A high-frequency linear ultrasonic array utilizing an interdigitally bonded 2-2 piezo-composite

This paper describes the development of a high-frequency 256-element linear ultrasonic array utilizing an interdigitally bonded (IB) piezo-composite. Several IB composites were fabricated with different commercial and experimental piezoelectric ceramics and evaluated to determine a suitable formulation for use in high-frequency linear arrays. It was found that the fabricated fine-scale 2-2 IB composites outperformed 1-3 IB composites with identical pillar- and kerf-widths. This result was not expected and lead to the conclusion that dicing damage was likely the cause of the discrepancy. Ultimately, a 2-2 composite fabricated using a fine-grain piezoelectric ceramic was chosen for the array. The composite was manufactured using one IB operation in the azimuth direction to produce approximately 19-μm-wide pillars separated by 6-μm-wide kerfs. The array had a 50 μm (one wavelength in water) azimuth pitch, two matching layers, and 2 mm elevation length focused to 7.3 mm using a polymethylpentene (TPX) lens. The measured pulse-echo center frequency for a representative array element was 28 MHz and -6-dB bandwidth was 61%. The measured single-element transmit -6-dB directivity was estimated to be 50°. The measured insertion loss was 19 dB after compensating for the effects of attenuation and diffraction in the water bath. A fine-wire phantom was used to assess the lateral and axial resolution of the array when paired with a prototype system utilizing a 64-channel analog beamformer. The -6-dB lateral and axial resolutions were estimated to be 125 and 68 μm, respectively. An anechoic cyst phantom was also imaged to determine the minimum detectable spherical inclusion, and thus the 3-D resolution of the array and beamformer. The minimum anechoic cyst detected was approximately 300 μm in diameter.     

A high-frequency annular-array transducer using an interdigital bonded 1-3 composite

This paper reports the design, fabrication, and characterization of a 1-3 composite annular-array transducer. An interdigital bonded (IB) 1-3 composite was prepared using two IB operations on a fine-grain piezoelectric ceramic. The final composite had 19-μm-wide posts separated by 6-μm-wide polymer kerfs. A novel method to remove metal electrodes from polymer portions of the 1-3 composite was established to eliminate the need for patterning and aligning the electrode on the composite to the electrodes on a flexible circuit. Unloaded epoxy was used for both the matching and backing layers and a flexible circuit was used for interconnect. A prototype array was successfully fabricated and tested. The results were in reasonable agreement with those predicted by a circuit-analogous model. The average center frequency estimated from the measured pulse-echo responses of array elements was 33.5 MHz and the -6-dB fractional bandwidth was 57%. The average insertion loss recorded was 14.3 dB, and the maximum crosstalk between the nearest-neighbor elements was less than -37 dB. Images of a wire phantom and excised porcine eye were obtained to show the capabilities of the array for high-frequency ultrasound imaging.     

A novel integrated model combining Cellular Automata and Phase Field methods for microstructure evolution during solidification of multi-component and multi-phase alloys

A novel numerical model is developed by integrating Cellular Automata (CA) and Phase Field (PF) methods to predict the dendrite growth of multi-component and multi-phase alloys during the solidification process. The micro-scale CA model is built to track dendrite growth and associated mass redistribution, while the 1D PF model reformulated in a polar coordinate system is used to calculate the growth kinetics for the CA interface cells. The integrated CAPF model can take advantage of the high computational efficiency of the CA model and the comprehensive physical background of the PF model. The model has been validated against an analytical model and then applied to the cases of casting and laser welding processes. Good quantitative agreement is obtained between the simulated results and the experiments.     

Spermatogenic and sperm quality differences in an experimental model of metabolic syndrome and hypogonadal hypogonadism

The synergistic effect of the co-morbidities that comprise metabolic syndrome (MetS) is increasingly being recognised as an important contributor in the pathology of a broad spectrum of seemingly disparate conditions. However, in terms of male reproductive function, beyond erectile dysfunction, little is known about the influence of this cohort (collectively or separately) on spermatogenesis and sperm quality. The aims of this study were to assess the reproductive tract of a MetS animal model for detrimental changes, to determine whether a group of compounds (advanced glycation end products and their receptor) known to cause cell dysfunction and DNA damage was present and assess whether hypogonadotropic hypogonadism was the main contributing factor for the changes seen. Animals fed a high-fat diet were found to have significantly increased cholesterol, triglycerides, blood glucose, mean arterial pressure and visceral fat levels. Although serum testosterone was decreased, no changes were seen in either testicular or epididymal histology. Immunolocalisation of N(ε)-carboxymethyl-lysine and the receptor for advanced glycation end products was found in the testes, epididymides and sperm of the two treated groups of animals; however, ELISA did not show any difference in protein levels. Similarly, assessment of sperm nuclear DNA (nDNA) fragmentation by acridine orange test did not find significant differences in nDNA integrity. We conclude that the minimal effect on spermatogenesis and sperm quality seen in our model is probably due to the moderate increase of blood glucose rather than the hypogonadism.     

Rosemary and cancer prevention: preclinical perspectives

Colorectal cancer is the second leading cause of cancer death in Australia. Nutrition, particularly intake of vegetables and certain plant components, has been reported to have a major role in cancer risk reduction. Recently, there has been a growing research interest in rosemary, a common household plant grown in many parts of the world. This study aims to review scientific evidence from all studies, published from 1996 to March 2010 that examined the protective effects of rosemary on colorectal cancer and other types of cancer. Literature evidence from animal and cell culture studies demonstrates the anticancer potential of rosemary extract, carnosol, carnosic acid, ursolic acid, and rosmarinic acid. No evidence for other rosemary constituents was found. The reported anticancer properties were found to arise through the molecular changes in the multiple-stage process of cancer development, which are dose related and not tissue or species specific. This is evidenced by the ability of rosemary to suppress the development of tumors in several organs including the colon, breast, liver, stomach, as well as melanoma and leukemia cells. The results suggested that the different molecular targets modulated by rosemary and its active constituents are useful indicators of success in clinical cancer chemo-prevention trials.     

Single molecule magnets on a gold surface: in situ electrospray deposition, x-ray absorption and photoemission

Single molecule magnets based on the dodecamanganese (III, IV) cluster with two different types of ligand (acetate and benzoate) have been studied on the Au(111) surface. Due to the non-volatile and fragile nature of the molecules, we have used ultra-high vacuum electrospray deposition to produce a series of surface coverages from a fraction of a monolayer to multilayer films in both cases. Synchrotron radiation based electron spectroscopy has been used to study the adsorption of the molecules on the Au(111) surface and the effect that this has on the oxidation states of the manganese atoms in the core. In both cases, reduction of the core is observed due to the interaction with the surface, to essentially the same extent despite substantial differences in the size and nature of the ligand shell.     

Observation of two resistance switching modes in TiO2 memristive devices electroformed at low current

We report the observation of two resistance switching modes in certain 50 nm × 50 nm crossbar TiO(2) memristive devices that have been electroformed with a low-current process. The two switching modes showed opposite switching polarities. The intermediate state was shared by both modes (the ON state of the high-resistance mode or the OFF state of the low-resistance mode) and exhibited a relaxation to a more resistive state, including an initial transient decay. The activation energies of such a decay and ON-switching to the intermediate state were determined to be 50-210 meV and 1.1 eV, respectively. Although they are attributed to the coexistence of charge trapping and ionic motion, the ionic motion dominates in both switching modes. Our results indicate that the two switching modes in our system correspond to different switching layers adjacent to the interfaces at the top and bottom electrodes.