Wind resource assessment from C-band SAR

Using accurate inputs of wind speed is crucial in wind resource assessment, as predicted power is proportional to the wind speed cubed. First, wind speeds retrieved from a series of 91 ERS-2 SAR and Envisat ASAR images, at moderate wind speeds (2-15 m s^− 1), were validated against in situ measurements from an offshore mast in the North Sea. The wind direction input, necessary for SAR wind speed retrievals, was obtained from the meteorological mast and from a local gradient analysis of wind streaks in the SAR images. A wind speed standard deviation of ∼ 1.1 m s^− 1 was found when in situ wind directions were used. The use of local gradient wind directions yielded a standard deviation of ∼ 1.3 m s^− 1. Wind speeds retrieved from three geophysical model functions (CMOD-IFR2, CMOD4, and CMOD5) were compared. The best approximation to the in situ measurements of wind speed was found for CMOD-IFR2, despite a bias on the order of − 0.3 m s^− 1. CMOD4 retrievals also underestimated the wind speed, whereas the bias on CMOD5 retrievals was negligible. Then, wind resource assessments were made from the SAR-based wind observations to show how errors in wind speed from the different SAR wind retrievals were reflected in the wind statistics. The mean wind speed, obtained for all of the 91 SAR scenes, was linked closely to the bias of SAR wind retrievals. Agreement to ± 15% of the in situ measurements was found for all the wind retrieval methods tested. The accuracy of power density estimates for the entire data set was evaluated by the standard deviation of SAR wind retrievals relative to the in situ measurements. SAR wind fields retrieved with CMOD-IFR2, using in situ wind direction inputs, exactly yielded the power density predicted from in situ measurements alone. The SAR-based wind resource assessment also corresponded well to predictions from longer time series of in situ measurements. This indicates that a reliable wind resource assessment may be achieved from a series of randomly selected SAR images. The findings presented here could be useful in future wind resource assessment based on SAR images.     

Polymer electrolyte membrane fuel cells based on Nafion and acid-doped PBI: State-of-the-art and recent progress

Ｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅｍｅｍｂｒａｎｅｆｕｅｌｃｅｌｌｓ (ＰＥＭＦＣ)ａｒｅｒｅｃｅｉｖ ｉｎｇｍｏｒｅａｎｄｍｏｒｅａｔｔｅｎｔｉｏｎｄｕｅｔｏｔｈｅｉｒａｂｉｌｉｔｉｅｓａｓａｐｏｗｅｒｇｅｎｅｒ ａｔｏｒｆｏｒｂｏｔｈｓｔａｔｉｏｎａｒｙａｎｄｔｒａｎｓｐｏｒｔａｔｉｏｎａｐｐｌｉｃａｔｉｏｎｓ[1] .Ｔｈｅｆｅａ ｔｕｒｅｓｏｆｔｈｅＰＥＭＦＣａｒｅｈｉｇｈｐｏｗｅｒｄｅｎｓｉｔｙ ,ｌｏｗｏｐｅｒａｔｉｏｎａｌｔｅｍ ｐｅｒａｔｕｒｅ ,ｐｏｌｌｕｔｉｏｎｆｒｅｅｏｐｅｒａｔｉｏｎ ,…     

Carbon nanotube electron sources and applications

In this review we give an overview of the present status of research on carbon nanotube (CNT) field emitters and their applications. Several different construction principles of field-emission devices with CNTs are summarized. The emission mechanism is introduced and a detailed overview is given of the measured emission properties and related topics of CNT electron sources. We give also several examples of field-emission devices with CNT electron emitters that are presently being investigated in the academic world as well as in industry. Carbon nanotube electron sources clearly have interesting properties, such as low voltage operation, good stability, long lifetime and high brightness. The most promising applications are the field-emission display and high-resolution electron-beam instruments. But several hurdles remain, such as the manufacture of an electron source or an array of electron sources with exactly the desired properties in a reproducible manner.     

