Preparation and Evaluation of a Self-Nanoemulsifying Drug Delivery System Loaded with Heparin Phospholipid Complex

A self-nanoemulsifying drug delivery system (SNEDDS) was developed to enhance the absorption of heparin after oral administration, in which heparin was compounded with phospholipids to achieve better fat solubility in the form of heparin-phospholipid (HEP-Pc) complex. HEP-Pc complex was prepared using the solvent evaporation method, which increased the solubility of heparin in n-octanol. The successful preparation of HEP-Pc complex was confirmed by differential scanning calorimetry (DSC), Fourier-transform infrared (FT-IR) spectroscopy, NMR, and SEM. A heparin lipid microemulsion (HEP-LM) was prepared by high-pressure homogenization and characterized. HEP-LM can enhance the absorption of heparin after oral administration, significantly prolong activated partial thromboplastin time (APTT) and thrombin time (TT) in mice, and reduce fibrinogen (FIB) content. All these outcomes indicate that HEP-LM has great potential as an oral heparin formulation.     

露天开采矿山植被恢复策略与方法

矿产资源的勘探和开采为人类文明的现代化发展提供了物质基础。我国国土面积辽阔,矿产资源丰富。作为工业生产和日常生活的必需品,人类社会对各种矿产资源高度依赖。在过去相当长的一段时间内,我国矿产资源的开采以浅表矿山露天开采为主。这种开采方法技术含量低,受地质因素影响较小,然而却造成了严重的生态破坏和水土流失。不同于地下开采,露天矿山开采对地表形态的破坏性极大,所造成的植被破坏和生物多样性减少等问题更加突出。该文结合当前环境保护和治理要求,结合矿山植被破坏特点,探索露天矿山植被恢复的可行性策略。     

Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg-10Gd-3.5Er-xZn-0.5Zr Alloys

In this work, the effects of Zn content (0-2 wt%) on microstructural evolution and mechanical properties of cast Mg-10Gd-3.5Er-0.5Zr alloys are studied. The results show that the as-cast Mg-10Gd-3.5Er-xZn-0.5Zr alloys are mainly composed of Mg matrix and secondary (Mg, Zn)₃(Gd, Er) phases distributed along grain boundaries. With the increase in Zn content, the volume fraction of secondary (Mg, Zn)₃(Gd, Er) phases increases and the grains get refined. In the process of solid solution treatment, Zn addition can lead to the formation of long-period stacking ordered (LPSO) structures and the volume fraction of LPSO structures increases with Zn content. In addition, the Zn addition can reduce the vacancy formation energy and accelerate the diffusion rate of RE elements in Mg matrix. Because of the comprehensive effect of secondary phases and the accelerated diffusion rate, the base alloy and 2Zn alloy have less grain growth after solid solution treatment than that of the 0.5Zn alloy and 1Zn alloy. The precipitation process is also accelerated by enhanced diffusion rate. At room temperature (RT), the strengthening effect of β^'+ β₁ precipitates is more effective than that of LPSO structures, so the peak-aged 0.5Zn alloy exhibits the most excellent mechanical performance at RT, with yield strength of 219 MPa, ultimate tensile strength 296 MPa and elongation of 6.4%. While LPSO structures have stronger strengthening effect at elevated temperature than that of β^'+ β₁ precipitates, so the 1Zn alloy and 2Zn alloy have more stable mechanical performance than that of the base alloy and 0.5Zn alloy with the increase in tensile temperature.     

ZrO2制备方法研究进展

以ZrO₂为活性组分或载体的催化剂,在酚类定向催化转化中具有较高的研究价值。总结了ZrO₂的各种制备方法,包括溶胶-凝胶法、共沉淀法、水热法、表面活性剂辅助法、静电纺丝法、热解法、多元醇还原法、反相微乳法和超临界合成法等。阐述了各种方法的反应原理,详细比较了不同制备方法的优劣,并具体分析了制备方法对催化剂结构及性能的影响。     

Pyrolysis of vulcanized styrene-butadiene rubber via ReaxFF molecular dynamics simulation

