改性玻纤增强尼龙610,1010塑料

研究了采用(准)中粘度级尼龙做基体树脂,加入成核剂改善尼龙的结晶过程,提高结晶速率和初始熔融温度;添加光、热氧稳定剂,防止尼龙在成型加工和使用过程中产生降解与老化,提高塑料制品的质量和减少性能的分散性;采用合理的工艺条件,确保添加剂的均匀分散与减少玻纤的磨损,得到适于军工、航空和机电等领域需要的高性能的受力结构工程塑料。     

Retarded coarsening phenomenon of γ′ particles in Ni-based alloy

An anomalous coarsening behavior has been observed after aging an alloy Ni-14.5 at .%Al-5.9 at. % Mo at 1453 K. It was found that the initial cubic γ′ (ordered Ll₂ Ni₃Al phase) particles began to split into smaller ones after short aging (t < 3 min). After continued aging, the particles agglomerated into large groups of many particles, and the distribution of the particles became non-uniform. The kinetics of coarsening did not obey the typical linear dependence between the cube of the particle size and aging time. Instead, a retardation of the coarsening process was found. Convergent beam electron diffraction (CBED) was applied to measure the distribution of the lattice strains around particles. The result indicated that there was an inhomogeneous distribution of lattice strain in the matrix around the coherent particles.     

羰基铁类随机混合吸波材料等效电磁参数的计算

本文为计及多重散射偶极子间的相互作用，引入参量εｈ和μｈ，导得一组公式。它不仅能计算铁氧体类也能计算羰基铁类的随机混合吸波材料的等效电磁参数，均与实验结果吻合良好。     

珠海拱北口岸联检大楼空调设计

介绍了珠海拱北口岸联检楼空调系统的设计特点，提出了按建筑类型、功能进行空调系统分区的设计方法，强调应根据建筑物的具体情况设置设备用房，以保障空调系统正常有效地运行。     

热声热机系统振荡频率的理论计算与实验验证

以热声发动机为例采用网络模型计算了热声热机系统的振荡频率，得出振荡频率为复频率，其实部代表实际频率，虚部表示压力幅值的衰减程度。对热机系统在各种不同的情况下(包括不同大小的谐振腔、板叠间距、气体静压、系统长度)进行了数值计算，理论计算值与实验结果能很好的吻合。     

单线复用技术在水文巡测设备中的应用

为了解决水文巡测设备中数据传输的可靠性，电力载波通讯中的单频阻波器技术被应用到巡测设备上。此法简单易行，稳定可靠。     

油气沉积学原理及其在勘探开发中的应用

本文以油气藏形成条件中的生、储、盖、运、圈为纲讨论了油气勘探沉积学;以油气藏开发过程中与沉积、成岩的关系讨论了油气开发沉积学。在油气勘探沉积学中重点论述了陆相沉积与储层及圈闭的关系;在油气开发沉积学中重点论述了储层研究的基础—储层的沉积属性和成岩特征。强调储层沉积、成岩研究应成为储层评价最重要的内容。     

The stability robustness determination of state space models with real unstructured perturbations

This paper considers the robust stability of a linear time-invariant state space model subject to real parameter perturbations. The problem is to find the distance of a given stable matrix from the set of unstable matrices. A new method, based on the properties of the Kronecker sum and two other composite matrices, is developed to study this problem; this new method makes it possible to distinguish real perturbations from complex ones. Although a procedure to find the exact value of the distance is still not available, some explicit lower bounds on the distance are obtained. The bounds are applicable only for the case of real plant perturbations, and are easy to compute numerically; if the matrix is large in size, an iterative procedure is given to compute the bounds. Various examples including a 46th-order spacecraft system are given to illustrate the results obtained. The examples show that the new bounds obtained can have an arbitrary degree of improvement over previously reported ones. This work has been supported by the Natural Sciences and Engineering Research Council of Canada under Grant No. A4396.     

Network model approach for calculating oscillating frequency of thermoacoustic prime mover

The network model is given and used to calculate the oscillating frequency of thermoacoustic prime mover. Theoretically calculated frequency by the model is plural, whose real part denotes actual frequency of the system, and imaginary part means attenuation coefficient of acoustic pressure. Numerical calculation is made under different conditions including different acoustic cavities, spacing between each parallel plate, gas pressures and system lengths. Theoretically calculated frequency and experimentally measured frequency are in quite good agreement.