国产耐火砖在德士古水煤浆气化炉的使用

分析气化炉耐火材料损蚀原因及国产耐火砖在德士古水煤浆加压气化炉中的使用情况，使用结果证明，国产耐火砖可以替代进口砖，每年节约设备投资600万元左右。     

塑料旋转成型用原料的特点、品种和发展

对塑料旋转成型用原料的特点和品种进行总结和讨论，并介绍了最新的发展情况。随着塑料旋转成型的工艺技术的发展，该项工艺可用的原料品种正在大大拓广，旋转成型在塑料加工工艺中的重要性日益增加。     

采用主监视窗扩展技术的增强现实三维注册方法

在增强现实三维注册中,采用重新检测策略时顿卡现象严重。提出一种采用主监视窗扩展技术的增强现实三维注册方法。在检测阶段,引入特征点可信度和主监视窗,并设计主监视窗的分割、扩展和调控策略,大幅提升了计算速度;在跟踪阶段,采用基于图像金字塔的光流算法进行特征点跟踪。实验证明,该方法不仅有效缓解了顿卡现象,也提升了系统整体的实时性。     

2，6－二氯－4－硝基苯胺的合成

以盐酸－过氧化氢为氯代试剂，由对硝基苯胺制备了２，６－二氯－４－硝基苯胺。结果表明，过氧化氢的比例、反应温度对收率有较大的影响。过氧化氢过量，反应温度在５０℃时，可缩短反应时间，提高收率。     

一种适用于物联网设备的自适应跳频方法

由于2.4 GHz频段的免授权性和开放性,新的无线系统在该频段内的自由接入必定会受到同频系统的干扰。针对上述问题,采用自适应跳频技术保证通信双方在通信中自动适应信道变化,实时避开频率集中被干扰的频点,提高通信的可靠性和抗干扰能力。首先介绍自适应跳频技术的2种相关算法,时间同步及信道评估算法,接着介绍基于CC2500的物联网设备的具体实现流程,并采用公共信道实现跳频信令的传输,在基于CC2500的物联网设备上做了具体实践,最后通过实验分析表明,该跳频算法具有一定的实用性和先进性。     

基于Cortex-A8处理器的车牌识别系统设计

随着车辆数量的日益增多,交通管理的压力日趋增大,越来越多的场合需要实时车牌识别。针对此问题,本文设计一种基于Cortex-A8处理器的实时车牌识别系统。该系统以Coretx-A8嵌入式处理器为核心,通过V4L2接口进行视频流的采集,然后运行基于改进的OpenCV车牌识别算法,最后通过MJPG-streamer和Socket编程进行视频流和车牌数据的传输。测试结果表明,该系统具有较强的稳定性和实时性,具有较强的实用价值。     

Structure and dynamics of a pentablock copolymer of polystyrene-polybutadiene in a butadiene-selective solvent

We have examined solutions of a polystyrene-polybutadiene pentablock copolymer in n-heptane, a strongly selective solvent for polybutadiene. Small angle neutron scattering from 7 to 15% samples reveals domains about 10 nm in radius formed by the association of 200 polystyrene blocks. Dynamic light scattering measurements on 8 and 9% samples showed three modes: a fast diffusive mode related to the collective diffusion in semidilute solutions/gels; a relaxational mode related to the local dynamics of polystyrene domains trapped in the gel formed by bridging the domains with the polybutadiene chains; and a very slow diffusive mode. The relaxational dynamics persisted over the entire temperature range, becoming faster with increasing temperature, indicating a decreased microviscosity at higher temperatures. The slow dynamics seems to be connected with heterogeneities in the physical gel due to microsyneresis and almost disappeared above 50 °C. Macroscopic phase separation into two liquid phases was observed in a dilute solution of the un-associated copolymer, and into a liquid and gel phase at higher concentrations. The absence of flower-like micelles in dilute solutions and the macroscopic phase seperation suggest that the gels in the pentablock are formed by random association of multiplet domains and not by bridging of micellar domains.     

Electrochemical copolymerization of carbazole and 3‐methylthiophene

The copolymerization of carbazole (CZ) and 3‐methylthiophene (3MeT) was successfully performed electrochemically in freshly distilled boron trifluoride diethyl etherate by direct anodic oxidation of the monomer mixtures, although the oxidation potentials of CZ and 3MeT were quite different. The electrochemical properties of the copolymers were studied with cyclic voltammetry. The influence of the applied polymerization potential on the synthesis of the copolymers was investigated. The higher potential favored the incorporation of 3MeT units into the copolymers. The insertion of 3MeT units into polycarbazole (PCZ) was helpful in improving the conductivity of PCZ. The novel copolymers had the advantages of both PCZ and poly(3‐methylthiophene), that is, good redox activity, good thermal stability, and high conductivity. The structure and morphology of the copolymers were investigated with ultraviolet–visible, infrared spectroscopy, thermal analysis, and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1877–1885, 2006     

基于过程控制技术对轮胎硫化过热水主管道振动问题的解决

首先介绍过程控制系统的基本概念、控制模型、质量指标，结合过程控制系统理论分析轮胎硫化过热水制造的控制过程，找出原来控制不稳定的原因，进行被控参数的改变，消除输送管道振动的问题。     

乙苯/乙烯烷基化反应中EA-8402分子筛催化剂的失活动力学研究

用内循环无梯度反应器,在593～633K范围内考察了在乙苯/乙烯进行定向烷基化反应合成对二乙苯时,EA-8402分子筛催化剂的失活行为,建立了相应的失活动力学模型: -da/dt=0.3271exp(-12.94/T)P_(EB)~(0.02)P_(E(?))~(0.383)·α这一模型可作为该反应的宏观动力学模型的补充。由失活级数d=1,按Levenspiel判据推断:其失活机理应该是不受内扩散阻力控制的平行-连串失活。