B737机务CBT系统建设方案的探讨

通过对AICC制订的CBT课件开发规范的探讨，阐述了CBT的基本概念和波音737飞机机务CBT的开发制作过程，以及利用Authorware开发软件制作多媒体课件的技术难点。     

Power Distribution Fault Cause Identification With Imbalanced Data Using the Data Mining-Based Fuzzy Classification E-Algorithm

Power distribution systems have been significantly affected by many outage-causing events. Good fault cause identification can help expedite the restoration procedure and improve the system reliability. However, the data imbalance issue in many real-world data sets often degrades the fault cause identification performance. In this paper, the E-algorithm, which is extended from the fuzzy classification algorithm by Ishibuchi to alleviate the effect of imbalanced data constitution, is applied to Duke Energy outage data for distribution fault cause identification. Three major outage causes (tree, animal, and lightning) are used as prototypes. The performance of E-algorithm on real-world imbalanced data is compared with artificial neural network. The results show that the E-algorithm can greatly improve the performance when the data are imbalanced     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Leiomyomatosis peritonealis disseminata. Two case reports

AIM: To study the action of quercetin (Que) on inhibiting platelet aggregation. METHODS: Active oxygen free radicals produced by xanthine/xanthine oxidase (Xan/XO) reaction was used, platelet aggregation was determined by the turbidimetric method, and the Xan/XO oxyradicals generating reaction by luminol-dependent chemiluminescence (Che) method. RESULTS: Active oxygen free radicals enhanced the platelet aggregation induced by ADP 1.6 mumol.L-1. The rate of maximal aggregation increased from 29%-38% for ADP to 59%-70% for ADP + Xan/XO. The enhancement was abolished by the treatment of platelet-rich plasma (PRP) with Que 650 mumol.L-1 or hydrocortisone (Hyd) 900 mg.L-1. Both Que and Hyd scavenged the active oxyradicals in vitro. The Che was decreased by 75.7% (Que 4 mumol.L-1) and 79.0% (Hyd 900 mg.L-1) as compared with control. CONCLUSION: Active oxygen free radicals participated in the platelet aggregation, and scavenging oxyradicals by Que was one of mechanisms of inhibiting platelet aggregation.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Performance analysis of the bidirectional associative memory and animproved model from the matched-filtering viewpoint

This paper discusses the bidirectional associative memory (BAM) model from the matched-filtering viewpoint and offers it a new interpretation. Our attention is focused on the problem of stability and attractivity of equilibrium states. Several sufficient and/or necessary conditions are presented. To improve the BAM performance, an exponential function is used to enhance the correlations between the binary vectors of the retrieval key and that of the stored pattern similar to the key. The modified model is shown to be asymptotically stable. Theoretical analysis and simulation results demonstrate that the modified model performs much better than the original BAM in terms of memory capacity and error correction capability.     

Novel algorithms for shared segment protection

The major challenges in designing survivable schemes are how to allocate a minimal amount of spare resources (e.g., bandwidth) using fast (e.g., polynomial-time) algorithms, and, in case a failure occurs, to be able to recover quickly from it. All existing approaches invariably make tradeoffs. We propose novel shared segment protection algorithms which make little or no compromise . We develop an elegant integer linear programming (ILP) model to determine an optimal set of segments to protect a given active path. Although the ILP approach is useful for a medium-size network, it is too time consuming for large networks. Accordingly, we also design a fast heuristic algorithm based on dynamic programming to obtain a near-optimal set of segments. Although the heuristic algorithm has a polynomial time complexity, it can achieve a bandwidth efficiency as high as some best-performing shared path protection schemes and, at the same time, much faster recovery than these shared path protection schemes. The proposed scheme is also applicable to a wide range of networking technologies, including Internet Protocol and wavelength-division multiplexing networks under the generalized multiprotocol label switched framework.     

Occlusion-resistant camera design for acquiring active environments.

In this article, we present a detailed theoretical analysis and a prototype implementation of a family of cameras designed with the explicit goal of detecting and removing interfering dynamic occluders in real time, during live capture, as opposed to fixing the resulting artifacts a posteriori. Such an early-acquisition approach improves efficiency: more valid samples are acquired faster without worrying about moving occluders. One option for designing a camera to be unaffected by moving occluders is to sample through the occluder, but true x-ray-like vision is technically impractical. Another option is to sample around the occluder using a camera with a large effective aperture, but such an approach requires a bulky acquisition device. Yet another possibility of sampling around an occluder is to rely on second and higher order reflected rays that indirectly sample surfaces not directly visible. However, devising an acquisition device sufficiently sensitive and efficient to capture large environments using reflected rays will remain challenging for the foreseeable future.