Styrene-butadiene rubber (SBR) is widely used in tires in the automotive segment and vulcanization using sulfur is a common process to enhance its mechanical properties. However, the addition of sulfur as the cross-linking agent usually results in impurities in pyrolysis products during rubber recycling, and thus the desulfurization during tire pyrolysis attracts much attention. In this work, the pyrolysis of vulcanized SBR is studied in detail with the help of ReaxFF molecular dynamics simulation. A series of crosslinked SBR models were built with different sulfur contents and densities. The following ReaxFF MD simulations were performed to show products distributions at different pyrolysis conditions. The simulation results show that sulfur products distribution is mainly controlled by sulfur contents and temperatures. The reaction mechanism is proposed based on the analysis of sulfur products conversion pathway, where most sulfur atoms are bonded with hydrocarbon radicals and the rest transfer to H₂S. High sulfur contents tend to the formation of elemental sulfur intermediate, and temperature increase facilitates the release of H₂S.     

Promoting the Li storage performances of Li2ZnTi3O8@Na2WO4 composite anode for Li-ion battery

In this work, a reasonable strategy for the construction of Li₂ZnTi₃O₈@Na₂WO₄ composite was employed to promote the Li storage performances of Li₂ZnTi₃O₈. The Li₂ZnTi₃O₈@Na₂WO₄ composites (5, 10, and 15 wt%) were then prepared by a solution dispersion method. The introduction of Na₂WO₄ does not change the structures of the samples and they show similar morphologies with particle sizes from 100 to 200 nm. Suitable amount of Na₂WO₄ modification effectively improves the electrochemical performance of Li₂ZnTi₃O₈. Li₂ZnTi₃O₈@Na₂WO₄ composites (0, 5, 10, and 15 wt%) deliver the discharge/charge capacities of 137.4/136.4, 164.2/162.3, 189.2/188.1, and 154.5/153.3 mAh g^?1 at 0.5 A g^?1 after 100 cycles, respectively. Li₂ZnTi₃O₈@Na₂WO₄ composites (10 wt%) has the highest reversible capacities among all samples. The Na₂WO₄ shell with an excellent electronic conductivity can reduce electrode polarization, decrease the charge transfer resistance, enhance the Li-ion diffusion coefficient of Li₂ZnTi₃O₈, and then improve the electrochemical kinetics of composites. In addition, the formation of Ti–O bonds at the interface can be helpful for the stabilization of the composite, being beneficial for the improvement of their cycling stabilities. These results reveal that Na₂WO₄ coating is a facile and effective strategy to promote the Li storage performance of Li₂ZnTi₃O₈.     

气相色谱法检测消毒产品中的正丙醇与乙醇

使用HP-Plot Q色谱柱与FID检测器检测消毒剂中复配的正丙醇与乙醇含量,最大方法相对偏差(RSD)为2.14％,最小方法回收率为100.0％,乙醇与正丙醇的检出浓度为0.025％,是一种快速准确的一针检测法.     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.     

Effect of nitriding atmosphere on the morphology of AlN nanofibers from solution blow spinning

High purity AlN fiber is a promising thermal conductive material. In this work, AlN fibers were prepared using solution blow spinning followed by nitridation under N₂ or NH₃ atmosphere. Soluble polymer, such as polyaluminoxane, and allyl-functional novolac resin were adopted as raw materials to form homogeneous distribution of Al₂O₃ and C nanoparticles within the fibers, which could inhibit the growth of alumina crystal and promote their nitridation process. The effect of nitriding atmosphere on the fiber morphology was investigated. XRD results showed that complete nitridation was achieved at 1300 °C in the NH₃ or at 1500 °C in the N₂ atmosphere. Hollowed fiber structure was observed when fiber was nitrided in N₂ at high temperature, which was caused by gaseous Al gas diffusion, and this phenomenon was eliminated in NH₃ atmosphere. The nitridation mechanisms in different atmosphere were analyzed in detail. It was demonstrated that the nitridation of Al₂O₃ fibers in the NH₃ atmosphere offered the favored AlN morphology and chemical quality. Flexible AlN fiber with O content of 0.7 wt% was achieved after nitriding in NH₃ at 1400 °C. The high quality AlN can be used in thermal conductive composite materials.