Autoscan: a scan design without external scan inputs or outputs

We propose a design-for-testability technique for synchronous sequential circuits called autoscan. Autoscan uses scan chains similar to conventional scan. However, it gives up the external scan inputs and outputs in order to eliminate the test data volume associated with them. Scan operations under autoscan improve the circuit testability by allowing the circuit state to be modified through shifting. Due to the removal of the scan inputs and outputs, synthesis of scan chains under autoscan does not have to satisfy all the constraints imposed on conventional scan chains. We describe a synthesis procedure for autoscan chains, and demonstrate that autoscan allows us to detect almost all the faults that are detectable using conventional scan. We use random sequences in order to show that sequential test generation is not necessary under autoscan. We also describe a test generation procedure, and discuss the effect of autoscan on fault diagnosis.     

Modelling biological processes under anaerobic conditions through integrating titrimetric and off-gas measurements-applied to EBPR systems.

An innovative method for modelling biological processes under anaerobic conditions is presented and discussed. The method is based on titrimetric and off-gas measurements. Titrimetric data is recorded as the addition rate of hydroxyl ions or protons that is required to maintain pH in a bioreactor at a constant level. An off-gas analysis arrangement measures, among other things, the transfer rate of carbon dioxide. The integration of these signals results in a continuous signal which is solely related to the biological reactions. When coupled with a mathematical model of the biological reactions, the signal allows a detailed characterisation of these reactions, which would otherwise be difficult to achieve. Two applications of the method to the enhanced biological phosphorus removal processes are presented and discussed to demonstrate the principle and effectiveness of the method.     

Force criteria of the state of limiting equilibrium of a cracked plate under biaxial loading

We deduce the theoretical formula taking into account the influence of biaxial loading of a plate weakened by a crack on the stress intensity factor K _I. This enables us to compute the characteristic of crack resistance K _c according to the known boundary forces. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 6, pp. 14–16, November–December, 2007.     

PECVD of diamond-like carbon (a-C:H) from the decomposition of methane in a high-density inductively coupled discharge

The paper describes an experimental investigation of the diamond-like carbon deposition process from methane precursor with an innovative high-density inductively coupled plasma source. It appears that a high plasma density allows a fast growth of diamond-like carbon coatings exhibiting a high hardness. In contrast to what is usually found in the literature, it seems that the ion species participate significantly to the growth of the carbon film when exposed to a high ion flux.     

Low-temperature pyroelectric properties of Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>

The pyroelectric properties of lithium sulfate have been studied theoretically on the hypothesis of a pseudosymmetry of the structure of its polar phase. Analytical expressions are proposed for the temperature dependences of its pyroelectric polarization and pyroelectric coefficient at low temperatures and near the polymorphic transformation. The pyroelectric and piezoelectric coefficients of a polar crystal are shown to be in direct proportion.     

Results of testing a centrifugal bubble singlet-oxygen generator

The results of parametric tests of a centrifugal bubble singlet-oxygen generator based on the reaction of chlorine with an alkaline hydrogen peroxide solution have been given. The utilization of chlorine grows with bubble-layer height, whereas the relative content of O₂(¹Δ) remains constant. Growth in centrifugal acceleration leads to a more efficient utilization of chlorine. A specific oxygen output of more than 1 mmole·cm⁻²·sec⁻¹ from the bubble layer for a degree of chlorine utilization of ∼95% and a singlet-oxygen yield of more than 50% has been attained. It has been shown that a centrifugal bubble singlet-oxygen generator is an efficient energy source for an oxygen-iodine laser. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 3, pp. 121–128, May–June, 2007.     

Fast numerically stable computation of orthogonal Fourier?Mellin moments

An efficient algorithm for the computation of the orthogonal Fourier-Mellin moments (OFMMs) is presented. The proposed method computes the fractional parts of the orthogonal polynomials, which consist of fractional terms, recursively, by eliminating the number of factorial calculations. The recursive computation of the fractional terms makes the overall computation of the OFMMs a very fast procedure in comparison with the conventional direct method. Actually, the computational complexity of the proposed method is linear O(p) in multiplications, with p being the moment order, while the corresponding complexity of the direct method is O(p²). Moreover, this recursive algorithm has better numerical behaviour, as it arrives at an overflow situation much later than the original one and does not introduce any finite precision errors. These are the two major advantages of the algorithm introduced in the current work, establishing the computation of the OFMMs to a very high order as a quite easy and achievable task. Appropriate simulations on images of different sizes justify the superiority of the proposed algorithm over the conventional algorithm currently used     

Reduction of optical beat interference using gain-saturated RSOA in upstream WDM/SCM optical links

A new scheme for reducing optical beat interference (OBI) noise in optical network units is proposed for subcarrier multiplexing-based access network applications. The optical spectrum of the transmit lasers is broadened by using a radio frequency (RF) clipping tone with a modulation depth greater than one. This reduces the impact of the OBI noise. The distortions caused by an RF clipping tone are also suppressed by introducing a gain-saturated reflective optical amplifier, which shows the characteristics of high-pass filter. The proposed scheme has been verified by measuring the error vector magnitude of 16QAM signal with 20 Mbps. Error-free transmission has been achieved even when the light of OBI-noise-causing lasers is stronger than that of the signal laser by 7 dB     

Singular Trajectories in Multi-Input Time-Optimal Problems: Application to Controlled Mechanical Systems

This paper deals with the time-optimal control problem for a class of control systems which includes controlled mechanical systems with possible dissipation terms. The Lie algebras associated with such mechanical systems have certain special properties. These properties are explored and used in conjunction with the Pontryagin maximum principle to determine the structure of singular extremals and, in particular, time-optimal trajectories. The theory is illustrated by an application to a time-optimal problem for a class of underwater vehicles.