Core/Rim Structure of Liquid-Phase-Sintered Silicon Carbide

Plasma etching in conjunction with scanning and analytical transmission electron microscopy was used to characterize the microstructure and microchemistry of silicon carbide sintered with yttrium-aluminum garnet (YAG). The SiC grains comprise a core/rim structure with small amounts of excess yttrium, aluminum, and oxygen being present in the rim while these elements are missing in the core. The core/rim interface was found to be coherent, and both the core and the rim are composed of the same polytype, predominantly the 6H structure. These results suggest that Ostwald ripening by solution and reprecipitation controls the sintering mechanism in this system.     

Untersuchungen zum SwRK-Verhalten des unlegierten Stahles Ck 45 in chloridionenhaltigen wäßrigen Medien

Corrosion fatigue behaviour of steel Ck 45 in aqueous solutions containing chloride ions The fatigue behaviour of carbon steel Ck 45 (comparable to AISI 1045x) is investigated for cyclic tension and rotating bending load with a frequency of 25 Hz. The fatigue limits under cyclic tension load in air are 410 N/mm² for smooth specimens and 290 N/mm² for notched specimens. For rotating bending load a value of 200 N/mm² is found for smooth specimen. The fatigue limits for N = 10⁷ in two different environments (0.3% and 3% NaCl-solution) reach only 37–57% of the according values in air. Cathodic protection of smooth specimens causes an improvement to 95% of the air fatigue limit. The evaluation of the free corrosion potential for all corrosion fatigue tests and the appearence of fracture show typical attributes of corrosion fatigue in the active state.     

Fungal Infection Reduces Herbivore-Induced Plant Volatiles of Maize but does not Affect Naïve Parasitoids

Plants attacked by insects release volatile compounds that attract the herbivores' natural enemies. This so-called indirect defense is plastic and may be affected by an array of biotic and abiotic factors. We investigated the effect of fungal infection as a biotic stress agent on the emission of herbivore-induced volatiles and the possible consequences for the attraction of two parasitoid species. Maize seedlings that were simultaneously attacked by the fungus Setosphaeria turcica and larvae of Spodoptera littoralis emitted a blend of volatiles that was qualitatively similar to the blend emitted by maize that was damaged by only the herbivore, but there was a clear quantitative difference. When simultaneously challenged by fungus and herbivore, the maize plants emitted in total 47% less of the volatiles. Emissions of green leaf volatiles were unaffected. In a six-arm olfactometer, the parasitoids Cotesia marginiventris and Microplitis rufiventris responded equally well to odors of herbivore-damaged and fungus- and herbivore-damaged maize plants. Healthy and fungus-infected plants were not attractive. An additional experiment showed that the performance of S. littoralis caterpillars was not affected by the presence of the pathogen, nor was there an effect on larvae of M. rufiventris developing inside the caterpillars. Our results confirm previous indications that naïve wasps may respond primarily to the green leaf volatiles.     

Deformation behavior of isotactic polypropylene crystallized via a mesophase

The mechanical behavior of semicrystalline isotactic polypropylene (iPP) of different crystallinity, crystal morphology and superstructure was investigated by standard tensile stress–strain analysis, dynamic-mechanical analysis, and in situ observation of the deformation by atomic force microscopy (AFM). Emphasis is put on the comparison of the mechanical characteristics of specimens containing either non-isometric lamellae, being arranged in spherulites, or nodular isometric domains, which are not organized in a superstructure. The formation of lamellae/spherulites and of nodules was controlled by the conditions of crystallization. The replacement of cross-hatched monoclinic lamellae and a spherulitic superstructure by randomly arranged isometric nodules leads to a distinct increase of the ductility and toughness, even if the crystallinity is identical. The modulus of elasticity and the yield stress increase as expected with increasing crystallinity. Slightly lower values of Young’s modulus and yield strength are detected if samples contained non-lamellar crystals in a non-spherulitic superstructure, proving an effect of the crystal shape on the deformation behavior. For the first time, tensile deformation of semicrystalline iPP which contains nodular ordered domains instead of lamellae has been followed by in situ AFM.     

