Rapid evaluation of olive oil quality by NIR reflectance spectroscopy

NIR spectroscopy calibrations have been developed for a range of quality parameters in olive oil, including FFA, PV, polyphenol content, induction time, chlorophyll, and the major FA. A set of 216 olive oil samples from throughout the Australian olive-growing areas were used to provide a representative range of quality. The variation in the oils tested virtually covered the range of the chemical standard limits described by the International Olive Oil Council. A FOSS NIRSystems^® 6500 spectrophotometer with a liquid cell holder was used. Multiple correlation coefficients squared (R ²) for minor components stearic acid (0.86), and linolenic acid (0.85) were relatively low because the concentration range is very narrow compared with the reproducibility of the reference method. However, the major FA, oleic (0.99) and linoleic (1.00), FFA (0.97), and chlorophyll (0.98) provided high levels of accuracy. All of the parameters measured were sufficiently accurate for routine screening of olive oil.     

Generating hydrogen-rich fuel-cell feeds from dimethyl ether (DME) using physical mixtures of a commercial Cu/Zn/Al2O3 catalyst and several solid–acid catalysts

Homogeneous physical mixtures containing a commercial Cu/ZnO/Al₂O₃ catalyst and a solid–acid catalyst were used to examine the acidity effects on dimethyl ether hydrolysis and their subsequent effects on dimethyl ether steam reforming (DME-SR). The acid catalysts used were zeolites Y [Si/Al = 2.5 and 15: denoted Y(Si/Al)], ZSM-5 [Si/Al = 15, 25, 40, and 140: denoted Z(Si/Al)] and other conventional catalyst supports (ZrO₂, and γ-Al₂O₃). The homogeneous physical mixtures contained equal amounts, by volume, of the solid–acid catalyst and the commercial Cu/ZnO/Al₂O₃ catalyst (BASF K3-110, denoted as K3). The steam reforming of dimethyl ether was carried out in an isothermal packed-bed reactor at ambient pressure.

The most promising physical mixtures for the low-temperature production of hydrogen from DME contained ZSM-5 as the solid–acid catalyst, with hydrogen yields exceeding 90% (T = 275 °C, S/C = 1.5, τ = 1.0 s and P = 0.78 atm) and hydrogen selectivities exceeding 94%, comparable to those observed for methanol steam reforming (MeOH-SR) over BASF K3-110, with values equaling 95% and 99%, respectively (T = 225 °C, S/C = 1.0, τ = 1.0 s and P = 0.78 atm). Large production rates of hydrogen were directly related to the type of acid catalyst used. The hydrogen production activity trend as a function of physical mixture was

     

Scrolls and nested tubes in multiwall carbon nanotubes

Recent high-resolution transmission electron microscopy (HREM) studies of multiwalled carbon nanotubes (MWCNTs) reveal a class of defects analogous to edge dislocations in a crystal. These defects are believed to mark the transition from scrolls on one side to nested tubes on the other. On the tube side, layer spacing becomes irregular. Analysis of the helicity of the tubes shows a strong correlation between diameter and helicity. This suggests that the organizing principle for the tubes is not Van der Waals forces, as in the case of graphite or turbostratic carbon, but preservation of helicity. Based on these observations and total energy calculations, the authors speculate that graphene monolayers initially form scrolls and subsequently transform into multiwall nanotubes through the progression of defects. Scrolls and nested tubes thus coexist within a single MWNT.     

Dissolution of perfluoroalkyl oligomers in lubricating oil for enhancing wear resistance and fuel economy

Perfluorobutyl-1,1,2-tri-H-1-hexene and perfluoroalkyl methacrylate have been solubilized in lubricating oil by single-step free radically grafting onto poly(ethylene-co-propylene). Perfluoroalkyl-1,1,2,2-tetra-H-ethanol and perfluoropolyether carboxylic acid were solubilized by condensing with poly[(ethylene-co-propylene)-g-glycidyl methacrylate], generating the corresponding perfluoroalkyl ether or ester, respectively. Solubilization of 1,1,2,2-tetra-H-ethanol was also achieved by condensing with poly[(ethylene-co-propylene)-g-2-isocyanoethyl methacrylate] to the corresponding perfluoroalkyl urethane. Scar diameter reductions ranged from 9.4 to 58% using perfluoro-modified graft copolymers as determined using the Four Ball Wear Test, although optimum reductions were obtained using perfluoroalkyl urethane-modified graft copolymers. Moreover, a semiquantitative correlation of scar reductions and thermal instability was determined. Sequence VI engine testing of perfluoroalkyl urethane graft copolymers containing pendant perfluoroalkyl chain lengths of 8.2 and 7.2 had an Equivalent Fuel Economy Index of 4.33 and 4.27, respectively. © 1994 John Wiley & Sons, Inc.     

