Combined-Stage Sintering Model

By focusing on the similarities between the three stages of sintering, a single equation is derived that quantifies sintering as a continuous process from beginning to end. The microstructure is characterized by two separate parameters representing geometry and scale. The dimensionless geometry parameter, denoted T, comprises five scaling factors that relate specific microstructural featuers (e.g., surface curvature) to the scale (grain diameter). Calculations of T from experimental data show (a) agreement with computer simulations of initial-stage sintering, (b) the effect of surface diffusion on T, and (c) changes in T with microstructural evolution during sintering. Application of the model to the design of firing schedules and the study of microstructural geometry effects on sintering is discussed.     

The globally Bi-3-connected property of the honeycomb rectangular torus

The honeycomb rectangular torus is an attractive alternative to existing networks such as mesh-connected networks in parallel and distributed applications because of its low network cost and well-structured connectivity. Assume that m and n are positive even integers with n ? 4. It is known that every honeycomb rectangular torus HReT(m,n) is a 3-regular bipartite graph. We prove that in any HReT(m,n), there exist three internally-disjoint spanning paths joining x and y whenever x and y belong to different partite sets. Moreover, for any pair of vertices x and y in the same partite set, there exists a vertex z in the partite set not containing x and y, such that there exist three internally-disjoint spanning paths of G-{z} joining x and y. Furthermore, for any three vertices x, y, and z of the same partite set there exist three internally-disjoint spanning paths of G-{z} joining x and y if and only if n ? 6 or m = 2.     

三嗪类化合物的合成及其产酸性能研究

合成了一系列的三嗪类光生酸剂1a-1e，确定了它们的结构，并对1e在乙腈溶剂中365和405nm光下的曝光分解产酸性能进行了初步的定量研究．结果表明，在测定浓度范围内分解量子产率和产酸量子产率基本上都不随浓度的变化而变化，在405nm光下比在365nm光下有更高的分解和产酸量子效率．有关这类化合物的光生酸性能与曝光波长的关系正在进一步研究中．     

基于IPv6校园网的智能选课系统的J2EE架构的设计与实现

通过分析IPv6校园网自主学习模式下的自主选课问题,提出了利用J2EE技术构建基于IPv6校园网的智能选课系统的总体结构及具体实现.     

酸性染料与分散染料同浴浸染单板工艺实践

厚单板染色加工难以获得良好的透染性、均染性和较高的色牢度。采用高温高压工艺和分散性、渗透性较好的染料浸染厚单板，可以获得良好的染色效果。     

THE APPLICATION OF COKELET''''S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative waveangular frequency in wave-current field were calculated in this paper.It is indicated by numeri-cal calculation that if the water depth is not too small,the result given by authors'calculationare very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel-ative wave angular frequency by linear wave theory;but if water depth is rather small,thereare some discrepancy,     

Information technology innovations: general diffusion patterns andits relationships to innovation characteristics

While many scholars of organizational innovations have examined characteristics of innovations such as relative advantage and complexity and how they facilitate the adoption of an innovation by organizations, others have used mathematical models to fit diffusion patterns. In this study, the authors attempt to integrate these two areas of inquiry and explore the possibilities to predict diffusion patterns based on characteristics of the innovation and the adopting entities. Based on a cross-sectional sample of 313 large American firms, 20 information technology (IT) innovations were examined and their diffusion patterns assessed with respect to models that espoused internal and external influence. The mixed influence model (Bass model) was chosen as a robust common representation for the set of diffusion patterns. However, the external influence as represented by the coefficient of innovation was found to be extremely small and the internal influence dominates for all innovations. The other two parameters of the model, the saturation level and the coefficient of imitation, which represents internal influence, were then used to perform a cluster analysis. Five clusters of technologies emerged, and the potential relationships between their innovation characteristics and diffusion patterns were explored. Rigorous examination of these potential relationships by future researchers may result in practical methods for predicting patterns of IT innovation diffusion based on innovation and technology characteristics     

The effect of the EAAEAE insert on the property of human metallothionein-3

MT3 shows apparently different properties and function fromMT1 even though they have 70% sequence homology. Possibly thetwo inserts, Thr5 and a negatively charged hexapeptide at position-55in MT3, play important roles. A series of MT3 variants aroundthe EAAEAE hexapeptide have been prepared by site-directed mutagenesisand their properties and reactivity towards pH, EDTA and DTNBhave been studied. Our detailed studies revealed that the EAAEAEinsert is essential to the property of MT3. It is the hexapeptideinsert, to some extent, making the MT3     

On/off cycling under multiple stresses

The authors describe an experiment, a model, and an analytic method for on/off vs. continuous policy evaluation. The methodology was developed and verified through experimentation. An experimental life-test of small DC motors was designed and performed; it involved on/off cycling vs. continuous operation under multiple stresses. A stress-factor reliability model based on the two-parameter Weibull proportional-hazards life distribution was fitted to the data. The analysis provides an estimate of the model parameters for the life distribution of the DC motors under two operating policies, while under multiple stresses. The characteristic life was related to the explanatory covariates: voltage, on/off cycling, and load. Due to the proportional hazards (common Weibull shape) nature of the model, acceleration factors were calculated to relate the stress levels. The reliability model was extended to develop a simple rule to aid in a decision between on/off cycling and continuous-run policies (to achieve higher reliability). The proposed model (with covariates) allows a much broader approach to reliability modeling than the usual Weibull model (without covariates) because it predicts the reliability under various environmental combinations     

碱聚二元体系黏度稳定性研究

活性碱NPS2是白色或无色粒状商品,1%溶液pH值为10.考察了由NpS-2和HPAM HTP(分子量2.85×107,水解度22.0%)组成的碱聚二元体系63℃、7.34 s-1下的黏度性能.8.0 g/L NPS-2 1.5 g/L HTP蒸馏水溶液,在63℃、曝气或无氧条件下老化印天,黏度损失分别为91%和25%.在很宽的加量范围考察外加各种阳离子对该二元溶液曝气3小时的黏度的影响,50 mg/L的Ca22 、Mg2 、Ca2 Mg2 (11)和10 mg/L的Fe2 使黏度分别下降66.9%、73.4%、76.3%和87.4%;Ca2 、Mg2 可与NPS-2反应生成沉淀;Fe2 在较低浓度时使黏度升高,较高浓度时使黏度下降.该二元溶液剪切后的黏度,随3000 1/S剪切时间延长(0.5～9.0 min)而下降,静置(4 h)后黏度恢复幅度则大体相同,剪切5 min后黏度随剪切速率增加(1000～5000 1/s)而下降,≥4000 1/s时黏度不再能恢复.含1.5g/L HTP)的二元溶液的黏度随NPS-2浓度的增加(0～15 g/L)而持续下降,不同NPS-2浓度(6.0～12.5 g/L)的二元溶液的黏度随温度升高(30～80℃)大体上呈直线下降.图8参5.