Production of biodegradable rods of polycaprolactone/olanzapine for potential application in treatment of Schizophrenia

Olanzapine (OLZ) is a commonly antipsychotic used to treat schizophrenia, a mental illness, with fewer side effects when compared with other drugs of the same class. It is commercialized mainly as oral tablets and orally disintegrating tablets. However, this drug oral bioavailability is affected by the first pass effect and low solubility in water. This requires high daily doses that can cause more side effects and poor treatment compliance. Also, the frequency of frequency of tablet intake is commonly related to patients' abandonment of schizophrenia treatment. So, the development of implantable biomaterials for OLZ delivery can be an alternative to solve both problems, since this material can, potentially, be used subcutaneously in less frequent administrations, thus the treatment has a greater chance of success. Therefore, the objective of this work was to produce polycaprolactone (PCL) rods incorporated with OLZ by hot-melt extrusion technique. The rods were characterized by different techniques, which showed an amount of 6.78 ± 0.56 mg of OLZ per rod. The in vitro release studies were performed and they showed a controlled release of the drug that followed the Higuchi's model. These results indicated that the PCL/OLZ rods have potential application in the schizophrenia treatment.     

Effect of the addition mechanism of ZnO sintering aid on densification,microstructure and electrical properties of Ba(Zr,Y)O3-δ proton-conducting perovskite

We explore three different potential mechanisms to introduce 4 mol% ZnO sintering additive to the promising yttrium-doped barium zirconate (Ba(Zr,Y)O_3-δ, BZY) proton conductor. The mechanisms involve Zn substitution for Y, Zr, or B-site cation excess. The addition of ZnO promotes high densification levels (up to 98% of the theoretical value) at 1300 °C, irrespective of the mechanism. However, scanning electron microscopy shows that the B-site cation excess mechanism leads to an impaired grain growth compared to the other mechanisms. Rietveld refinement of the lattice-parameters and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy indicates that Zn resides in both grains and grain boundaries in all cases. Determination of partial conductivities demonstrates that the Zr substitution mechanism provides slightly higher values of bulk protonic conductivity, as well as a higher hydration enthalpy. In contrast, the B-site excess mechanism provides the highest specific grain-boundary conductivity, as a result of greater Zn segregation to the grain boundary.     

Breaking MPC implementations through compression

International Journal of Information Security - There are many cryptographic protocols in the literature that are scientifically and mathematically sound. By extension, cryptography today seeks to...     

Improving quality of fresh‐cut mango using polysaccharide‐based edible coatings

This study was aimed at evaluating the effect of coatings with alginate (AL), pectin (PE), carboxymethyl cellulose (CMC) or chitosan (CH) on microbial stability, physicochemical attributes, total phenolics and carotenoids content, antioxidant capacity and sensory properties of fresh‐cut mango during 14 days at 4 ± 1 °C. Coated fresh‐cut mango kept microbial counts below 6 logs CFU g^?1, being CH‐coated fresh‐cut mango those that exhibited the lowest microbial counts (1 log CFU g^?1) along entire storage. AL, PE and CMC coatings maintained yellow colour of fresh‐cut mango throughout storage. AL and CH coatings, which have different monomers in their chain, improved the content of antioxidant compounds in fresh‐cut mango as related to uncoated. AL‐coated fresh‐cut mangoes were the toughest, among those coated, during 14 days. The highest consumer acceptance was achieved in AL (90.2%) coated fresh‐cut mango. CH would be the most suitable coating to extend the quality of fresh‐cut mango throughout storage.     

An analytical and numerical framework for evaluating axial compression of finite dimensional metallic foams by generalization of buckling effects

In this work, the overall behavior of finite dimensional metallic foam specimens under axial compression is derived from a mixed analytical and numerical framework based on the buckling pattern that the walls of the foam exhibit in this situation. Instead of a full simulation of the entire foam, the present approach requires the simulation of three compression cases of representative volume elements and works on a finite dimensional context instead of the infinite periodic boundary consideration. Results obtained with the present framework are compared with those obtained using full finite element simulation, exhibiting excellent agreement even at very large strains.     

Flocculation by cationic polyelectrolytes: Relating efficiency with polyelectrolyte characteristics

A series of acrylamide/dimethylaminoethylacrylate methyl chloride copolymers (AM‐co‐DMAEA) was evaluated as flocculants for model Precipitated Calcium Carbonate (PCC) in distilled water. These cationic polyelectrolytes (PEL) differed by their AM/DMAEA ratio, i.e., their charge density, chain architecture (linear and branched), their intrinsic viscosity (IV), and zeta potential of their aqueous solutions. The IV being directly related to the hydrodynamic volume of the PEL and the zeta potential reflecting the effective charges in suspension were selected for practically useful correlations with flocculation performance. The fractal dimension (d_F) and the scattering exponent (SE) of the flocs, analyzed by the laser diffraction method, were taken as indication of primary particle and aggregate assembly. For the optimum PEL dosage, SE and d_F varied with the IV and zeta potential. It was observable that floc size, floc resistance, and floc reorganization correlate with the PEL characteristics. Copolymers with lower IV, which is here associated with PEL of similar molar mass but lower charge density, yielded larger and less resistant flocs. Copolymers with higher IV originated smaller more compact flocs being more resistant. In high shear situations, where floc breakage should be avoided, as it is the case in papermaking, polymers with high IV yielding large SE are advantageous. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Investigation on the use of coir fiber as alternative reinforcement in polypropylene

Polypropylene/coir fiber composites were prepared according to an experimental statistical design, in which the independent variables, coir fiber, and compatibilizer content, were varied. The compatibilizer used was maleic anhydride grafted polypropylene (PP‐g‐MA). Compatibilizer free composites were also prepared. Composites were processed in a corotating twin‐screw extruder and submitted to mechanical and morphological analyses. The effects of the independent variables on the mechanical properties were assessed through tensile strength, elongation at break, flexural modulus, and impact strength. The morphological properties were assessed by scanning electron microscopy (SEM). The results indicated the need for using compatibilizers in the composites due to the incompatibility of PP and coir fiber. The variable with the strongest effect on the properties was coir content, whose increase caused increase in tensile strength, impact strength and elastic modulus, and decrease in elongation at break. The presence of PP‐g‐MA was fundamental to achieving the aforementioned results. The effect of increasing compatibilizer content was only observed for the elastic modulus. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Modelling PCC flocculation by bridging mechanism using population balances: Effect of polymer characteristics on flocculation

A population balance model for flocculation of PCC particles with polyelectrolytes of very high molecular weight, medium charge density and different degree of branching is presented. The model considers simultaneously aggregation, breakage and flocs restructuring to describe the PCC flocculation by bridging mechanism. The maximum collision efficiency factor, a parameter related with the fragmentation rate and a time constant for flocs restructuring have been taken as fitting parameters. These fitting parameters are optimized to get the best fit between experimental data obtained by LDS in a previous study and the modelled results. The optimized parameters were correlated with flocculant concentration, flocs structure and polymer branching. The correlations obtained show well the effects of flocculant concentration, flocs structure and polymer structure on the flocculation kinetics and flocs restructuring which are translated in the model parameters. Moreover, the flocs break up due to polymer degradation was introduced in the model by decreasing, with time, the maximum collision efficiency factor. It was shown that this effect can be neglected since the improvement in the results is too small relatively to the high increase of the computational time required to perform the simulation.