A rod-shaped vibro touch sensor using PZT thin film

We have fabricated a probe sensor. This sensor is for high precision coordinate measuring machines, surface roughness measuring tools, or scanning probe microscopes (SPM). This sensor consists of a rod vibrating in the axial direction. The longitudinal vibration was excited and also detected by PZT thin film. The PZT thin film was fabricated by a hydrothermal method. The hydrothermal method uses the reaction process in hot and high pressure aqueous solutions. We made a 27.8-mm long sensor. Its resonance frequency was 116 kHz. The sensitivity and resolution were evaluated by experiments. We succeeded in oscillating the rod and detecting the contact.     

Cationic Copolymer‐Chaperoned 2D–3D Reversible Conversion of Lipid Membranes

Nanosheets have thicknesses on the order of nanometers and planar dimensions in the micrometer range. Nanomaterials that are capable of converting reversibly between 2D nanosheets and 3D structures in response to specific triggers can enable construction of nanodevices. Supra‐molecular lipid nanosheets and their triggered conversions to 3D structures including vesicles and cups are reported. They are produced from lipid vesicles upon addition of amphiphilic peptides and cationic copolymers that act as peptide chaperones. By regulation of the chaperoning activity of the copolymer, 2D to 3D conversions are reversibly triggered, allowing tuning of lipid bilayer structures and functionalities.     

PRECISION CUTTING OF MOLDING DIE USING SQUARE END MILL

The precision cutting of a molding die is realized using a square end mill on a 5-axis control machine. In this study, first the tool setting errors are analyzed and the compensation method of the errors is proposed. The effectiveness of compensation in precision cutting is confirmed. Next, the form accuracy of the spiral tool pass is compared with contour one in precision cutting of a spherical surface. Finally, the molding die with spherical surface is manufactured using a square end mill made out of single-crystal diamond based on the results of the compensation of the errors and the comparison of the two tool passes, and the form accuracy and surface roughness of the molding die are measured.     

First-principles molecular-dynamics calculations on chemical reactions and atomic structures induced by H radical impinging onto Si(001)2 x 1:H surface

Chemical reactions between hydrogen terminated Si(001)2 x 1 surface and impinging H radical are investigated by means of first-principles molecular-dynamics simulations. Reaction probabilities of abstraction of surface terminating H atom with H2 formation, adsorption onto Si surface and reflection of impinging H atom are analyzed with respect to the kinetic energy of incident H radical. The probabilities of abstraction and adsorption turn out to be ranging from 0.81 to 0.58 and from 0.19 to 0.42, respectively, while that of reflection almost zero. As initial kinetic energy of the impinging atom increases, the reaction probability of abstraction decreases and that of absorption increases. Metastable H-absorbed atomic configurations are also derived by optimizing the structures obtained in the impinging dynamics calculations. They are candidates of the so-called reservoir site which is a key to understand the unity hydrogen coverage observed after an exposure to gaseous H atom ambient despite existing residual vacant sites due to abstraction.     

Condensation and Collapse of Vapor Bubbles Injected in Subcooled Pool

We focus on condensation and collapse processes of vapor bubble(s) in a subcooled pool. We generate the vapor in the vapor generator and inject it/them to form vapor bubble(s) at a designated temperature into the liquid at a designated degree of subcooling. In order to evaluate the effect of induced flow around the condensing/collapsing vapor bubble, two different boundary conditions are employed; that is, the vapor is injected through the orifice and the tube. We also focus on interaction between/among the condensing/collapsing vapor bubbles laterally injected to the pool. Through this system we try to simulate an interaction between the vapor bubble and the subcooled bulk in a complex boiling phenomenon, especially that known as MEB (microbubble emission boiling) in which a higher heat flux than critical heat flux (CHF) accompanying with emission of micrometer-scale bubbles from the heated surface against the gravity is realized under a rather high subcooled condition.     

Styryl silsesquioxane photoresist

There is a substantial need for photopattern‐able, heat resistant, and transparent materials that are applicable to electronic devices, such as imaging or display elements. Styryl silsesquioxane based photoresist forms thin micro patterns after i‐line exposure and alkaline development, and the resulting transparent film shows remarkable heat resistance. Radicals generated from a photoinitiator induce polymerization of styryl functionality in the photoresist film to form the micropatterns. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41459.     

