A Complete Separation of Hexane Isomers by a Functionalized Flexible Metal Organic Framework

The separation ability of branched alkane isomers (nHEX, 3MP, 22DMB) of the flexible and functionalized microporous iron(III) dicarboxylate MIL‐53(Fe)‐(CF₃)₂ solid is evaluated through a combination of breakthrough experiments (binary or ternary mixtures), adsorption isotherms, X‐ray diffraction temperature analysis, quasi‐elastic neutron scattering measurements and molecular dynamics simulations. A kinetically controlled molecular sieve separation between the di‐branched isomer of hexane 22DMB from a mixture of paraffins is achieved. The reported total separation between mono‐ and di‐branched alkanes which was neither predicted nor observed so far in any class of porous solids is spectacular and paves the way towards a potential unprecedented upgrading of the RON of gasoline.     

Determination of scattering parameters of junctions associated with electromagnetic topology

This paper is dedicated to the determination of topological S parameters in the transmission line networks. We are especially interested in ideal junctions which consist of short circuit connections. For this type of junctions, it is impossible to deduce the S parameters from the usual impedance or admittance matrices which are not defined in this case. We suggest a method allowing a direct calculation of S. This procedure is described and then carried out for a two wire fork. At last, an experimental application is given for this model.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Network-controlled mobility within radio access networks based onWLAN technologies

This article presents a network-controlled approach of user terminal mobility within anIP based WirelessLAN Access Network. In a first part, this article makes a review of the mobility support, on the subject of emergingWLAN technologies asHIPERLAN/2 andIEEE 802.11, on the one hand, and, regardingIP networks as currently studied withinIETF, on the other hand. Both types ofIP mobility protocols are presented, either global mobility protocols such as MobileIP, or local mobility management protocols (micro mobility). In the next part, the overall principles of our mobility management approach are explained; this approach is based on the implementation of a new network entity dedicated to the control of user terminal mobility. The last part details a practical implementation of this approach. The implementation is carried out on the basis of Hierarchical MobileIPv6 (HMIPv6). The experimental results confirm the importance to carefully plan and control the user terminal mobility within largeIP based Access Networks, as this brings benefit to the user as well as to the operator.     

Microstructured air-silica fibres: Recent developments in modelling, manufacturing and experiment

The main modelling methods devoted to microstructured air-silica optical fibres (MOFS) are presented and discussed. Then, the specific propagation properties ofMOFS are studied in detail. Characteristics measured on fibres manufactured in our laboratory or reported in the literature are analysed. A large number of potential and demonstrated applications are presented and the obtained performances are discussed. A particular attention is given to hollow-core photonic bandgap fibres and their applications.     

Numerical simulation of heat and mass transfer during the absorption of hydrogen in a magnesium hydride

This paper presents a numerical work aiming at the prediction of the characteristics of an industrial tank filled with hydrides for hydrogen storage. A validation of the method is given and is followed by the resolution of an example which shows the importance of achieving a three-dimensional modelling for the design of an industrial tank. Finally, recent results obtained on a magnesium hydride laboratory tank are given.     

Application of the percolation model to gelation of an epoxy resin

The percolation model has been applied to the study of gelation of the TGDDM-DDS system (tetraglycidyldiaminodiphenylmethane–diaminodiphenylsulfone) at a mass concentration of 100–30. For each temperature the experimental viscosity curves are satisfactorily described by a percolation law. Using the degree of chemical reactions, X, as a variable, a very clear change in the reaction mechanism with temperature can be shown. Then a rate of advancement of effective reactions, Y, is defined. This value only takes intermolecular-type reactions into account, and is probably the only variable on which viscosity depends in a percolation law: η = B(1 ? Y/Y_c)^?p. We obtain Y_c= 0.45 and p= 2.0. Comparing X_c and Y_c at the gel point, we obtain information on the proportion of intramolecular reactions with temperature. It is also demonstrated that the critical percolation threshold agrees closely with the gel point determined experimentally on log G″= f(t) curves.     

Affaiblissements calculés pour des liaisons Terre-satellite en France

The authors apply a method previously described in the litterature to three consecutive decades, for which the rain intensity at Paris was carefully measured. Computations for 12, 18 and 30 GHz show that the variability of rain attenuation among various decades is quite substantial, does not obey any long term trend, and does not depend upon the frequency. Hence, it is possible to propose an evaluation of prediction uncertainties due to random fluctuations of the rain climate in the long term. Next, specific predictions are carried out for various regions in France, and the possible advantages of high altitude receiving site are estimated. They stress the variability of attenuation with location for 12 and 18 GHz : for a given attenuation margin, outage durations vary by a factor one to ten between various French regions.     

Hydrogenation of but-1-yne on platinum catalyst: Role of reversible adsorbed hydrocarbon deposit

By using rectangular pulses of but-1-yne carried by H₂ or H₂-He mixtures over a platinum catalyst, it was possible to visualize the build-up of an adsorbed hydrocarbon deposit which is a necessary condition for getting a selective catalyst (on platinum, but-1-ene selectivity is 90%). Such a deposit is reversibly adsorbed since it desorbs as hydrogenated butyne molecules when the butyne pressure drops at the end of the pulse. Moreover it was shown, during stationary phase, that the sudden fall in the selectivity at high but-1-yne conversion, is due to the desorption of such reversibly adsorbed molecules.