The measurement of paste content in hardened concrete using automatic image analyzing technique

This paper describes a technique for the measurement of paste contents of mortars and concretes. The technique involves etching the polished surfaces of samples with a saturated solution of salicylic acid in 80:20 methyl alcohol: water mixture which does not affect limestone aggregates. The contrast difference between the exposed aggregates and the etched areas is then enhanced by painting the aggregates black and filling the etched areas with a white powder. An automatic image analyzer can then measure either the blackened aggregates or the whitened etched areas.     

Shifts in biodegradation kinetics of the herbicides MCPP and 2,4-D at low concentrations in aerobic aquifer materials

Biodegradation kinetics of two phenoxy acid herbicides, MCPP [(+/-)-2-(4-chloro-2-methylphenoxy)propanoic acid; mecoprop] and 2,4-D [2,4-dichlorophenoxyacetic acid] were studied in laboratory batch microcosms at low concentrations (0.025-100 microg/L) using 14C technique with sediments and groundwater from a shallow aerobic sandy aquifer. Below a certain threshold concentration of approximately 1 microg/L for 2,4-D and 10 microg/L for MCPP, the biodegradation followed first-order nongrowth kinetics, and no adaptation was observed within the experimental period of 341 d. Half-lifes for ultimate degradation were 500 d for 2,4-D and 1100 d for MCPP at 10 degrees C in unpolluted aquifer sediment in this environmentally relevant concentration regime. Above the threshold concentrations, the biodegradation rate accelerated gradually due to selective growth of specific biomass, which was ascertained from 14C most probable number enumerations of specific phenoxy acid degraders. Atthe highest concentration tested (100 microg/ L), specific degraders increased from 10(-1) to 10(5) cells/g during the experiment, and half-lifes after adaptation decreased to approximately 5 d. The enhanced rate of degradation by adapted systems was maintained during degradation of the last residuals measured to less than 0.1 microg/L. In situ long-term preexposure of the aquifer sediment also resulted in significant higher degradation rates of the phenoxy acids.     

Upscaling and automation of electrophysiology: toward high throughput screening in ion channel drug discovery

Effective screening of large compound libraries in ion channel drug discovery requires the development of new electrophysiological techniques with substantially increased throughputs compared to the conventional patch clamp technique. Sophion Bioscience is aiming to meet this challenge by developing two lines of automated patch clamp products, a traditional pipette-based system called Apatchi-1, and a silicon chip-based system QPatch. The degree of automation spans from semi-automation (Apatchi-1) where a trained technician interacts with the system in a limited way, to a complete automation (QPatch 96) where the system works continuously and unattended until screening of a full compound library is completed. The performance of the systems range from medium to high throughputs.     

Production compilation: a simple mechanism to model complex skill acquisition

In this article we describe production compilation, a mechanism for modeling skill acquisition. Production compilation has been developed within the ACT-Rational (ACT-R; J. R. Anderson, D. Bothell, M. D. Byrne, & C. Lebiere, 2002) cognitive architecture and consists of combining and specializing task-independent procedures into task-specific procedures. The benefit of production compilation for researchers in human factors is that it enables them to test the strengths and weaknesses of their task analyses and user models by allowing them to model the learning trajectory from the main task level and the unit task level down to the key-stroke level. We provide an example of this process by developing and describing a model learning a simulated air traffic controller task. Actual or potential applications of this research include the evaluation of user interfaces, the design of systems that support learning, and the building of user models.     

Estimating the Optimal Margins of Embeddings in Euclidean Half Spaces

Concept classes can canonically be represented by matrices with entries 1 and –1. We use the singular value decomposition of this matrix to determine the optimal margins of embeddings of the concept classes of singletons and of half intervals in homogeneous Euclidean half spaces. For these concept classes the singular value decomposition can be used to construct optimal embeddings and also to prove the corresponding best possible upper bounds on the margin. We show that the optimal margin for embedding n singletons is and that the optimal margin for half intervals over {1,...,n} is . For the upper bounds on the margins we generalize a bound by Forster (2001). We also determine the optimal margin of some concept classes defined by circulant matrices up to a small constant factor, and we discuss the concept classes of monomials to point out limitations of our approach.