PLL design technique by a loop-trajectory analysis taking decision-circuit phase margin into account for over-10-Gb/s clock and data recovery circuits

A design technique for an over-10-Gb/s clock and data recovery (CDR) IC provides good jitter tolerance and low jitter. To design the CDR using a PLL that includes a decision circuit with a certain phase margin affecting the pull-in performance, we derived a simple expression for the pull-in range of the PLL, which we call the "limited pull-in range," and used it for the pull-in performance evaluation. The method allows us to quickly and easily compare the pull-in performance of a conventional PLL with a full-rate clock and a PLL with a half-rate clock, and we verified that the half-rate PLL is advantageous because of its wider frequency range. For verification of the method, we fabricated a half-rate CDR with a 1:16 DEMUX IC using commercially available Si bipolar technology with f/sub T/=43 GHz. The half-rate clock technique with a linear phase detector, which is adopted to avoid using the binary phase detector often used for half-rate CDR ICs, achieves good jitter characteristics. The CDR IC operates reliably up to over 15 Gb/s and achieves jitter tolerance with wide margins that surpasses the ITU-T specifications. Furthermore, the measured jitter generation is less than 0.4 ps rms, which is much lower than the ITU-T specification. In addition, the CDR IC can extract a precise clock signal under harsh conditions, such as when the bit error rate of input data is around 2/spl times/10/sup -2/ due to a low-power optical input of -24 dBm.     

ACCELERATION OF CRACK GROWTH UNDER INTERMITTENT OVERSTRESSING IN DIFFERENT ENVIRONMENTS

Fatigue crack growth behaviour under intermittent overstressing was investigated in moist air, dry air, nitrogen and vacuum with low carbon steels under tension-compression loading with a few tests under compression-tension loading. A very small number of cycles of overstress applied intermittently during a very large number of cycles of understress below threshold caused significant acceleration, of about one hundred times, in crack growth rate as compared to the case of steady cyclic stress in the cases of moist air, dry air and nitrogen. In the region of low understress, the acceleration in moist air was appreciably less than that in dry air and nitrogen due to oxide-induced crack closure. The acceleration in vacuum was smaller than that in other environments over all understress levels, possibly because of rewelding. There was no effect of an overstress sequence on the acceleration.     

A study of transfer switching for the purpose of fault detection in FRIENDS

The authors have proposed a new concept of a distribution system “Flexible, Reliable and Intelligent ENergy Delivery System (FRIENDS)” with intent to solve imminent operating problems faced by utilities in providing their customers with reliable supply of power at several levels of quality. The main idea of FRIENDS is to introduce new facilities, so‐called Quality Control Centers (QCCs), which are installed very close to the customers for the purpose of implementing multiple functions, such as Customized Power Quality Service. In addition, these QCCs form a network for energy and information transmission at a level below distribution substations. QCCs make it possible to frequently change configuration of the network depending on the system and load conditions. These frequent reconfigurations of the network require fast and reliable Transfer Switching in the QCCs to ease an effect on customers. The reconfiguration for the purpose of fault area isolation also requires a fast Fault Detection feature. This paper presents a new method for controlling Transfer Switching and a method of Fault Detection in order to realize a fast and reliable reconfiguration of QCC network in a normal state, as well as under fault conditions. This paper also analyzes the methods in terms of instantaneous values calculated by PSCAD/EMTDC. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(3): 25–35, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10298     

The relative neighborhood graph for mixed feature variables

The rectangular influence graph (RIG) is presented as an extension of the relative neighborhood graph (RNG). The RNG is an efficient tool for analyzing the clustering of multidimensional feature vectors when all the features are quantitative. The RIG is a similar tool that can accommodate feature vectors some of whose components are qualitative. We show that the RIG is a superset of the Gabriel graph with respect to any Minkowski metric.As tools to analyze interclass structure, the interclass RIG (IRIG) and the mutual neighborhood graph (MNG) are presented. These graphs can be used to reduce the training set in the design of piecewise linear classifiers. The MNG leads also to a sufficient condition for the linear separability between classes.     

Tetrahedron treatment of the fcc lattice

A computer program for calculating the disorder-order phase diagrams of FCC-based binary alloys is presented. The cluster variation method is used, with the tetrahedron as the basic cluster. Ordered phases are the Cu₃Au type (L1₂) and the CuAu type (L1₀). Energy parameters are independent of temperature and composition, and include the many-body effect within a tetrahedron. A detailed explanation of the computer program is presented in the main body of the paper. Three example calculations are shown.     

Effect of coal particle size on the coal hydrogenation reaction — In relation to the plasticity of coal

The effect of coal particle size on the catalytic hydrogenation of dry coal was investigated for three Hokkaido coals (Japan) of different ranks. It was found that the effect of coal particle size on conversion is dependent on coal rank. A greater difference in conversion with respect to coal particle size is noticed for coals of lower carbon content. The physical appearance of the products in the autoclave after the reaction suggests that the effect of particle size on conversion is dependent on the plastic properties of the heated coal sample. When the reaction proceeds with coal in the plastic state, the effect of particle size is small. As indicated by the product distribution, the plastic properties of a coal sample are related to the yield of asphaltene (hexane insoluble/benzene solubles) and/or the structural parts of original coal which yield asphaltene.     

Transient thermoelastic analysis of infinite plates with time-periodic heat transfer coefficient: Frequency response of thermal stress

An analytical method is presented for one-dimensional transient heat conduction and associated thermal stress problems of a layered infinite plate whose heat transfer coe?cient (HTC) on one external boundary is an arbitrary function of time. A shifting function method and an orthogonal expansion technique are used to obtain analytical solutions to the problems. Using the solutions, the structural response to sinusoidal HTC oscillation is investigated in single and bilayered plates, the other boundary of which is kept at constant temperature. Numerical results demonstrate the effects of average HTC (measured by the Biot number) and mechanical boundary conditions on the frequency responses of temperature and thermal stress. It is found that the range of stress oscillation decreases with an increase in the frequency of HTC oscillation except for single-layered plates without surface tractions.