Scenario analysis and management options for sustainable river basin management: Application of the Elbe DSS

We developed a decision support system (DSS) for sustainable river basin management in the German Elbe catchment (～100,000 km²), called Elbe-DSS. The system integrates georeferenced simulation models and related data sets with a user friendly interface and includes a library function. Design and content of the DSS have been developed in close cooperation with end users and stakeholders. The user can evaluate effectiveness of management actions like reforestation, improvement of treatment plant technology or the application of buffer strips under the influence of external constraints on climate, demographic and agro-economic changes to meet water management objectives such as water quality standards and discharge control. The paper (i) describes the conceptual design of the Elbe-DSS, (ii) demonstrates the applicability of the integrated catchment model by running three different management options for phosphate discharge reduction (reforestation, erosion control and ecological-farming) under the assumption of regional climate change based on IPCC scenarios, (iii) evaluates the effectiveness of the management options, and (iv) provides some lessons for the DSS-development in similar settings. The georeferenced approach allows the identification of local inputs in sub-catchments and their impact on the overall water quality, which helps the user to prioritize his management actions in terms of spatial distribution and effectiveness.     

Precise selective deposition of microparticles on electrodes of microelectronic chips

We examined the high precision deposition of toner and polymer microparticles with a typical size of approximately 10 microm on electrode arrays with electrodes of 100 microm and below using custom-made microelectronic chips. Selective desorption of redundant particles was employed to obtain a given particle pattern from preadsorbed particle layers. Microparticle desorption was regulated by dielectrophoretic attracting forces generated by individual pixel electrodes, tangential detaching forces of an air flow, and adhesion forces on the microchip surface. A theoretical consideration of the acting forces showed that without pixel voltage, the tangential force applied for particle detachment exceeded the particle adhesion force. When the pixel voltage was switched on, however, the sum of attracting forces was larger than the tangential detaching force, which was crucial for desorption efficiency. In our experiments, appropriately large dielectrophoretic forces were achieved by applying high voltages of up to 100 V on the pixel electrodes. In addition, electrode geometries on the chip's surface as well as particle size influenced the desorption quality. We further demonstrated the compatibility of this procedure to complementary metal oxide semiconductor chip technology, which should allow for an easy technical implementation with respect to high-resolution microparticle deposition.     

Hand and foot purpura ("glove and sock" syndrome) caused by parvovirus B19 infection

After a period of general nonspecific symptoms (weakness; nocturnal sweating) for a few days a 29-year-old man suddenly developed a purpura-like rash on both hands and feet ("glove and sock") with mild itching and oedema. A blood count demonstrated leukopenia (2100/microliters) with neutropenia (1100/microliters), thrombocytopenia (81,000/microliters) and reticulocytopenia (1/1000), while haemoglobin content was normal. The bone-marrow showed almost complete reduction of erythropoiesis with the presence of giant proerythroblasts. Granulopoiesis and megakaryopoiesis were unremarkable. Positive tests for IgM and IgG antibodies against parvovirus B19 established the diagnosis of infection with this organism. The rash, blood picture and bone-marrow changes all regressed spontaneously, without any treatment, within a week. The petechial or purpuric "glove and sock" syndrome may be a special form of parvovirus B19 infection.     

Absorption of di-linoleoylphosphatidylcholine after oral administration

Essentiale and Lipostabil contain "essential" phospholipids from the soybean, mainly 1,2-dilinoleoyl-phosphatidylcholine (CAS 998-06-1, DLPC) which is considered as the main active ingredient. A single oral dose of d15-DLPC loaded with deuterium 9 times in the choline and 6 times in the linoleic acid of the 1-position was given to volunteers. Sera from 11 blood samples taken within 48 h after application were examined by means of mass spectrometry with regard to d9-choline and d6-linoleic acid in the 1- and 2-position of serum phosphatidylcholines (PC) as well as in the serum triglycerides. d9-choline, i.e. the total of d15-PC and d9-PC, showed maximum values of 5.6% of the total serum PC concentration. Normally, about 1.3% of PC in the human serum is DLPC. Serum 1-linoleoyl-PC was increased by 32-40% after oral application of d15-DLPC. A minor uptake of d6-linoleic acid into the 2-position of serum PC, which is rich in linoleic acid, and into the serum triglycerides was observed with peak values of 2.3% and 6.1%, resp. The uptake of polyunsaturated PC species like DLPC and 1-linoleoyl-PC into the liver after oral application of drugs containing such species in high amounts like "essential" phospholipids with about 50% of DLPC let expect therapeutic effects on membranes into which this special species is incorporated.     

