Optical 40-gb/s 3R regenerator with a combination of the SPM and XAM effects for all-optical networks

An all-optical 3R regenerator with a combination of self-phase modulation (SPM) and cross-absorption modulation (XAM) effects is proposed and investigated. Principle performances of the proposed all-optical 3R regenerator were experimentally investigated at a signal bit rate of 40 Gb/s. The all-optical 3R regenerator, which is located at the midpoint of a 1080-km transmission line, successfully provided an approximately 3-dB improvement of the Q-factor both just after regeneration and after totally 1080-km transmission. The chromatic dispersion tolerance of the proposed 3R regenerator was also investigated and successfully enhanced to about twice as wide by introducing a predistortion block configuration including a highly nonlinear fiber (HNLF). It was confirmed that the proposed all-optical 3R regenerator can become one of the strong candidates for the actual deployment of the all-optical network.     

LD抽运的Cr4+∶YAG被动调Q Nd∶YAG激光器

研究了不同谐振腔下不同透射率的Cr4 + ∶YAG调Q的激光输出特性。采用透射率为 82 %的Cr4 + ∶YAG ,在抽运功率 1 1W时 ,激光重复频率小于 3kHz,单脉冲能量达 2 0 μJ ,可以作为微脉冲激光雷达的发射光源。分析和比较了实验结果和理论计算 ,两者吻合较好     

Heat-resisting TCO films for PV cells

We developed new heat-resisting transparent conductive oxide (TCO) films with resistivity of 1.4×10⁻⁴ Ω cm, an optical transmittance of above 80% (at 550 nm) and heat-resisting temperature at above 600 °C. The TCO films consists of fluorine-doped tin oxide films coated on indium–tin oxide films. They were prepared by a spray pyrolysis deposition method on glass substrates. The 100×100 mm² dye-sensitized solar cells (DSCs) were prepared with the TCO films. An energy conversion efficiency of the DSC was improved drastically in comparison to the case with conventional TCO films.     

Thermodynamic properties of the BaO-MnO flux system

Although a great number of works on BaO-bearing fluxes for refining Fe-Cr and Fe-Mn alloys have been carried out, there still remain several unresolved problems on using them in the refining process. The principal aim of the present study is to understand the thermodynamic properties of the BaO-MnO system, which has been shown to be very effective for dephosphorization of Fe-Mn alloys. The activity of manganese oxide in the BaO-MnO flux was measured at 1573 and 1673 K by equilibrating the flux, a Ag-Mn alloy, and a gas mixture of CO and CO₂ as functions of the flux composition and temperature. The influence of BaF₂, which is an effective additive for lowering the melting temperature of the flux, on the thermodynamics of the BaO-MnO system, including the solubility of MnO in the BaO-BaF₂ system, was also investigated.     

Induction of ectopic corticotropic tumor in mouse embryos by exo utero cell transplantation and its effects on the fetal adrenal gland

To establish an in vivo experimental system for developmental endocrinology research, AtT-20 cells, a corticotropic tumor cell line, were transplanted by exo utero manipulation into mouse embryos on embryonic day 14. The induced tumor secreted ACTH in situ, and the circulating ACTH level was elevated. This was the first model for studying the regulation of ACTH in the mouse fetal adrenal in vivo and the first continuous ACTH treatment model in rodent fetuses. The changes in the adrenal gland from the tumor-induced embryos were analyzed by light microscopic morphometry, immunohistochemistry for steroidogenic enzymes, and electron microscopy. In the treated adrenal, the volume of the inner cortical zone was significantly larger than that in controls. In the inner zone, cell density was decreased, and average cell size was increased, whereas bromodeoxyuridine-incorporation was not increased. The enlarged inner zone cells expressed an enhanced level of cytochrome P45011beta, the corticosterone-synthesizing enzyme, and the serum corticosterone level was increased. Electron microscopy showed an active form of the organelles involved in steroidogenesis. These findings indicate that ACTH stimulates both adrenocortical hypertrophy and steroidogenesis in fetal mice. Potential perspectives of the novel paradigm in this research for molecular developmental endocrine study are discussed.     

Surface structures of synthetic diamonds

Diamond crystals of about 2 mm in size were grown by the temperature gradient method using Ni, Ni-Fe alloy and Fe as solvent metals. Several characteristic patterns were seen on the surfaces of the grown diamonds and were found to correspond to the texture of the quenched solvent metals. A vague vein-like pattern appeared when Ni was used. The surface patterns became finer with the increase of the content of Fe in Ni-Fe alloy, and when 70 wt% Fe-30 wt% Ni alloy was used, very fine dendritic patterns were seen on all of the faces of diamond in accordance with the symmetries of the lattice. The patterns are formed by the precipitation of carbon atoms in the space of the dendrites of the solvent metals during the quenching process. Lamellar patterns and etch pits were seen when Fe was used. The patterns are formed when Fe dissolves the diamond surfaces to produce Fe₃C during the quenching process.     

Covalent binding of peroxidized linoleic acid to protein and amino acids as models for lipofuscin formation

The fluorescent substances produced by the reaction of linoleic acid hydroperoxides (LOOH) with ca. 20 different amino acids and bovine serum albumin (BSA) were studied. Only the amino acids, lysine, glycine, arginine, histidine and phenylalanine, gave products with strong fluorescent properties. Products of lysine had a fluorescence intensity of ca. 10 times those of glycine and 100 times those of phenylalanine. The N-acylation of amino acids greatly reduced the fluorescence of the products of the reaction except lysine and arginine. The fluorescence of the products of the reaction of LOOH with N-acetyl BSA was only ca. 25% of the control BSA under the same conditions. It appeared that the substances formed from the reaction of LOOH with BSA were crosslinked polymers as evidenced by column chromatography and polyacrylamide gel electrophoresis. These products were insoluble in common organic solvents and their fluorescent intensities correlated well with the thiobarbituric acid (TBA) test. These observations appear to be highly important in the formation of lipofuscin substances, particularly those associated with the aging pigments which accumulate during aging in mammalian tissues.     

Asymmetric addition of thiol to diene polymer in the presence of optically active amines as catalyst

The asymmetric addition reaction of thiolacetic acid or benzylmercaptan to diene polymer (natural rubber, cis- and trans-1,4-polyisoprene, _cis-1,4-polybutadiene, various styrenebutadiene copolymers and alternating acrylonitrile-butadiene copolymer) by optically active catalysts such as d-bornylamine ([α]d?45.2°), l-aspartic diethyl ester (?11.2°), l-aspartic dibutyl ester (?5.3°) were carried out in benzene at room temperature to 90°C. The optically active polymers were obtained from natural rubber and cis-1,4- and trans-1,4-polyisoprene, but were not obtained from cis-1,4-polybutadiene, styrene-butadiene copolymers, and butadiene-acrylonitrile copolymer. The [α]²⁵_D value of optically active derivatives was ?0.1° ～ ?1.0° (in benzene), and the optical rotatory dispersion curves were found to fit the simple Drude equation.     

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.     

Hiding an image with a light-scattering medium and use of a contrast-discrimination method for readout

Hiding image data with a material such as a light-scattering medium is useful as an initial stage of data protection, because the hidden image can be detected only by observation with a specific technique. A light-scattering medium is used to hide the image data, and a low-temporal-coherence interferometer performs the readout processing. A new readout method for detecting pixel values of the image is proposed to overcome spatial variation of the light intensity and distortion of the interference fringes. The introduction of spatial coding further improves the performance by overcoming spatial variations of the light-scattering medium and variations in the reflectance of given pixels.