The nuclear actin-related protein Act3p/Arp4p is involved in the dynamics of chromatin-modulating complexes

Chromatin remodelling and histone-modifying complexes govern the modulation of chromatin structure. While components of these complexes are diverse, nuclear actin-related proteins (Arps) have been repeatedly found in these complexes from yeast to mammals. In most cases, Arps are required for functioning of the complexes, but the molecular mechanisms of nuclear Arps have as yet been largely unknown. The Arps and actin, sharing a common ancestor, are supposed to be highly similar in the three-dimensional structure of their core regions, including the ATP-binding pocket. The Arp Act3p/Arp4p of Saccharomyces cerevisiae exists within the nucleus, partly as a component of several high molecular mass complexes, including the NuA4 histone acetyltransferase (HAT) complex, and partly as uncomplexed molecules. We observed that mutations in the putative ATP-binding pocket of Act3p/Arp4p increased its concentration in the high molecular mass complexes and, conversely, that an excess of ATP or ATPgammaS led to the release of wild-type Act3p/Arp4p from the complexes. These results suggest a requirement of ATP binding by Act3p/Arp4p for its dissociation from the complexes. In accordance, a mutation in the putative ATP binding site of Act3p/Arp4p inhibited the conversion of the NuA4 complex into the smaller piccoloNuA4, which does not contain Act3p/Arp4p and exhibits HAT activity distinct from that of NuA4. Although the in vitro binding activity of ATP by recombinant Act3p/Arp4p was found to be rather weak, our observations, taken together, suggest that the ATP-binding pocket of Act3p/Arp4p is involved in the function of chromatin modulating complexes by regulating their dynamics.     

Filling behavior of UV nanoimprint resin observed by using a midair structure mold

The filling behavior of resin during UV nanoimprint lithography (UV-NIL) was observed by using a “midair structure mold” and by changing the imprint pressure. The midair structure molds were fabricated by electron beam lithography (EBL) using hydrogen silsesquioxane (HSQ) as a negative tone resist. After the fabrication of midair structure mold, two types of surface treatment molds, which were with or without release coating, were prepared. Using these molds, the filling behavior of a UV curable resin was investigated at various pressures. The results indicate that a pressure of approximately 1.2 MPa is necessary for complete filling in the case of molds treated with a release agent. This method demonstrates effect of a release coating for UV-NIL.     

Isotopic evidence in tree rings for historical changes in atmospheric sulfur sources

Little is understood about the usefulness of sulfur isotopic ratios (sigma 34S) in tree rings because the sulfur content in rings is generally insufficient for analysis using conventional methods. We present sigma 34S values of the water-soluble and the organically bound sulfur fractions in rings of coniferous trees grown in Japan, analyzed using a large-volume oxygen bomb. Comparing the sigma 34S values of the organically bound fraction in tree rings with past atmospheric sulfur concentrations and with those of their sources, we find clear evidence that the sigma 34S values of the organically bound fraction in the rings are dependent upon the values of the atmospheric sulfur sources. The evidence suggests that the sigma 34S values in tree rings are a useful chronological proxy for evaluating possible causes of past atmospheric sulfur pollution.     

In-process measurement of topography change of grinding wheel by using hydrodynamic pressure

This paper deals with an in-process measurement method for topography change of a grinding wheel, which can apply to wet grinding. A pressure sensor is set beside a grinding wheel with a small gap. When grinding fluid is dragged into the gap, hydrodynamic pressure, which corresponds to the gap length and the topography, can be measured. This method is applied to a cylindrical grinding machine. No electromagnetic properties of a workpiece and a grinding wheel affect measured results. The pressure is decreased with the increase of the gap length when the grinding fluid is supplied in the tangential direction of the grinding wheel. Spectra of the pressure are measured with an FFT analyzer. Higher frequency components are increased with the progress of grinding because of turbulent flow. Loading and dulling of a grinding wheel can be detected by the proposed method as well as its wear.     

