电镀工艺条件变化对片状铁吸收剂吸波性能的影响

通过电镀法制备片状磁性吸收剂，用SEM、XRD等手段对其进行表征。用网络分析仪测试了不同工艺条件下吸收剂样品2～18GHz的电磁参数，并结合晶粒尺寸因素研究了不同工艺条件下对吸收剂电磁参数的影响．结果表明，不同的工艺条件对吸收剂电磁参数的影响具有规律性，可通过合理配置工艺参数来提高吸收剂的吸波性能。     

EFFECT OF DIETARY SORGHUM DISTILLERY RESIDUE ON HEMATOLOGICAL CHARACTERISTICS OF CULTURED GREY MULLET (MUGIL CEPHALUS)—AN ANIMAL MODEL FOR PRESCREENING ANTIOXIDANT AND BLOOD THINNING ACTIVITIES

The sorghum distillery residue (SDR) has been an underutilized by‐product with estimated production of 150 ton/day in Kinmen, Taiwan. The objective of this study was to test for any physiological effects of SDR, thus to utilize it as a nutraceutical feed ingredient in diets for cultured fish. Hot air‐dried, wet, and dehulled‐wet sorghum distillery residue showed 63%, 90% and 97% inhibition of the hemoglobin‐catalyzed oxidation of linoleic acid compared to soybean (13%) and rice bran (78%). The feed formulated with 20% wet or dehulled‐wet sorghum distillery residue both showed an antioxidant activity of 68% being higher than the control diet (53%). Feeding these diets to cultured grey mullet for 60 days in summer (temperature ranged 24–30C), resulted in a lower hydroperoxide content in gill tissue, as shown by a chemiluminesence intensity of 1806 or 1409 mV as opposed to 2666 mV for fish fed a control diet. In winter, when the water temperature decreased to 14C, grey mullet fed a diet consisting of 10% dehulled wet sorghum distillery residue had a blood viscosity of 1.9 mPas and a hematocrit value of 33%, in contrast to 3.6 mPas and 41% for control. The blood of the control group started to aggregate in 6 h and showed hemolysis, while the mullet fed dehulled, wet sorghum distillery residue did not show blood aggregation, maintained normal fluidity and erythrocyte membrane integrity. It seems that cultured fish may have the potential as an animal model for prescreening antioxidant and blood thinning effects of food ingredients.     

引线框架材料QFe2.5加工工艺研究

本文介绍引线框架材料的发展现状，讨论引线框架用铜合金的强化机理，童点阐述引线框架用QFe2．5铜合金带材的性能及主要生产工艺（铸锭加热、热轧、时效退火等）。     

新型水泥浆实心减轻材料FXW在固井中的应用研究

低密度水泥浆常用泡沫和漂珠作为减轻材料，但泡沫和漂珠的一个共同缺陷是承压能力有限。在现场使用时，地面密度和井下密度是不一致的，这将打破注水泥压力平衡，给固井施工带来一定的风险。为此，通过大量实验，根据颗粒紧密堆积原则，以粉煤灰、改性橡胶粉、微硅、石灰类矿物等为原料，复配出一种新型实心耐压减轻材料 FXW 。由于FXW为实心减轻材料，能够承受压力，因而能够适应井下高压条件。实验表明，FXW低密度水泥浆强度高，韧性好，可更好地满足油气井后期开发需求。     

液化石油气磁力泵改造

对输送液化石油气磁力泵在运行1个月后出现的故障进行了分析,提出了在磁路、气路及安装等方面采取的一些改进措施。     

Φ4.0m×60m回转窑辐射热的应用

水泥厂回转窑简体内砌筑了耐火砖隔热,但仍有部分热通过简体以辐射的形式散失到大气中,吸收利用这部分辐射热也是一项节能减排的举措.     

单层开采的圆形定压边界两层油藏压力动态分析

为更好地分析具有越流的多层油藏的压力动态，采用有效井径的概念，在半透壁模型的基础上建立了圆形定压边界、两层越流油藏单层开采时的渗流数学模型。通过拉氏变换得到了拉氏空间中以Bessel函数表示的精确解。数值反演计算结果表明，单层开采的两层油藏与全部打开的两层油藏的压力动态基本相同，都表现为3个阶段：早期是介于两个渗透层之间的均质流动；中间为过渡段，导数曲线出现下凹特征；晚期表现为整个油藏的均质特征。随着边界距离的增加，压力导数值趋近于0．5。半透率越大过渡段出现得越早。导数曲线下凹程度越小；储容比越大导数曲线峰值越小，导数曲线下凹程度越小；随着两层渗透率比值变小。过渡段变短，导数曲线下凹程度变小。图1参9     

稀土改善09CuPTiRE耐候钢耐蚀性的作用机理

应用扫描电镜(SEM)、离子探针(IMA)、X射线光电子能谱(XPS)和交流阻抗法研究含不同稀土耐候钢稀土提高耐大气腐蚀作用机理。结果表明,合适的稀土含量可显著提高钢的耐腐蚀性,稀土能促进Si、Cu和P在内锈层中以Si~(4+)、Cu~+和P~(5+)形态富集,并观察到锈层中的稀土。钢中加入稀土形成了致密连续厚而粘附性好的含硅铜稀土的复合铁锈层,从而提高了抗大气腐蚀性能。