MgO含量对CaO-SiO2-Al2O3-MgO熔渣中液态相影响的模拟

运用Factsage软件模拟了MgO含量对CaO-SiO₂-Al₂O₃-MgO熔渣中液相区的影响.结果表明,随着CaO-SiO₂-Al₂O₃-MgO渣中MgO含量增加,渣中低熔点液相区整体向低CaO高SiO₂区移动.相图中1500℃液相区比例由0%MgO（质量分数）时的25.05%上升至9%MgO（质量分数）时的52.69%,而后降至15%MgO时的46.70%.相图中1400℃液相区比例由3%MgO时的14.41%上升至11%MgO时的34.39%,而后降至15%MgO时的31.04%.相图中1300℃液相区比例由5%MgO时的5.57%上升至14%MgO时的11.02%,而后降至15%MgO时的10.50%.相图中1200℃液相区域比例在MgO为0~6%时为零,由7%MgO时的0.88%上升至11%MgO时的1.22%,在MgO为13%~15%时降为零.模拟结果可对以CaO-SiO₂-Al₂O₃-MgO为基本组元配置炼钢渣系的成分选择提供有效指导.     

高温低氧燃烧技术在唐钢高线厂的应用

为了使应用高温低氧燃烧技术的加热炉达到高效节能、低污染物特别是低NO_x排放的目的,采用计算机数值模拟优化设计了加热炉的蓄热式燃烧系统,并运用冶金反应工程学方法开发了成套技术.该技术在唐钢高速线材厂的实际应用表明:在热装钢坯条件下单位能耗为0.879 GJ/t,炉子热效率在67%以上,各蓄热室的排烟温度在160℃以下,NO_x排放小于40×10^-6(体积分数).     

A Predictive Instrument for Sensitive and Expedited Measurement of Ultra-Barrier Permeation

The reliable operation of flexible display devices poses a significant engineering challenge regarding the metrology of high barriers against water vapor. No reliable results have been reported in the range of 10^–6 g∙(m²∙d)⁻¹, and there is no standard ultra-barrier for calibration. To detect trace amount of water vapor permeation through an ultra-barrier with extremely high sensitivity and a greatly reduced test period, a predictive instrument was developed by integrating permeation models into high-sensitivity mass spectrometry measurement based on dynamic accumulation, detection, and evacuation of the permeant. Detection reliability was ensured by means of calibration using a standard polymer sample. After calibration, the lower detection limit for water vapor permeation is in the range of 10^–7 g∙(m²∙d)⁻¹, which satisfies the ultra-barrier requirement. Predictive permeation models were developed and evaluated using experimental data so that the steady-state permeation rate can be forecasted from non-steady-state results, thus enabling effective measurement of ultra-barrier permeation within a significantly shorter test period.     

从上海外滩建筑改造更新看历史街区的生命力再造

文章从上海外滩建筑的更新改造着手,对历史街区和建筑的再利用进行多视角的研究,并在此基础上分析了基于设计师、开发者以及政府的多角度的历史建筑改造策略.     

风电叶片全尺寸结构试验三维挠度测量研究

对风电叶片进行全尺寸结构试验时需要测量其挠度变形,目前使用拉绳传感器测量,但拉绳传感器只能实现单一方向测量,测量误差大且维数单一.为了解决上述问题,推导一种用于叶片三维挠度精准测量的数学模型,进一步结合超宽带无线测距技术搭建了无线测量系统,使用该系统进行叶片静力加载挠度测量试验,并与激光跟踪仪测量结果进行对比.结果表明...     

综采放顶煤沿空窄煤柱巷道锚杆支护

随着采煤机械化程度的不断提高,我国的煤炭资源日益枯竭,另一方面,采煤技术的日趋成熟、支护材料强度的不断提高,也为采用小煤柱开采提供了可能。从保证窄煤柱承载能力、顶锚杆支护形式、小孔径锚索加固、顶板预注浆等方面论述了采用窄煤柱支护的可靠性。     

Patent data based search framework for IT R&D employees for convergence technology

Scientometrics - As technology convergence is attracting increasing attention, many companies pay attention to human resources planning for the convergence R&D. This study proposes a...     

A simple apparatus for safety assessment of magnetically induced torque on active implantable medical devices (AIMDs) under 1.5 T and 3.0 T MRI

Magnetic Resonance Materials in Physics, Biology and Medicine - Our goal is to design and validate a simple apparatus for the safety assessments of magnetically induced torques by four active...