Sintering Mechanisms of Zirconium and Hafnium Carbides Doped with MoSi2

The microstructure of two pressureless-sintered ultra-high-temperature ceramics, namely ZrC+20 vol% MoSi₂ and HfC+20 vol% MoSi₂, was characterized by scanning and transmission electron microscopy. With regard to the ZrC–MoSi₂ system, Zr _x Si _y compounds and SiC were detected. In the HfC–MoSi₂ system, a mixed phase was detected at the triple points and identified as (Mo,Hf)₅Si₃. For both the systems investigated, the high wettability of the silicide-based phases on the matrix grains suggests that sintering is assisted by a liquid phase. This contribution reports for the first time on the sintering mechanisms of early transition metal carbides doped with MoSi₂ as a sinter additive, on the basis of the microstructural evolution observed upon sintering and in the light of phase diagrams and thermodynamical calculations.     

Field-Assisted Densification of Superhard B6O Materials with Y2O3/Al2O3 Addition

B₆O is a possible candidate of superhard materials with a hardness of 45 GPa measured on single crystals. Up to now, densification of these materials was only possible at high pressure. However, recently it was found that Al₂O₃ can be utilized as an effective sintering additive, similar to the addition of Y₂O₃/Al₂O₃ that was used in this work. The densification behavior of the material as a function of applied pressure, its microstructure evolution, and the resulting mechanical properties were investigated. A strong dependence of the densification with increasing pressure was found. The material revealed characteristic triple junctions filled with amorphous residue composed of B₂O₃, Al₂O₃, and Y₂O₃, while no amorphous grain-boundary films were observed along internal interfaces. Mechanical testing revealed on average a hardness of 33 GPa, a fracture toughness of 4 MPa·m^1/2, and a strength value of 520 MPa.     

Effect of Ca and B incorporation into silicon oxycarbide on its microstructure and phase composition

Ca- and/or B-modified silicon oxycarbides were synthesized via pyrolysis of suitable polysilsesquioxane-based single-source precursors. Their polymer-to-ceramic transformation was investigated with thermogravimetric analysis, coupled with in situ evolved gas analysis. The prepared silicon oxycarbides were investigated with respect to their crystallization behavior, network architecture, and chemical compositions. The network connectivity in silicon oxycarbides can be affected/tuned upon using two different “tools”: (a) first, the use of network modifiers, such as Ca in our study, leads to a slight depolymerization of the network via generation of a small amount of Q³ sites; (b) second, the modification of silicon oxycarbide with B/Ca leads to a decrease of the carbon content in the network and thus to a significant decrease of its connectivity. Using these two different effects, the network connectivity in silicon oxycarbides can be finely tuned.     

Human DDX17 Unwinds Rift Valley Fever Virus Non-Coding RNAs

Rift Valley fever virus (RVFV) is a mosquito-transmitted virus from the Bunyaviridae family that causes high rates of mortality and morbidity in humans and ruminant animals. Previous studies indicated that DEAD-box helicase 17 (DDX17) restricts RVFV replication by recognizing two primary non-coding RNAs in the S-segment of the genome: the intergenic region (IGR) and 5′ non-coding region (NCR). However, we lack molecular insights into the direct binding of DDX17 with RVFV non-coding RNAs and information on the unwinding of both non-coding RNAs by DDX17. Therefore, we performed an extensive biophysical analysis of the DDX17 helicase domain (DDX17_135–555) and RVFV non-coding RNAs, IGR and 5’ NCR. The homogeneity studies using analytical ultracentrifugation indicated that DDX17_135–555, IGR, and 5’ NCR are pure. Next, we performed small-angle X-ray scattering (SAXS) experiments, which suggested that DDX17 and both RNAs are homogenous as well. SAXS analysis also demonstrated that DDX17 is globular to an extent, whereas the RNAs adopt an extended conformation in solution. Subsequently, microscale thermophoresis (MST) experiments were performed to investigate the direct binding of DDX17 to the non-coding RNAs. The MST experiments demonstrated that DDX17 binds with the IGR and 5’ NCR with a dissociation constant of 5.77 ± 0.15 µM and 9.85 ± 0.11 µM, respectively. As DDX17_135–555 is an RNA helicase, we next determined if it could unwind IGR and NCR. We developed a helicase assay using MST and fluorescently-labeled oligos, which suggested DDX17_135–555 can unwind both RNAs. Overall, our study provides direct evidence of DDX17_135–555 interacting with and unwinding RVFV non-coding regions.