Investigation of Reduction and Smelting Mechanism in the Hi‐QIP Process

A new coal‐based reduction and smelting process for production of high quality iron pebbles in a rotary hearth furnace (Hi‐QIP Process) was developed. The reduction, carburization, smelting, and separating mechanism of the Hi‐QIP process were investigated. The experiments were carried out in a graphite heater furnace under rapidly heating up to 1773 K. A mixture of coal and ore produced molten metal and slag, which were held on the coal and did not come into contact with the refractory located under the coal layer. It is confirmed that the reduction of wettability between the iron and slag promotes the separation of them, when the content of FeO slag decreases. High productivity of the process is expected when using iron ore with small particle diameter and low gangue content. Favourable operating results were obtained in a pilot test using a rotary hearth furnace with a diameter of 7 m and a width of 1.5 m. This test demonstrated the possibility of continuous production of iron pebbles with high productivity (15t‐iron/d).     

Selective inhibition of cyclooxygenase-2 by NS-398 in endotoxin shock rats in vivo

OBJECTIVE AND DESIGN: The role of cyclooxygenase (COX)-2 was examined using a rat endotoxin shock model and the potency and selectivity of NS-398, a COX-2 selective inhibitor in vitro, for COX-2 activity was examined in vivo. MATERIAL: Male Wistar rats (weighing 140-180 g) were used. METHODS: Lipopolysaccharide (LPS, 1 mg/kg, i.v.) was administered to rats (LPS-treated rats) and expression of COX-1 mRNA and COX-2 mRNA in the aorta and peripheral blood leukocytes was examined by RT-PCR. COX activity was assessed by measuring the plasma 6-keto prostaglandin (PG) F1 alpha, PGE2 and thromboxane (TX)B2 30s after administration of arachidonic acid (AA, 3 mg/kg, i.v.), NS-398 (0.3-100 mg/kg, p.o.) or indomethacin (0.3-3 mg/kg, p.o.) was administered 1 h before the AA injection. RESULTS: COX-2 mRNA was detectable in the aorta and peripheral blood leukocytes at least from 3 to 9 h after the LPS injection but not in non-LPS-treated rats. Plasma 6-keto PGF1 alpha, PGE2 and TXB2 levels after AA injection into LPS-treated rats were significantly enhanced compared to findings in non-LPS-treated rats. NS-398 showed significant inhibition of the increase in PGs in LPS-treated rats, the ED50 values being 0.35 mg/kg for 6-keto PGF1 alpha, 1.5 mg/kg for PGE2 and < 0.3 mg/kg for TXB2. NS-398 even at 100 mg/kg did not significantly suppress the increased PGs levels in non-LPS-treated rats. In contrast, indomethacin significantly inhibited plasma PGs levels after AA injection into LPS-treated rats and non-LPS-treated rats. The ED50 values in LPS-treated rats, determined by 6-keto PGF1 alpha, PGE2 and TXB2 production, were 1.0, 1.3 and 2.3 mg/kg and those in non-LPS-treated rats were 0.42, 0.24 and 0.93 mg/kg, respectively. CONCLUSIONS: In a rat endotoxin shock model, expression of COX-2 plays a role in an increase in COX activity. NS-398 showed preferential inhibitory effects on COX-2 activity in vivo. This approach is useful to directly analyze the inhibitory activity of NSAIDs for COX-1 and COX-2 in vivo.     

Dip Coating of Water-Resistant PEDOT:PSS Films Based on Physical Crosslinking

Water-resistant poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are valuable in biomedical applications; however, they typically require crosslinkers to stabilize the films, which can introduce undesired aggregation or phase separation reactions. Herein, a dipping-based process to prepare PEDOT:PSS films on nonplanar surfaces without crosslinker is developed. Sequential soaking of a dip-coated PEDOT:PSS film in ethanol and water imparts water resistance to the film. Microscopic and spectroscopic techniques are used to monitor the process and confirm that the ethanol soaking elutes the excess PSS from the film bulk, which stabilizes the film prior to the water-soaking process. The obtained films act as conductors and semiconductors on curved surfaces, including 3D-printed objects. A film deposited on a curved surface is successfully applied as the channel layer in a neuromorphic organic electrochemical transistor. This approach can enable integrated bioelectronic and neuromorphic applications that can be readily deployed for facile prototyping.