基于计算机声卡的虚拟仪器的设计

主要介绍通过计算机的声卡来实现对虚拟仪器的设计，模拟了示波器、信号发生器和频率计等设备的基本功能，详细介绍了系统的硬件设计方法及软件流程。该系统主要适用于音频范围的各种信号的采集与产生。     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

Two-electrode DFB laser filter used as a wide tunable narrow-bandFM receiver: tuning analysis, characteristics and experimental FSK-WDMsystem

Characteristics of a two-electrode DFB laser filter are studied both theoretically and experimentally. Using a matrix analysis of spontaneous emission, a continuous tuning range of 6.7 Å is achieved by changing both net field gains of the two electrodes. A total discontinuous tuning range of over 10 nm comprising alternating mode jumps and continuous tuning range of 4 Å are measured experimentally. The laser filter presents a FWHM bandwidth of 5 GHz which depends on the optical input power. In addition, it is demonstrated that a DFB laser filter can act as a frequency discriminator/photodetector, i.e., a narrow-band FM receiver, with a uniform bandwidth of 1.5 GHz. Using the two-electrode DFB laser for both transmitter and receiver, a two-channel FSK-WDM transmission system utilizing the discontinuous tuning range is reported. The advantage of such a device is the simplicity as compared to the heterodyne technique     

Surgical treatment of aneurysms of the left ventricle. Immediate and long-term results. Apropos of a consecutive series of 121 cases

From 1978 to 1992, 121 cases of postinfarction left ventricular aneurysm (99 males, 22 females, mean age 60 years) were operated on. The authors insist on a high rate of clinical arhythmogenicity (31.4%) and associated mechanical complications (21%). 76% of patients were in functional NYHA class III or IV. Resection was performed in 90% of patients, plication in 10%. 58% underwent coronary artery bypass grafting (1.7 graft/patient), 16% encircling ventriculotomy, 8% mitral valve replacement and 13% closure of ventricular septal defect. Operative mortality was 14.9% (10% when other mechanical complications where excluded). 5-year survival is 67.9%. Late cardiac deaths are as follow: left ventricular failure (1.8% A/P), Sudden death (1.4% A/P), Myocardial infarction (0.6% A/P). 82% of survivals are in functional NYHA class I or II. Only functional class NYHA III or IV is predictive of late death. We conclude that postinfarction left ventricular aneurysm remains a high risk complication especially when associated with other mechanical complications. When arhythmogenicity is present we suggest rhythmologic surgery and in all cases, complete revascularization.     

X441对数放大器的原理及其应用

本文主要介绍X441单片对数放大器的基本原理和应用,并列举了一些具体应用电路。     

Expert system application for the loading capability assessment oftransmission lines

This paper describes the application of an expert system for the evaluation of the short-term thermal rating and temperature rise of overhead conductors. The expert system has been developed using a database and Leonardo expert system shell which is gaining popularity among commercial tools for developing expert system applications. The expert system has been found to compare well when evaluated against site tests. A practical application is given to demonstrate the usefulness of the expert system developed     

Part II: An example of the use of the comsis software: simulation of an optical network which uses wavelength multiplexing,fsk modulation format and direct detection

This second article deals with using the Comsis software for a particular application. Simulation is used to determine the maximum channel density in presence of crosstalk. In a first part, the modelling of the system is described. The simulation parameters of different optical elements are given. The results show that in the case of channels modulated at 500 Mbitls using fsk modulation format, and a direct detection operation at 1,5 μm, a minimum spacing of 6 GHz can be obtained with a 2 dB penalty. Thus if only the bandwidth of the erbium doped fibre amplifier is taken into account, the maximum number of channels which can be used is 250. However if the fsr (free spectral range) of optical filter is taken into account, the maximun number of channels is limited to 30.