with an extra copy of dctABD and/or modified nifA expression

The construction of rhizobial strains which increase plant biomass under controlled conditions has been previously reported. However, there is no evidence that these newly constructed strains increase legume yield under agricultural conditions. This work tested the hypothesis that carefully manipulating expression of additional copies of nifA and dctABD in strains of Rhizobium meliloti would increase alfalfa yield in the field. The rationale for this hypothesis is based on the positive regulatory role that nifA plays in the expression of the nif regulon and the fact that a supply of dicarboxylic acids from the plant is required as a carbon and energy source for nitrogen fixation by the Rhizobium bacteroids in the nodule. These recombinant strains, as well as the wild-type strains from which they were derived, are ideal tools to examine the effects of modifying or increasing the expression of these genes on alfalfa biomass. The experimental design comprised seven recombinant strains, two wild-type strains, and an uninoculated control. Each treatment was replicated eight times and was conducted at four field sites in Wisconsin. Recombinant strain RMBPC-2, which has an additional copy of both nifA and dctABD, increased alfalfa biomass by 12.9% compared with the yield with the wild-type strain RMBPC and 17.9% over that in the uninoculated control plot at the site where soil nitrogen and organic matter content was lowest. These increases were statistically significant at the 5% confidence interval for each of the three harvests made during the growing season. Strain RMBPC-2 did increase alfalfa biomass at the Hancock site; however, no other significant increases or decreases in alfalfa biomass were observed with the seven other recombinant strains at that site. At three sites where this experiment was conducted, either native rhizobial populations or soil nitrogen concentrations were high. At these sites, none of the recombinant strains affected yield. We conclude that RMBPC -2 can increase alfalfa yields under field conditions of nitrogen limitation, low endogenous rhizobial competitors, and sufficient moisture.     

Investigating the Social Dimensions of Transport Disadvantage II: From Concepts to Methods through an Empirical Case Study

This article is the second of two papers that review the field of spatially sensitive social scientific research into the links between social status and transport disadvantage. The first paper undertook a comprehensive review of the social scientific and transport planning literature to mark the level of development in the field and identify conceptual and methodological issues and constraints in this field of inquiry. The present article supports the advancement of socially and geographically sensitive transport research by opportunities for the development of more sophisticated spatial analytical methodologies. The approach we present is able to account for factors not previously addressed in either social or transport planning research, in particular the temporal dimensions of transport service accessibility. The article articulates the methodology through an empirical case study of socio-spatial transport disadvantage within the Gold Coast City. The article demonstrates that there are important theoretical and practical lessons to be gained for researchers and policy makers in addressing the social dimensions of transport and infrastructure provision. Further, the article argues that an attentiveness to new ways of combining and representing social and transport data-sets can promote policy relevant empirical social inquiry. The article also contributes in a productive way to the empirical knowledge of Australia's sixth-largest metropolitan area, which is often overlooked by urban scholars.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

Housing Tenure: Pacific Families in New Zealand

Home ownership has been associated with health, social and economic benefits. However, a decline in ownership has been observed over the past decade in New Zealand. Minority groups, including Pacific people, have been disadvantaged in the housing sector. This study investigated housing tenure and the relationship between tenure and health among mothers of a birth cohort of Pacific children in New Zealand. Findings showed that most families lived in state or private rental accommodation with few (15.4 per cent) owning their own homes. Homeowners were more likely to be older, partnered and have higher incomes. Better mental health was observed for homeowners compared to renters. Findings can inform housing and public health policy for Pacific families.     

Generation and context memory.

Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget aspects of context (location and background color). Second, nonvisual generation tasks with either semantic or nonsemantic generation rules (antonym and rhyme generation, respectively) produced the same pattern of results. In contrast, a visual (or data-driven) generation task (letter transposition) did not disrupt context memory for color. Third, generating nonwords produced no effect on item memory but persisted in producing a negative effect on context memory for target attributes, implying that (a) the negative generation effect in context memory is not mediated by semantic encoding, and (b) the negative effect on context memory can be dissociated from the positive effect on item memory. The results are interpreted in terms of the processing account of generation. The original, perceptual-conceptual version of this account is too narrow, but a modified processing account, based on a more generic visual versus nonvisual processing distinction, accommodates the results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Science and sustainability: who knows best?

Sustainability is a worthy ideal. Deciding between the priorities associated with the sustainable development needed to work towards sustainability, specific objectives to be met, methods for meeting them and criteria for success will be governed primarily by politics, perspective and probably power. Effective decision-making, however, involves identifying and deciding between a variety of options, assessing the existing state of knowledge, uncertainty and ignorance and the time that might be needed usefully to improve knowledge and reduce uncertainty. It also requires objectivity, open-mindedness, scepticism and clarity of thought. Knowledge is necessary (but not sufficient) for rational decision-making. Some knowledge (but not all) relates to a developing understanding of the physical and natural world, i.e. scientific knowledge. Are there absolutes in this knowledge? With what authority can (or should) science speak? Is science too much confused with technology and its application? How should critical scientific and technological controversies be resolved? To what extent should decision-making/adjudication be based on a democratic process or on rational judgement by experts? How can a balance between these be achieved and be made acceptable? What happens when scientists become activists? How can science and democracy be reconciled? The issues raised by these questions will be discussed.     

Individual differences in self-assessed health: An information-processing investigation of health and illness cognition.

In 2 studies, the relation between measures of self-assessed health (SAH) and automatic processing of health-relevant information was investigated. In Study 1, 84 male and 86 female undergraduate students completed a modified Stroop task. Results indicated that participants with poorer SAH showed enhanced interference effects for illness versus non-illness words. In Study 2, 27 male and 30 female undergraduate students completed a self-referent encoding task. Results offered a conceptual replication and extension of Study 1 by confirming the specificity of the relation between SAH measures and automatic processing of health (vs negative or positive general trait) information. These studies provide evidence that individual differences in SAH are reflected in schematic processing of health-relevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)