Effects of photo-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on physical properties of cross-linked polyethylene in artificial hip joints

Osteolysis caused by wear particles from polyethylene in the artificial hip joints is a serious issue. We have used photo-induced radical graft polymerization to graft 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer onto the surface of cross-linked polyethylene (CLPE-g-MPC) in order to reduce friction and wear at the bearing surface of the joint. The physical and mechanical properties of CLPE and CLPE-g-MPC were not significantly different, expect that the friction coefficient of untreated CLPE cups was 0.0075, compared with 0.0009 for CLPE-g-MPC cup, an 88% reduction. After 3.0 × 10⁶ cycles in the hip joint simulator test, we could not observe any wear of CLPE-g-MPC cups. We concluded that the advantage of photo-induced radical graft polymerization technique was that the grafted MPC polymer gave a high lubricity only on the surface and has no effect on the bulk properties of the CLPE substrate.     

Distribution, diversity and regulation of alcohol oxidase isozymes, and phylogenetic relationships of methylotrophic yeasts

In this study, we attempted to classify the methylotrophic yeasts based on diversities of alcohol oxidase (AOD), i.e. zymogram patterns and partial amino acid sequences. According to zymogram patterns for AOD, members of the methylotrophic yeasts separate into two major lineages, one group involving strains having a single AOD and the other group, including Pichia methanolica, Candida pignaliae and C. sonorensis, showing nine AOD isozymes. Based on partial amino acid sequences of AOD, the methylotrophic yeasts could be divided into five groups, and this classification agrees mostly with grouping based on 26S domain D1/D2 rDNA nucleotide sequences, except for some strains. Moreover, the strains having AOD isozymes constitute one group with P. trehalophila, P. glucozyma and Pichia sp. strain BZ159, although these strains are divided into two types, based on amino acid sequences of second AODs. On the other hand, these AOD isozymes consist of two subunits; the first subunits are induced not only by methanol but also by glycerol and pectin, although the second subunits are mainly induced by methanol. These data indicate that AOD isozymes and second AOD genes distribute widely in several methylotrophic yeasts in the natural environment, and second AOD genes may have evolved as methylotrophic genes that can adapt to the environmental conditions of higher methanol concentrations.     

微波场中加热高钛高炉渣的数值模拟

利用微波加热技术在高钛高炉渣内引发裂纹的实验过程中发现炉渣局部区域发生热失控现象.为探寻高钛高炉渣在微波场中产生热失控的原因,使用 FEMAP 和 wave-jω 软件计算了在多模式微波炉中高钛高炉渣及其周围空间内微波场和热三维分布情况,并对比研究了钙钛矿相和普通高炉渣吸收微波的能力.通过计算结果可知几乎所有的微波能都集中在被加热的高钛高炉渣试样中,即微波具有加热高钛渣自身而非周围环境的特点.另外,高钛高炉渣试样中微波场分布不均匀,且分散在炉渣中的钙钛矿相比其他矿物相更易被微波加热.以上 2 因素作用下微波加热高钛高炉渣时局部区域发生热失控现象.     

Identification of global modeshape from a few nodal eigenvectors using simple free-form deformation

A new method, different from common eigenvalue extraction methods, was proposed by Li and Kikuchi (in 8th ARC conference, 2002). It consists of explicit finite-element method and eigenvalue-extraction method in time domain. Even though the new method performs well in extracting eigenvalues, it is difficult to identify global modeshape of the given structure due to large size of time history data. Only some eigenvectors of a few nodal points can be extracted. In this paper, we apply computer animation technique to identify the global modeshape from a few nodal eigenvectors. Free-form deformation (FFD) technique is simply modified—simple FFD—and applied to the identification of global modeshapes. The basic concepts that consist of simple FFD algorithm are Delaunay triangulation and barycentric coordinate. Some numerical examples show good performance for the identification of global modeshape of a given structure.     

Preparation of CdS-doped Glasses from Gels Containing Diethyldithiocarbamatocadmium

CdS-doped SiO₂ glasses were prepared via silica gels containing diethyldithiocarbamatocadmium Cd(S₂CN(C₂H₅)₂)₂. Heat treatment of the gels gave transparent yellow SiO₂glasses doped with hexagonal CdS crystals. In optical absorption and fluorescence spectra, the optical absorption edge and the emission peak clearly exhibited a blue shift, which was attributed to the quantum size effect of the carrier confinement, as the CdS content was decreased. In the fluorescence spectra of the CdS-doped silica glasses, the emission peak was observed only near 500 nm and not observed at longer wavelengths which were known to be present if there were sulfur vacancies.     

Developments in asymmetric hydrogenation from an industrial perspective

Examples of developments in asymmetric hydrogenation from various perspectives, in an effort to improve efficiency, are reported. Discussed in this Account are (1) the improved synthesis of BINAP ligands, (2) the design of SEGPHOS ligands for higher enantioselectivity, (3) a new protocol with fewer reaction steps to synthesize beta-aminoesters, and (4) a novel asymmetric hydrogenation mediated by a copper catalyst.     

