公共娱乐场所消防安全现状及对策

从消防安全管理的角度,论述了公共娱乐场所消防安全存在的主要问题和如何进一步加强公共娱乐场所的消防安全工作     

Drying with Chemical Reaction in Cocoa Beans

Desirable flavor qualities of cocoa are dependent on how the cocoa beans are fermented, dried, and roasted. During fermentation and drying, polyphenols such as leucocyanidin and apecatechin are oxidized by polyphenols oxidase to form o-quinone, which later react nonenzymatically with a hydroquinone in a condensation reaction to form browning products and moisture. The objective of this article is to model the cocoa beans drying together with the browning reaction. A Luikov drying model for the moisture and a simple Fick's law diffusion model combined with first-order reactions for both the enzymatic oxidation and nonenzymatic condensation reactions were constructed. Both models were used to identify moisture diffusivity coefficient and total polyphenols diffusivity in cocoa beans from experimental drying and polyphenols degradation data and published kinetic data of the reactions. The theoretical drying model fitted the experimental cocoa bean drying curves with low mean square of residuals. The polyphenols diffusion and reaction model also fitted the experimental polyphenols degradation curves with minimum mean residual squares. The rate of polyphenols degradation in the cocoa beans increases at higher temperature and higher relative humidity. This is because the increasing reaction rate of polyphenols oxidation reaction as well as higher moisture diffusion at higher relative humidity and temperature. The effective moisture diffusivity in cocoa beans is estimated to be between 8.194 × 10^-9 and 8.542 × 10^-9 m²·s^-1, which is of the same order of magnitude as published data. The effective total polyphenols diffusivity is estimated to be between 8.333 × 10^-12 to 1.000 × 10^-11 m²·s^-1 with minimum mean residual squares. It is three orders of magnitude less than the estimated moisture diffusivity because of the larger polyphenols molecules. The estimated polyphenols diffusivity is very close to those published in the literature for sorption and ultrafiltration processes.     

Fracture mechanics of a shaft-loaded blister of thin flexible membrane on rigid substrate

A shaft-loaded blister test has been developed to measure the interfacial energy W of a thin flexible polymeric film adhered to a rigid substrate. A theoretical analysis is given of an axisymmetric debond (blister) in terms of an external applied load P, tensile stretching modulus E and thickness h of the adhering layer. The fracture mechanics model presented considers both elastic and elastoplastic deformations in the thin film. The intrinsic stable interface debonding process provides an attractive alternative to the conventional adhesion measurement techniques.     

A new look at software piracy: Soft lifting primes an inauthentic sense of self,prompting further unethical behavior

Soft lifting refers to the process whereby a legally licensed software program is installed or copied in violation of its licensing agreement. Previous research on this pervasive kind of unethical computer use has mainly focused on the determinants of this unethical act, which are rooted in personal, economic, technological, cultural, socio-political, or legal domains. However, little is known about the symbolic power that soft lifting has on the sense of self. Based on recent advances in behavioral priming, we hypothesized that soft lifting can influence the signals one sends to oneself; more specifically, soft lifting may prime individuals to experience an inauthentic sense of self, which, in turn, prompts further unethical behavior. In Study 1, we showed that participants, primed with the memory of a recent soft lifting experience, cheated more than participants recalling a recent experience of purchasing authentic software or than control participants. Moreover, feelings of inauthenticity mediated the priming effect of soft lifting on dishonest behavior. In Study 2, participants primed with soft lifting showed a greater willingness to purchase a wide range of counterfeit products over authentic products. Besides those antecedents or correlates of soft lifting already identified in the literature, educators should pay more attention to the negative impact of soft lifting on the self-images of users, which may go beyond computer-related behaviors. Priming may provide a new direction for HCI researchers to examine the impact of computer-use-related factors on users' perceptions, motivations, and behaviors.     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

粉煤灰填充尼龙6浇铸制品的研究

将粉煤灰用硅烷偶联剂处理后填充到尼龙6浇铸制品(MC尼龙)中,可以改善制品的吸水性、收缩率及热稳定性等,还可以降低成本。该项研究结果有很大的实用价值。     

Calendering of non-newtonian fluids

The calendering of non-Newtonian fluids by two rotating cylinders to produce thin films of fluids finds wide application in polymer sheet-making and food-drying industries. Theoretical work has previouly been devoted to the symmetrical case where the cylinders are of equal diameters rotating at the same speed. The present work proposes a new one-film theory of calendering of power law fluids for unequal radii and surface velocities of the calendering cylinders. The relationship between the dimensionless thickness of the calendered fluid, Δ_e^* and that of the incoming fluid, Δ_i^* is shown to be a function of the ratio of the surface velocities of the cylinders and the power law index. The result further shows that Δ_e^* tends to asymptote after the second decade of Δ_i^*     

Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

Photochemical degradation of glassy polyesters of low softening point

The photodegradation of polyesters prepared by the reaction of o-phthalic, adipic, and “dimer” acids with ethylene glycol has been studied. The polyesters softened at temperatures in the range of 25–50°C. Polymer films were irradiated in air by means of a medium pressure mercury lamp and the extent of formation of COOH groups determined by infrared spectroscopy. The films were also irradiated in vacuo and in air by means of a high-pressure mercury lamp, and the volatile products, consisting mainly of carbon monoxide and carbon dioxide, were determined by gas chromatography. The results are interpreted in terms of simultaneous Norrish type I and type II decompositions of the polyesters. The type I process accounts for the formation of carbon monoxide and carbon dioxide in the absence of air. The enhanced yield of carbon dioxide in irradiations performed in air is ascribed to the formation of hydroperoxide which undergoes further photolysis. The type II process accounts for the formation of COOH groups. The photodegradation of these glassy polyesters parallels that of crystalline poly(ethylene terephthalate) and is relatively unaffected by changes in composition of the aromatic polyester.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.