Nonlinear dynamics of a plasma torch generated by a laser pulse of large width

Experimental data on the nonlinear dynamics of a plasma torch generated by a laser pulse of large width acting upon a graphite target are presented and discussed. The mushroom shape of the luminous region and the duration of emission observed in experiment are explained by the development of the Richtmyer-Meshkov instability at the carbon plasma-air interface and by the formation of nanoparticles in the plasma expanding into the buffer gas.     

An anti-plane crack perpendicular to the weak/micro-discontinuous interface in a bi-FGM structure with exponential and linear non-homogeneities

Treated was an anti-plane crack perpendicular to the interface of an exponential-type FGM strip bonded to another linear-type FGM substrate with infinite thickness. Through Fourier integral transform, the problem was reduced as a Cauchy singular integral equation, which was further solved numerically by the Lobatto–Chebyshev collocation method. Based on the numerical solution, the effects of the geometrical and physical parameters on the stress intensity factor (SIF) were analyzed and the following conclusions were obtained: (a) A notable discrepancy between the interface-perpendicular crack and the interfacial one is that, to reduce the weak-discontinuity of interface or to make the interface micro-discontinuous will not necessarily decrease the SIF of the former, but will surely decrease that of the latter. (b) When a crack tip is situated very near to the interface (or free surface), its SIF will be high and totally dominated by the interface (or free surface). (c) To increase the stiffness of the FGM on one side of the interface is beneficial to preventing the crack on the other side from growing toward the interface. Besides, some practical suggestions were further given for material design in the field of composites.     

Synthesis of CN<Subscript>x</Subscript> nanotubes using catalysts prepared from zinc and nickel bimaleates

Nitrogen-containing carbon nanotubes have been prepared via acetonitrile (CH₃CN) pyrolysis at 850°C catalyzed by nanoparticles produced by the thermal decomposition of zinc and nickel bimaleates and their solid solutions. The synthesized samples have been characterized by transmission electron microscopy, x-ray diffraction, and x-ray photoelectron spectroscopy. The results demonstrate that increasing the zinc content of catalyst nanoparticles reduces the yield of carbon nanotubes and increases the nitrogen content of the material. The high synthesis temperature gives rise to zinc vaporization, which influences the growth process, increasing the nanotube diameter, reducing the wall thickness, and lowering the structural perfection of the graphite layers.     

Personalisierung und informationelle Selbstbestimmung Ein unauflösbarer Widerspruch?

Ohne Zusammenfassung     

Creep Crack Growth in Polypropylene Film with Various Crack Lengths at Diverse Stresses and Temperatures

Creep crack growth rates were measured using centrally cracked tension specimens of thin polypropylene film with different crack lengths at various stresses and temperatures. The creep crack growth rates were correlated with the stress intensity factor. There was the region of the minimum constant crack growth rate which occupied more than 70% of the total creep failure life. This constant creep crack growth rate characteristics were analyzed on the basis of the stress-dependent Arrhenius type thermally activated process.     

Investigation of the influence of design parameters on the flow performance of single and double disk viscous micropumps

This paper investigates the effect of radius ratio, and channel aspect ratio on the flow performance of newly introduced single and double disk viscous micropumps. A lubrication solution for the flow field, which accounts for both radius and channel aspect ratios either in single or double disk micropumps was developed and compared with available experimental data and with an approximate solution which estimates for the flow rate only in single disk pump and neglects channel aspect ratio. Additionally, a number of 3D numerical models for single and double disk micropumps were built and analyzed using the finite volume method. Pressure and drag shape factors were introduced to describe the effects of radius and channel aspect ratios on the flow rate. The values of these factors for the whole range of studied parameters are found analytically and numerically. The error in estimating the flow rate was found to be less than 10% for r ₁ /r ₂ > 0.2, and less than 7% for the studied range of h/w. Also, the lubrication solution was found to be in good agreement with the numerical and experimental results.     

A new high-order accurate continuous Galerkin method for linear elastodynamics problems

A new high-order accurate time-continuous Galerkin (TCG) method for elastodynamics is suggested. The accuracy of the new implicit TCG method is increased by a factor of two in comparison to that of the standard TCG method and is one order higher than the accuracy of the standard time-discontinuous Galerkin (TDG) method at the same number of degrees of freedom. The new method is unconditionally stable and has controllable numerical dissipation at high frequencies. An iterative predictor/multi-corrector solver that includes the factorization of the effective mass matrix of the same dimension as that of the mass matrix for the second-order methods is developed for the new TCG method. A new strategy combining numerical methods with small and large numerical dissipation is developed for elastodynamics. Simple numerical tests show a significant reduction in the computation time (by 5–25 times) for the new TCG method in comparison to that for second-order methods, and the suppression of spurious high-frequency oscillations.     

Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels

This study is concerned with the effects of alloying elements on fracture toughness in the transition temperature region of base metals and heat-affected zones (HAZs) of Mn-Mo-Ni low-alloy steels. Three kinds of steels whose compositions were varied from the composition specification of SA 508 steel (grade 3) were fabricated by vacuum-induction melting and heat treatment, and their fracture toughness was examined using an ASTM E1921 standard test method. In the steels that have decreased C and increased Mo and Ni content, the number of fine M₂C carbides was greatly increased and the number of coarse M₃C carbides was decreased, thereby leading to the simultaneous improvement of tensile properties and fracture toughness. Brittle martensite-austenite (M-A) constituents were also formed in these steels during cooling, but did not deteriorate fracture toughness because they were decomposed to ferrite and fine carbides after tempering. Their simulated HAZs also had sufficient impact toughness after postweld heat treatment. These findings indicated that the reduction in C content to inhibit the formation of coarse cementite and to improve toughness and the increase in Mo and Ni to prevent the reduction in hardenability and to precipitate fine M₂C carbides were useful ways to improve simultaneously the tensile and fracture properties of the HAZs as well as the base metals.