Thrombolytic therapy for unstable angina

Thrombolytic therapy for unstable angina has not gained acceptance as a primary treatment for unstable angina (UA) despite the evidence showing a reduction in mortality when these agents are given for myocardial infarction. The purpose of this review is to examine the clinical value of thrombolytic therapy for UA. The multiple lines of evidence supporting intracoronary thrombus formation as a key mechanism in the pathogenesis of UA are reviewed. Studies examining the effect of thrombolytic therapy on angiographic endpoints have shown little effect on the extent of luminal narrowing, but do reveal a decrease in angiographically detected thrombus. Twelve randomized, controlled trials of thrombolytic agents in 611 UA patients with predefined clinical endpoints have been published. These trials varied widely in design and adjunctive therapy both in treated and control grops. Review of these trials show a tendency to fewer clinical events such as death, infarction, and need for revascularization in treated patients, with a corresponding increase in bleeding complications. Clinical efficacy of thrombolytic therapy cannot be excluded by the available data, perhaps in part because of insufficient numbers of patients treated. Determination of the net clinical value of thrombolytic therapy must await larger and more definitive trials.     

Analysis of interfacial failure in a composite microbundle pull-out experiment

Modeling of the failure of polymer-matrix composites requires substantial information about the mechanisms of failure at the interface, and load redistribution around fiber breaks in the composite. Current interface experiments involving the use of ‘microcomposites’ of single embedded fibers in a matrix generally do not include all the key geometric features of the real composite; in particular, they do not include the effects of fiber volume fraction and the higher matrix shear resulting from closely neighboring fibers. A new experiment was recently devised to assess some of these effects: it is referred to as the single-fiber pull-out from microbundle (SFPOM) experiment. It consists of a hexagonal arrat of seven fibers in a matrix where the outer six fibers are restrained and the center fiber is pulled out. Recent experimental data from tests with this geometry are analyzed here using three mechanical models of the failure process, and parametric studies of the data are performed to assess the appropriateness of each model. Two of the models, based on fracture energy considerations as applied earlier to single embedded fibers in a matrix and adapted to our geometry, were found to model data from the SFPOM experiments poorly. The third model assumes the existence of three zones near a fiber break, including elastic, plastic and frictional debond zones, and was found to provide reasonable fit to the data under realistic assumptions.     

Overview of recent operating experience regarding plant aging

Recent, as well as past, studies of reactor trip frequencies and other types of operating experience have shown that relatively high frequencies are likely in new plants with little accumulated operating time. In order to better understand all the factors which contribute to high frequencies in new plants, the authors have made a comparison of reactor trip frequencies between plants which went into operation in the 1960's and the early 1970's and those which have gone into operation more recently. Trip frequency versus accumulated operating time for two plant groups are compared to see the extent to which design differences (e.g., capacity, thermal margin) affect trip frequency.This paper also presents a review of some recent events in which plant age has played a major role. The events which are reviewed have been identified through the normal systematic event analysis program conducted by the NRC. Information regarding these events was obtained through followup by reviews conducted by NRC Resident Inspectors as well as event reports submitted by licensees.     

Development of an octocalcium phosphate cement

From previous studies it is known that alpha-tertiary calcium phosphate and dicalcium phosphate form a cement upon mixing with water. In this study this cement was optimized in terms of the milling of the constituents, their molar ratio, the amount of hydroxyapatite added and the water/powder ratio. The optimum Ca/P molar ratio of the cement mixture was 1.36±0.03. X-ray diffraction showed the reaction product to be octocalcium phosphate. Addition of precipitated hydroxypatite of over 3% diminished the final strength of the cement significantly. However, admixtures of only 2% of precipitated hydroxyapatite (a) kept the final compressive strength at 30±5 MPa after soaking in Ringers solution at 37°C, (b) diminished the initial setting time from 27.5 to 10 min and the final setting time from 65 to 40 min, (c) diminished the time in which the final strength was reached from 36 to less than 14 h. The tensile strength of this cement is 19±1% of its compressive strength. The optimum water/powder ratio as found in this study was 0.30 g/g.     

Comparison of two current modulation strategies for matrixconverters under unbalanced input voltage conditions

In this paper, the input current performance of matrix converters is analyzed, especially with reference to the operating conditions determined by unbalanced supply voltages. The space-vector modulation (SVM) technique is utilized to calculate the duty cycles of the active voltage vectors that must be applied, in each switching cycle period, in order to satisfy the input and output requirements. A detailed theoretical analysis of the input current harmonic content under unbalanced input voltage conditions is presented for two different current modulation strategies. On the basis of numerical simulations as well as measurements on a laboratory prototype setup, the strategies' performance are compared and the validity of the theoretical investigation confirmed. It is concluded that, when the input voltages are unbalanced to a significant extent, a dynamic input current modulation strategy has to be preferred, since a lower harmonic line current distortion will appear     

The multiple interaction model for nonshallow scatterers buriedbeneath 2-d random rough surfaces

The multiple interaction model is hybridized with the robust Steepest Descent Fast Multipole Method (SDFMM) to compute the signature of nonshallow penetrable scatterers buried beneath two-dimensional random rough surfaces. The most attractive feature of the multiple interaction model with using the SDFMM is removing the quasi-planar structure constraint for analyzing nonquasi-planar scatterers. The results show that the buried object's signature is largely due to the first interaction mechanism; however, the contribution of each additional interaction is explicitly calculated, though they may become insignificant especially for lossy background soil     

Ka-band solid-state pulsed Gunn oscillator and power combiner

GaAs Gunn diodes were fabricated for pulse source application at 8 mm wave band and operated with pulsewidths of 0.05 to 2.0 microseconds and duty cycles of 0.001 to 0.01. Peak pulse output power levels of 0.8–1.2W are achieved and the maximum available power is 1.6W with the highest efficiency of 6.5 percent. A simple and compact pulsed power combiner is also given in this paper.