Residual stress evaluation in resin-molded IC chips using finite element analysis and piezoresistive gauges

The high residual stress in a resin-molded electronic package sometimes makes the electronic functions unstable. Therefore the residual stress in electronic packages, especially on the top surfaces of semiconductor chips, should be evaluated. The objective of this study is to present a simple method for evaluating residual stress in resin-molded semiconductor chips using a combination of experimental and numerical methods. The actual residual stress of the packaging process was measured by using test chips that included piezoresistive gauges. A linear thermoelastic finite element analysis was then carried out using a three-dimensional model. The finite element analysis was performed under a stress-free temperature determined by the temperature dependence of the residual stress, which was experimentally measured by using the piezoresistive test chips. The measured residual stress using the test chips agreed well with the results of the finite element analysis. It was therefore confirmed that the present evaluation method, combining experimental and numerical methods, is reliable and reasonable.     

Numerical Characterization of Dosimetry,Human Body Resistance and Heart Current Resulting from Power-Frequency Touch Current for an Anatomically Realistic Human Model

Characteristics of power-frequency touch current inside an anatomically realistic human model of Japanese adult were numerically analyzed under various scenarios of current paths using a modified scalar potential finite difference (SPFD) method. Then, complex distributions of the current density in the model were visually illustrated. Results of the dosimetry of current density for excitable tissues indicates that the touch current within the reference level (0.5 mA) does not always satisfy the basic restriction of current density in the light of ICNIRP guideline for general public. Two sets of the internal body resistances R_i (i.e., 1130–1510Ω and 1460–1920Ω) are obtained, depending on the conductivity sets used. Although R_i considerably depends on the current scenario concerned, the highest values of Ri were obtained for the hand-to-hand scenario, regardless of the conductivity set. The inhomogeneous model always gives a higher value of R_i than does the homogeneous model that has a single conductivity equivalent to the weighted-average conductivity of the inhomogeneous model. It is found that the conductivity of muscle has significant influence on R_i, and that the resistance around the wrist and ankle is one of the predominant parameters to decide R_i. It is clearly shown that the current scenarios affect the pattern of the heart current flow, especially the direction of it, to a large extent. It is found that a current of 34–40% of touch current flows into the heart, and then the heart-current ratio is remarkably larger than old data. The heart-current factors of around 0.85 obtained are almost independent of the current scenarios, unlike those indicated in IEC60479-1, provided that the direction of heart current is ignored. © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Identification of HLA-A24-restricted epitopes with high affinities to Hsp70 using peptide arrays

Heat shock protein 70 (Hsp70) family members are known as facilitators of immune responses by interacting with receptors on antigen-presenting cells leading to Hsp70-peptide uptake and antigen cross priming. Here, identification of human leukocyte antigen (HLA)-A24-restricted epitopes was achieved using peptide arrays for evaluation of their affinities to Hsp70 and HLA-A24 binding prediction tools. Using Hsp70 as the model antigen, the GYPVTNAVI and VFQHGKVEI peptides were identified as antigens. These peptides actually bound to HLA-A24 in the stabilization assay using T2-A*2402 cells, and induced a strong peptide-reactive cytotoxic T lymphocyte response in HLA-A24 transgenic mice after vaccination.     

Kinetically Stable Bicelles with Dilution Tolerance,Size Tunability,and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine, DPPC) and a sodium‐cholate‐derived surfactant (SC‐C₅) at room temperature formed phospholipid bilayer fragments that were edge‐stabilized by SC‐C₅: so‐called “bicelles”. Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC‐C₅ has an exceptionally low critical micelle concentration (<0.5 mm ), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine‐tuned by altering the molar ratio of DPPC to SC‐C₅. On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC‐C₅. By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.     

Relationship between degree of polymerization and optical and thermal properties of fluorene in polycarbonate polymers

The influences of average degree of polymerization (D_p) and terminal group on thermal and optical properties of high refractive indexed transparent polymers were investigated. In this study, 9,9‐bis[4–(2‐hydroxyethoxy) phenyl] fluorene (BPEF) homo polymer was selected because it has been used as a representative monomer in high refractive index polymers as well as its unique property. BPEF has stable amorphous phase and reacts like a polymer. Its unique reaction allows continuous investigation from monomer to polymer. For hydroxyl‐terminated polymer, the refractive index (n_d) decreased with increasing D_p. On the other hand, for a phenolic‐terminated group, n_d increased with increasing D_p, and both converged to same value in high D_p region. As for glass transition temperatures (T_g), both terminal group series were increased as D_p increased. Though T_g of hydroxyl‐terminated polymer was higher than that of phenolic‐terminated polymer in the low D_p region, both converged to the same value and the inverse number of T_g had linear correlation against the weight percentage of carbonyl groups (CO), which was calculated by D_p. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45042.