An experimental setup for high resolution 10.5 eV laser-based angle-resolved photoelectron spectroscopy using a time-of-flight electron analyzer

We present an experimental setup for laser-based angle-resolved time-of-flight photoemission. Using a picosecond pulsed laser, photons of energy 10.5 eV are generated through higher harmonic generation in xenon. The high repetition rate of the light source, variable between 0.2 and 8 MHz, enables high photoelectron count rates and short acquisition times. By using a time-of-flight analyzer with angle-resolving capabilities, electrons emitted from the sample within a circular cone of up to ±15° can be collected. Hence, simultaneous acquisition of photoemission data for a complete area of the Brillouin zone is possible. The current photon energy enables bulk sensitive measurements, high angular resolution, and the resulting covered momentum space is large enough to enclose the entire Brillouin zone in cuprate high-T(c) superconductors. Fermi edge measurements on polycrystalline Au shows an energy resolution better than 5 meV. Data from a test measurement of the Au(111) surface state are presented along with measurements of the Fermi surface of the high-T(c) superconductor Bi(2)Sr(2)CaCu(2)O(8 + δ) (Bi2212).     

LC-circuit calorimetry

We present a new type of calorimeter in which we couple an unknown heat capacity with the aid of Peltier elements to an electrical circuit. The use of an electrical inductance and an amplifier in the circuit allows us to achieve autonomous oscillations, and the measurement of the corresponding resonance frequency makes it possible to accurately measure the heat capacity with an intrinsic statistical uncertainty that decreases as ~t(m)(-3/2) with measuring time t(m), as opposed to a corresponding uncertainty ~t(m)(-1/2) in the conventional alternating current method to measure heat capacities. We have built a demonstration experiment to show the feasibility of the new technique, and we have tested it on a gadolinium sample at its transition to the ferromagnetic state.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.     

Coherent microscopy by laser optical feedback imaging (LOFI) technique

The application of the non-conventional imaging technique LOFI (laser optical feedback imaging) to coherent microscopy is presented. This simple and efficient technique using frequency-shifted optical feedback needs the sample to be scanned in order to obtain an image. The effects on magnitude and phase signals such as vignetting and field curvature occasioned by the scanning with galvanometric mirrors are discussed. A simple monitoring method based on phase images is proposed to find the optimal position of the scanner. Finally, some experimental results illustrating this technique are presented.     

Effect of thermal alkaline pretreatment on the anaerobic digestion of wasted activated sludge

The effect of alkaline pretreatment of waste-activated sludge, using two models to study the sequential hydrolysis rates of suspended (Sanders' surface model) and dissolved (Goel's saturation model) solids, on the mesophilic and thermophilic anaerobic digestion rate is evaluated. The pretreatment, which reduces the size of the solids, increases the reaction rate by increasing the surface area and the specific surface hydrolysis constant (K(SBK)); at thermophilic conditions from 0.45 x 10(-3) kg m(-2) d(-1) for the fresh sludge to 0.74 x 10(-3) kg m(-2) d(-1) for the pretreated sludge and at mesophilic conditions these values are 0.28 x 10(-3) kg m(-2) d(-1) and 0.47 x 10(-3) kg m(-2) d(-1) confirming the usefulness of a pretreatment for solids reduction. But for soluble solids, the thermoalkaline pretreatment decreases the reaction rates by inducing a competitive inhibition on the thermophilic anaerobic digestion rate while in the mesophilic range, a non-competitive inhibition is observed. A mathematical simulation of the consecutive reactions, suspended solids to dissolved solids and to methane in staged anaerobic thermophilic-mesophilic digestion, shows that with 4% suspended solids concentration it is better not to use a thermoalkaline pretreatment because overall solids reduction and total methane production are not as good as without pretreatment.     

Effects of sludge retention time and biosurfactant on the treatment of polyaromatic hydrocarbon (PAH) in a petrochemical industry wastewater

A laboratory-scale aerobic activated sludge reactor (AASR) system was employed to investigate the effects of sludge retention time (SRT) on the removal of three polyaromatic hydrocarbons (PAHs) with low benzene rings [(acenaphthene (ACT), fluorene (FLN) and phenanthrene (PHE)] and six PAHs with high benzene rings [(benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene, dibenz[a,h]anthracene (DahA), benzo[g,h,i]perylene (BghiP)] in the presence of rhamnolipid (RD), emulsan (EM) and surfactine (SR) biosurfactants. This study showed that biosurfactants enhance the PAH biodegradation by increasing the biomass growth. RD exhibits a better performance than the other biosurfactants in the removal of the chemical oxygen demand (COD) and PAHs. At a RD concentration of 15 mg/L aerobic treatment for 25 days, SRT was enough to remove over 95% of total PAHs, and COD(dis). Under the same conditions 75% of COD originating from the inert organics (COD(inert)) and 96% of COD originating from the inert soluble microbial products (COD(imp)) were removed. At 25 days SRT and 15 mg/L RD concentration, about 88% of PAHs were biodegraded by the AASR system, 4% were accumulated in the system, 3% were released in the effluent, and 5% remained in the waste sludge.     

Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high amounts of Gram-negative bacteria, endotoxin, and thermophilic actinomycetes. High differences between exposure levels were observed with regard to workplaces and tasks. Dryers and conveyors in operation were closed, and the monitoring task in the dryer room was associated with low levels of personal exposure, close to background levels. Conversely, cleaning and maintenance of the dryer and conveyors required the equipment to be opened, giving significantly higher task-based personal exposure levels. The fall of dried sludge into indoor containers resulted in high emission and spreading of dust. Mean personal exposure levels to fungi were moderate or low for all tasks. Based on the results of this study, appropriate means of operational control and personal protection are being developed and implemented on sites.