Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Enhancement in CO oxidation activity of nanosized CexZr1−xO2 solid solutions by incorporation of additional dopants

The influence of Hf, Pr and Tb dopant cations on structural and catalytic properties of nanosized Ce_xZr_1?xO₂ solid solutions has been investigated. A wide range of analytical techniques are utilized to characterize the synthesized materials, and the catalytic activity is evaluated for CO oxidation. XRD, Raman, SEM and TEM results suggested formation of dopant cation incorporated ceria–zirconia solid solutions with highly homogeneous morphology and lattice defects. The CO-TPR measurements revealed an enhanced reducibility of Ce_xZr_1?xO₂ which is reflected in their better catalytic activity. The role of Tb⁴⁺/Tb³⁺ and Pr⁴⁺/Pr³⁺ redox couples in facilitating a higher activity has been addressed.     

Electrospinning of linear homopolymers of poly(methyl methacrylate): exploring relationships between fiber formation, viscosity, molecular weight and concentration in a good solvent

A series of seven linear homopolymers of poly(methylmethacrylate) ranging from 12,470 to 365,700 g/mol M_w, were utilized to further explore scaling relationships between viscosity and concentration in a good solvent at 25 °C and to investigate the impact of these relationships on fiber formation during electrospinning. For each of the polymers investigated, chain dimensions (hydrodynamic radius and radius of gyration) were measured by dynamic light scattering to determine the critical chain overlap concentration, c^*. The experimentally determined c^*, was found to be in good agreement with the theoretically determined value that was calculated by the criteria c^*∼1/[η], where the intrinsic viscosity was estimated from the Mark-Houwink parameters, K and a (at 25 °C in dimethyl formamide) obtained from the literature. The plot of the zero shear viscosity vs. c/c^* distinctly separated into different solution regimes, viz. dilute (c/c^*<1), semidilute unentangled (1<c/c^*<3) and semidilute entangled (c/c^*>3). The crossover between semidilute unentangled and semidilute entangled regimes in the present investigation occurred at c/c^*∼3, which, therefore, marked the onset of the critical chain entanglement concentration, c_e, according to the procedure utilized by Colby and co-workers [Colby RH, Rubinstein M, Daoud M. J de Phys II 1994;4(8):1299-310. [52]]. Electrospinning of all solutions was carried out at identical conditions to ascertain the effects of solution concentration, molecular weight, molecular weight distribution and viscosity on fiber formation and morphological features of the electrospun material. Only polymer droplets were observed to form from electrospinning of solutions in the dilute concentration regime due to insufficient chain overlap. As the concentration was increased, droplets and beaded fibers were observed in the semidilute unentangled regime; and beaded as well as uniform fibers were observed in the semidilute entangled regime. Uniform fiber formation was observed at c/c^*∼6 for all the narrow MWD polymers (M_w of 12,470-205,800 g/mol) but for the relatively broad MWD polymers (M_w of 34,070 and 95,800 g/mol), uniform fibers were not formed until higher concentrations, c/c^*∼10, were utilized. Dependence of fiber diameter on concentration and viscosity was also determined, viz. fiber dia∼(c/c^*)^3.1 and respectively. These scaling relationships were in general agreement with that observed by Mckee et al. [McKee MG, Wilkes GL, Colby RH, Long TE. Macromolecules 2004;37(5):1760-67. [33]].     

Modeling evidence in support of coagulative nucleation theory

An extensive lumped model was developed for emulsion polymerization. It incorporated all of the complex processes: aqueous‐phase radical balances for all radical species arising from initiator decomposition and from exit; determination of radical number inside the particles by balance among rates of radical entry into, exit from, and termination inside the particles; determination of the monomer concentration inside the particles and in the aqueous phase by a thermodynamic equation; and particle formation by micellar, homogeneous, and coagulative nucleation. Model validation was done for the system with styrene (monomer), potassium persulfate (initiator), and sodium dodeceyl sulfate (emulsifier) and for the variables, which included the duration of nucleation, conversion at the end of nucleation, and total number of particles formed. The validation process revealed that coagulation during nucleation needed to be included in the model, even for emulsifier concentrations above the critical micelle concentration. The model predictions were in good quantitative agreement with the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation

Polymeric mucoadhesive pellets of nifedipine were designed using computer software and they were prepared by extrusion-spheronization using HPMC K15M and κ-carrageenan with microcrystalline cellulose. A randomized rotatable two factor central composite design was applied for assessment of influence of two independent variables such as concentration of κ-carrageenan and HPMC K15M on dependent variables. Pellets were characterized by FTIR, DSC, SEM, flow properties, particle size, abrasion resistance, sphericity, drug content, percent production yield, in vitro drug release, ex vivo mucoadhesion, stability studies and similarity factor. The optimized formulation was selected based on criteria of sphericity nearest to 1.0 with maximum cumulative drug release percentage. Formulation NF6 exhibited sufficient porous spheres, free flowing and smooth surface mucoadhesion of 91.34 % and drug content 98.22 ± 0.37 %. Kinetic modeling revealed that the formulation followed the Higuchi model and showed the Quassi-Fickian drug release mechanism. The similarity factor, F2 value, was found to be 74 ± 6 and there was no significant change in drug content and ex vivo mucoadhesion after 90 days at 40 ± 2 °C, and 75 ± 5 % RH clearly indicated the optimized batch NF6 was stable. Thus, it can be concluded that use of κ-carrageenan, microcrystalline cellulose and HPMC K15M at the 20:35:10 w/w ratio could provide an effective carrier for enhancement of sphericity and sustained release of matrix pellets.     

Anomalous electrical transport properties of PVA–Ag composite films below room temperature

The direct current (dc) and alternate current (ac) electrical transport property of polyvinyl alcohol–silver (PVA–Ag) composites has been investigated within a temperature range of 77 ≤ T ≤ 300 K and in the frequency range of 20 Hz to 1 MHz in the presence as well as in the absence of a transverse magnetic field up to 1 T. The dc conductivity follows variable range hopping model. The magnetoconductivity of the samples undergoes a change from negative to positive values with the incorporation of Ag in PVA matrix, which can be interpreted by the dominancy of the forward interference effect prevailing over the wave function shrinkage effect. The ac conductivity follows a power law of frequency, whereas the temperature dependence of frequency exponent “s” can be explained by correlated barrier hopping model. The dielectric behavior of the samples has been governed by the grain and interfacial grain boundary resistance and capacitance. Two activation behaviors are observed from the analysis of grain and interfacial grain boundary contributions. POLYM. COMPOS., 33:1941–1950, 2012. © 2012 Society of Plastics Engineers     

Process Variation Study of SELBOX Inverted- T Junctionless FinFET for High-Performance Applications

This work investigates the performance of the inverted-T (IT) junctionless (JL) FinFET with selective buried oxide (SELBOX) topology. The electrical charac     

Production of granola breakfast cereal by fluidised bed granulation

In the fluidised bed granulation process the effect of nozzle air pressure and binder spray rate on key aggregate quality attributes were studied. The experimental results show that a decrease in nozzle air pressure leads to larger mean granule size. The combination of lowest nozzle air pressure and lowest binder spray rate results in granules with the highest levels of hardness and crispness. The combination of low nozzle air pressure and low binder spray rate results in the least distribution span. Granola hardness was affected by nozzle air pressure. Nozzle air pressure and binder spray rate did not have significant effect on crispness.     

Development of mefenamic acid–loaded polymeric microparticles using solvent evaporation and spray-drying technique

Ethyl cellulose (EC) and Eudragit RL-100 (ERL-100) were used for the preparation of sustained released microparticles of mefenamic acid (MFN) by using oil-in-oil (o/o) solvent evaporation as well as spray drying. A Plackett-Burman design was employed using Design-Expert software. The resultant microparticles were characterized for their size, surface morphology, encapsulation efficiency, and drug release. Imaging of microparticles was performed by field emission scanning electron microscopy. The drug and polymer interaction was investigated by Fourier transform infrared (FTIR) spectroscopy and X-ray powder diffractometry (XRPD). The microparticles showed encapsulation efficiency in the range of 29.44 to 89.20% by solvent evaporation and 83.73 to 96.69% by spray drying. The surface of the microparticles was smooth, round, and regular, without any erosion and cracking. The size of the microparticles was found to be in the range of 6.55 to 41.1 µm. FTIR analysis confirmed no interaction of MFN with the polymers. XRPD showed the dispersion of the drug within the microparticle formulation. These results helped in finding the optimum formulation variables for encapsulation efficiency (EE) of microparticles.