A greedy algorithm to determine the number of transporters in a cyclic electroplating process

This paper presents a local optimization algorithm for minimizing the number of transporters required for material handling in a cyclic processing line. Within a cycle, a given set of transportation operations must be performed. Each operation consists of picking up a work-in-process job at a stage and delivering it to the next stage. The length of time that a job can remain at a particular stage is restricted by a time window. The transporters that perform the operations move on a shared track, and traffic collisions must be avoided during their movements. To avoid traffic collisions, the operations are partitioned into groups, where each group is served by a single transporter. A local optimal solution is obtained when the group sizes are maximized. We show that the duals of the linear programming subproblems formulated in the process of maximizing the group sizes are specially structured shortest-path problems. This leads to an effective search method for the maximization problem. Conditions when die proposed algorithm achieves die global optimal solution are discussed. The algorithm's performance is evaluated on both randomly generated test problems and benchmark problems.     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

电子型／离子型导电高分子共混物

用苯胺在酸性水溶液中的进行化学氧化聚合合成了能溶于Ｎ－甲基吡咯烷酮的高分子量聚苯胺（ＰＡｎ），并用这种ＰＡｎ与一种高分子固态离子导体－－聚乙二醇聚醚氨酯脲（ＰＥＵＵ）和ＬｉＣｌＯ４的复合物（ＰＥＵＵ－ＬｉＣｌＯ４）进行溶液共混制得了具有电子型／离子型两种导电功能的新型高分子共混物。用差示扫描量热法、动态粘弹仪、应力－应变试验、四探针法和交流阻抗谱对这种高分子共混物进行研究。实验结果表明，上述ＰＡｎ     

化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

Interface microstructure and reaction in Gr/Al metal matrix composites

The interface structure in Gr/Al composites fabricated with liquid metal infiltration has been studied using transmission electron microscopy (TEM). Morphologies of interfacial reaction product, aluminium carbide Al₄C₃, formed at different manufacturing parameters were compared and, the growth mechanism of the carbide was studied by means of high resolution electron microscopy (HREM). It has been shown that the morphology of the carbide is intimately related to the processing parameters with which the composites were produced. There are two kinds of interfaces between the carbide and the aluminium matrix. They have different growth mechanisms and relative growth rates under different growth driving forces. Several crystal orientation relationships between the carbide and the aluminium matrix have been observed.     

Microbial degradation of di-n butyl phthalate

Microorganisms capable of degrading di-n-butyl phthalate (DBP) were isolated. The characteristics of DBP biodegradation by immobilized and free cells were investigated. The experimental results showed that the rate of DBP degradation of immobilized cells was higher than that of free cells.     

Electrochemical Investigation on the Formation of Dy-Fe Alloy in Molten Chlorides

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＩｎｖｅｓｔｉｇａｔｉｏｎｏｎｔｈｅＦｏｒｍａｔｉｏｎｏｆＤｙＦｅＡｌｏｙｉｎＭｏｌｔｅｎＣｈｌｏｒｉｄｅｓＬｉｕＧｕａｎｋｕｎ（刘冠昆），ＴｏｎｇＹｅｘｉａｎｇ（童叶翔），ＨｏｎｇＨｕｉｃｈａｎ（洪惠婵），Ｙａｎｇ...     

Synthesis and Crystal Structure of RE[CH_2(CH_2)_4CONC_4H_9]_3(NO_3)_3(RE=Dy,La)

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＲＥ［ＣＨ２（ＣＨ２）４ＣＯＮＣ４Ｈ９］３（ＮＯ３）３（ＲＥ＝Ｄｙ，Ｌａ）ＷａｎｇＨａｎｚｈａｎｇ（王汉章），ＸｕＱｉｎｇｆｅｎｇ（徐庆锋），ＱｉａｎＰｕ（钱朴）ＳｕｎＪｉａｎｐｉｎｇ（孙建...     

液体火箭发动机研制情况的一些回顾

４０年来，我国液体火箭发动机的研制工作取得了很大成绩。文中对发动机的一些研制情况作了回顾，对ＹＦ－７３和ＹＦ－７５氢氧发动机的设计特点、飞行结果作了简单叙述。对今后工作也提出了看法。     

电流模精密整流电路

由电压型运算放大器组成的精密整流电路要严格地匹配电阻才能获得精密全波整流波形．本文给出一种具有CCⅡ电路特性由运算放大器AD844所构成的电流模精密整流电路．无需匹配电阻就可输出良好的精密全波整流波形．且具有输入电压范围大，频带宽等特点．