Fate of the chlorine and fluorine in a sub-bituminous coal during pyrolysis and gasification

The fate of the chlorine and fluorine present in a sub-bituminous coal from Indonesia during pyrolysis and gasification has been studied with fixed and entrained bed reactors. The rate profile for HCl evolved in the temperature programmed pyrolysis exhibits the main and shoulder peaks at 480 and 600 °C, respectively. Model experiments and subsequent Cl 2p XPS measurements show that HCl reacts with metal impurities and carbon active sites at 500 °C to be retained as inorganic and organic chlorine forms, from which HCl evolves again at elevated temperatures. It is suggested that the HCl observed in the coal pyrolysis may originate from the above-mentioned chlorine functionalities formed by secondary reactions involving the nascent char. In the CO₂ gasification of the 900 °C char at 1000 °C and 2.5 MPa, any measurable amounts of HCl and HF could not be detected even at a high conversion of 75 wt% (daf), suggesting the accumulation of these halogens in the residual char. When the coal is injected into an O₂-blown, entrained bed gasifier at 1200-1400 °C under 2.6 MPa, the partial oxidation proceeds to a larger extent at a higher O₂/coal ratio, whereas the chlorine and fluorine are enriched in the remaining char, and the extent of the enrichment at the latter stage of gasification is larger with the fluorine. The XPS measurements of the chars reveal the presence of the broad F 1 s peak, which can cover a wide range of binding energies attributable to inorganic and organic fluorine. The halogen enrichment during gasification is discussed in terms of secondary reactions of HCl and HF with char.     

Ni-Nb-Sn Bulk Metallic Glass Matrix Composites Fabricated by Microwave-Induced Sintering Process

Using a gas-atomized Ni_59.35Nb_34.45Sn_6.2 metallic glassy alloy powder blended with Sn powder of various contents, Ni-Nb-Sn bulk metallic glassy matrix composites were fabricated by a microwave (MW)–induced sintering process in a single-mode 2.45 GHz MW applicator in a separated magnetic field. The Ni_59.35Nb_34.45Sn_6.2 glassy alloy powder and its mixed powders containing Sn particles could be heated well in the magnetic field. The addition of Sn particles promoted densification of the sintered Ni_59.35Nb_34.45Sn_6.2 metallic glassy powder. Bulk samples without crystallization of the glassy matrix and with good bonding state among the particles were achieved at a sintering temperature of 833 K.     

Analysis of the effects of thermal protein denaturation on the quality attributes of sous‐vide cooked tuna

Traditional (low temperature, long time) and novel (low temperature, short time) sous‐vide cooking of lean tuna were characterized by analyzing the effects of thermal protein denaturation (TPD) on quality attributes, such as color, appearance, shrinkage, drip loss, and texture. TPD was analyzed by differential scanning calorimetry and estimated for several thermal schedules by kinetic analysis, following the dynamic method. When heated at a rate of 10 °C/min, myosin began to denature at around 35 °C. Actin did not denature, even when the temperature rose to approximately 51 °C, until the denaturation of myosin was complete. However, actin began to denature at approximately 58 °C and was completely denatured at 76 °C. Actin denaturation had a stronger effect than myosin denaturation on texture changes, whereas myosin denaturation was responsible for changes in color and appearance. A better preservation of tuna quality was obtained by novel sous‐vide cooking over the traditional sous‐vide method.

Practical applications

The results of this study are useful to both the research community and industry because they provide quantitative characterization of the consequences of sous‐vide cooking method on food quality explained by estimating TPD. Moreover, the kinetic parameters of the denaturation rate collected for kinetic modeling of the TPD of tuna, not only have application to simulate denaturation of actin and myosin under different thermal schedules of sous‐vide cooking, but also they can be used for the analysis of additional thermal treatments.     

From local structure to nanosecond recrystallization dynamics in AgInSbTe phase-change materials

Phase-change optical memories are based on the astonishingly rapid nanosecond-scale crystallization of nanosized amorphous 'marks' in a polycrystalline layer. Models of crystallization exist for the commercially used phase-change alloy Ge(2)Sb(2)Te(5) (GST), but not for the equally important class of Sb-Te-based alloys. We have combined X-ray diffraction, extended X-ray absorption fine structure and hard X-ray photoelectron spectroscopy experiments with density functional simulations to determine the crystalline and amorphous structures of Ag(3.5)In(3.8)Sb(75.0)Te(17.7) (AIST) and how they differ from GST. The structure of amorphous (a-) AIST shows a range of atomic ring sizes, whereas a-GST shows mainly small rings and cavities. The local environment of Sb in both forms of AIST is a distorted 3+3 octahedron. These structures suggest a bond-interchange model, where a sequence of small displacements of Sb atoms accompanied by interchanges of short and long bonds is the origin of the rapid crystallization of a-AIST. It differs profoundly from crystallization in a-GST.