Multifunctional Gadolinium‐Doped Mesoporous TiO2 Nanobeads: Photoluminescence,Enhanced Spin Relaxation,and Reactive Oxygen Species Photogeneration,Beneficial for Cancer Diagnosis and Treatment

Materials with controllable multifunctional abilities for optical imaging (OI) and magnetic resonant imaging (MRI) that also can be used in photodynamic therapy are very interesting for future applications. Mesoporous TiO₂ sub‐micrometer particles are doped with gadolinium to improve photoluminescence functionality and spin relaxation for MRI, with the added benefit of enhanced generation of reactive oxygen species (ROS). The Gd‐doped TiO₂ exhibits red emission at 637 nm that is beneficial for OI and significantly improves MRI relaxation times, with a beneficial decrease in spin–lattice and spin–spin relaxation times. Density functional theory calculations show that Gd³⁺ ions introduce impurity energy levels inside the bandgap of anatase TiO₂, and also create dipoles that are beneficial for charge separation and decreased electron–hole recombination in the doped lattice. The Gd‐doped TiO₂ nanobeads (NBs) show enhanced ability for ROS monitored via ^?OH radical photogeneration, in comparison with undoped TiO₂ nanobeads and TiO₂ P25, for Gd‐doping up to 10%. Cellular internalization and biocompatibility of TiO₂@x Gd NBs are tested in vitro on MG‐63 human osteosarcoma cells, showing full biocompatibility. After photoactivation of the particles, anticancer trace by means of ROS photogeneration is observed just after 3 min irradiation.     

An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis

Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.     

From monolithic to component-based performance evaluation of software architectures

Model-based performance evaluation methods for software architectures can help architects to assess design alternatives and save costs for late life-cycle performance fixes. A recent trend is component-based performance modelling, which aims at creating reusable performance models; a number of such methods have been proposed during the last decade. Their accuracy and the needed effort for modelling are heavily influenced by human factors, which are so far hardly understood empirically. Do component-based methods allow to make performance predictions with a comparable accuracy while saving effort in a reuse scenario? We examined three monolithic methods (SPE, umlPSI, Capacity Planning (CP)) and one component-based performance evaluation method (PCM) with regard to their accuracy and effort from the viewpoint of method users. We conducted a series of three experiments (with different levels of control) involving 47 computer science students. In the first experiment, we compared the applicability of the monolithic methods in order to choose one of them for comparison. In the second experiment, we compared the accuracy and effort of this monolithic and the component-based method for the model creation case. In the third, we studied the effort reduction from reusing component-based models. Data were collected based on the resulting artefacts, questionnaires and screen recording. They were analysed using hypothesis testing, linear models, and analysis of variance. For the monolithic methods, we found that using SPE and CP resulted in accurate predictions, while umlPSI produced over-estimates. Comparing the component-based method PCM with SPE, we found that creating reusable models using PCM takes more (but not drastically more) time than using SPE and that participants can create accurate models with both techniques. Finally, we found that reusing PCM models can save time, because effort to reuse can be explained by a model that is independent of the inner complexity of a component. The tasks performed in our experiments reflect only a subset of the actual activities when applying model-based performance evaluation methods in a software development process. Our results indicate that sufficient prediction accuracy can be achieved with both monolithic and component-based methods, and that the higher effort for component-based performance modelling will indeed pay off when the component models incorporate and hide a sufficient amount of complexity.     

The challenge of conceptual modeling for product–service systems: status-quo and perspectives for reference models and modeling languages

Confronted with decreasing margins and a rising customer demand for integrated solutions, manufacturing companies integrate complementary services into their portfolio. Offering value bundles (consisting of services and physical goods) takes place in integrated product–service systems, spanning the coordinated design and delivery of services and physical goods for customers. Conceptual Modeling is an established approach to support and guide such efforts. Using a framework for the design and delivery of value bundles as an analytical lens, this study evaluates the current support of reference models and modeling languages for setting up conceptual models for an integrated design and delivery of value bundles. Consecutively, designing modeling languages and reference models to fit the requirements of conceptual models in product–service systems are presented as upcoming challenges in Service Research. To guide further research, first steps are proposed by exemplarily integrating reference models and modeling languages stemming from the service and manufacturing domains.