Implementation of the quadrature method of moments in CFD codes for aggregation-breakage problems

In this work the quadrature method of moments (QMOM) is implemented in a commercial computational fluid dynamics (CFD) code (FLUENT) for modeling simultaneous aggregation and breakage. Turbulent and Brownian aggregation kernels are considered in combination with different breakage kernels (power law and exponential) and various daughter distribution functions (symmetric, erosion, uniform). CFD predictions are compared with experimental data taken from other work in the literature and conclusions about CPU time required for the simulations and the advantages of this approach are drawn.     

Thermal Conductivity,Phase Stability,and Oxidation Resistance of Y3Al5O12 (YAG)/Y2O3–ZrO2 (YSZ) Thermal-Barrier Coatings

This paper describes a new multilayer TBC that incorporates a 10 μm-thick oxygen barrier layer of yttrium–aluminum garnet (YAG) into a typical YSZ TBC system. The thermal conductivity of as-sprayed YAG/YSZ coatings was reduced due to excessive porosity and amorphous areas in the YAG layer. After long-term heat treatments, the conductivity of the multilayer was unaffected by the presence of YAG. Sintering and recrystallization of the amorphous YAG regions occurred during high-temperature heat treatments. While YAG itself possesses excellent phase stability, its presence also improved the phase stability of zirconia near the YAG/YSZ interface, inhibiting the outward diffusion of yttrium from high-yttria t-ZrO₂ The YAG layer reduced the NiCoCrAlY bond-coat oxidation rate by a factor of three during isothermalfurnace tests conducted at 1200° C.     

Building brains for bodies

We describe a project to capitalize on newly available levels of computational resources in order to understand human cognition. We are building an integrated physical system including vision, sound input and output, and dextrous manipulation, all controlled by a continuously operating large scale parallel MIMD computer. The resulting system will learn to think by building on its bodily experiences to accomplish progressively more abstract tasks. Past experience suggests that in attempting to build such an integrated system we will have to fundamentally change the way artificial intelligence, cognitive science, linguistics, and philosophy think about the organization of intelligence. We expect to be able to better reconcile the theories that will be developed with current work in neuroscience.     

ODTLES: A multi-scale model for 3D turbulent flow based on one-dimensional turbulence modeling

A novel multi-scale approach for extending the one-dimensional turbulence (ODT) model of [A.R. Kerstein. One-dimensional turbulence: model formulation and application to homogeneous turbulence, shear flows, and buoyant stratified flows, J. Fluid Mech. 392 (1999) 277] to treat turbulent flow in three-dimensional (3D) domains is described. In this model, here called ODTLES, 3D aspects of the flow are captured by embedding three, mutually orthogonal, one-dimensional ODT domain arrays within a coarser 3D mesh. The ODTLES model is obtained by developing a consistent approach for dynamically coupling the different ODT line sets to each other and to the large scale processes that are resolved on the 3D mesh. The model is implemented computationally and its performance is tested by performing simulations of decaying isotropic turbulence at two different Reynolds numbers and comparing to the experimental data of [H. Kang, S. Chester, C. Meneveau. Decaying turbulence in an active-grid-generated flow and comparisons with large-eddy simulations, J. Fluid Mech. 480 (2003) 129; G. Comte-Bellot, S. Corrsin, Simple Eulerian correlation of full-and narrow band velocity signals in grid-generated ’isotropic’ turbulence, J. Fluid Mech. 48 (1971) 273].     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

Task-Space Modular Dynamics for Dual-Arms Expressed through a Relative Jacobian

This paper presents modular dynamics for dual-arms, expressed in terms of the kinematics and dynamics of each of the stand-alone manipulators. The two arms are controlled as a single manipulator in the task space that is relative to the two end-effectors of the dual-arm robot. A modular relative Jacobian, derived from a previous work, is used which is expressed in terms of the stand-alone manipulator Jacobians. The task space inertia is expressed in terms of the Jacobians and dynamics of each of the stand-alone manipulators. When manipulators are combined and controlled as a single manipulator, as in the case of dual-arms, our proposed approach will not require an entirely new dynamics model for the resulting combined manipulator. But one will use the existing Jacobians and dynamics model for each of the stand-alone manipulators to come up with the dynamics model of the combined manipulator. A dual-arm KUKA is used in the experimental implementation.