Poly(3‐chlorothiophene) films prepared by the direct electrochemical oxidation of 3‐chlorothiophene in mixed electrolytes of boron trifluoride diethyl etherate and sulfuric acid

3‐Chlorothiophene (CT) was electrochemically polymerized in mixed electrolytes of a boron trifluoride diethyl etherate solution containing 0–20% (by volume) sulfuric acid. The oxidation potentials of the monomer in these media were measured to be only 1.06–1.31 V (vs Ag/AgCl). These values were much lower than that of CT in acetonitrile and 0.1 mol/L (Bu)₄NBF₄ (1.92 V vs Ag/AgCl). Poly(3‐chlorothiophene) (PCT) films with conductivities of 0.1–2 S cm^?1 were obtained. The structure, morphology, and electrochemical behavior of the PCT films also were investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 502–509, 2003     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.     

超声振动对聚合物结构性能的影响

介绍了聚合物挤出成型过程中的超声振动技术，并对挤出模头引入超声振动后对聚合物物理机械性能、相容性、结晶性能的影响进行了评述。     

磷钨杂多酸催化乙醇和乙酸酯化反应的研究

以多孔钛片为支撑体,制备了磷钨杂多化合物薄膜化催化剂。在膜催化器上,考察了薄膜化催化剂对乙醇和乙酸合成乙酸乙酯的催化性能。结果表明,薄膜化催化剂显著提高了催化活性;当n(乙醇)∶n(乙酸)=1.5∶1,原料流量2.55mL/h;在反应温度为110℃时,乙酸乙酯产率可达97%,且薄膜催化剂的处理很方便,不污染环境。     

四种杀菌剂对枸杞黑果病的防治效果

枸杞黑果病是枸杞产区的主要病害．发病后造成黑花、黑蕾和黑果，使枸杞产量降低，品质变劣。为探明四种杀菌剂对枸杞黑果病的防治效果及最佳剂量，2003年对下述四种杀菌剂进行了田间药效对比试验，调查防效结果如下：20％三苯基醋酸锡WP450～281g／hm^2(以有效成分计，下同)，20％氟硅唑EC21．08g／hm^21．5％噻霉酮EW16、88～21．08g／hm^2、40％氟硅唑EC450g／hm^2和70％甲基托布津WP787．5g/hm^2对枸杞黑果病防效均在88．25％以上。经LSD检验各处理间防效无显著差异。     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

发酵工厂中空气净化工艺的合理选择

从节能、降低成本、优化工艺的角度，对无菌空气制备过程中，空气预处理流程的选择、空气净化设备、过滤介质以及设备的遴选进行探讨，以实现工艺和工程设计的优化结合。     

低熔点合金填充聚合物材料断口形貌研究

研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。实验结果表明:不同的合金对体系的影响很大,低分子量、低结晶性聚合物,高的成型加工温度可提高材料的相容性。     

转化乳剂的离子电导和光电导研究

本文研究了ＡｇＢｒＣｌ转化乳剂的离子电导和光电导。随着乳剂中溴含量的增高，其离子电导也随之升高，而光电子寿命则降低。ＡｇＢｒＣｌ乳剂的离子电导主要取决于其组成；ＡｇＢｒＣｌ转化乳剂的光电子寿命主要受隙间银子浓度的影响，隙间银离子浓度越大，光电子寿命越短。     

一种基于网络信息平台的影像显示方法

针对大幅面遥感影像显示时兼顾大范围和高分辨率的要求,提出了一种基于计算机网络和地理信息平台的显示方法。通过调度局域网中多台计算机终端进行配合,使不同终端同时显示一幅超大影像的不同部分,相邻终端显示影像的位置无缝衔接,实现了低成本对一幅超大影像高分辨率、大范围显示的效果。该方法具有很好的扩展性,理论上可以实现对任意大的影像进行高分辨率显示。