Large area CIGS2 thin film solar cells on foils: nucleus of a pilot plant

In earlier research, conversion efficiency of 10.4% (AM1.5) and 9.9% (AM0) has been achieved on small area CuIn_xGa_1−xS₂ (CIGS2) solar cell on 127 μm thick stainless steel substrate. The area of research is mainly focused on studying CIGS2 thin films as solar cell absorber material and growing high efficiency cells on ultralightweight and flexible metallic foils such as 127 μm thick stainless steel and SiO₂ coated 25 μm thick Ti foils. This paper presents the scaling up process of CIGS2 thin film substrate from 2.5 × 2.5 cm² to 10 × 10 cm². Initial scaling up efforts focused on achieving uniform thickness and stress-free films. Process of scaling up consisted of refurbishment of selenization/sulfurization furnace, design and fabrication of scrubber and enlargement of new CdS deposition setup. The scaling up from 2.5 × 2.5 cm² to 10 × 10 cm² substrate size has laid the foundation for PV Materials Lab of Florida Solar Energy Center becoming the nucleus of a pilot plant.     

A review on current trends in potential use of metal-organic framework for hydrogen storage

Hydrogen can be a promising clean energy carrier for the replenishment of non-renewable fossil fuels. The set back of hydrogen as an alternative fuel is due to its difficulties in feasible storage and safety concerns. Current hydrogen adsorption technologies, such as cryo-compressed and liquefied storage, are costly for practical applications. Metal-organic frameworks (MOFs) are crystalline materials that have structural versatility, high porosity and surface area, which can adsorb hydrogen efficiently. Hydrogen is adsorbed by physisorption on the MOFs through weak van der Waals force of attraction which can be easily desorbed by applying suitable heat or pressure. The strategies to improve the MOFs surface area, hydrogen uptake capacities and parameters affecting them are studied. Hydrogen spill over mechanism is found to provide high-density storage when compared to other mechanisms. MOFs can be used as proton exchange membranes to convert the stored hydrogen into electricity and can be used as electrodes for the fuel cells. In this review, we addressed the key strategies that could improve hydrogen storage properties for utilizing hydrogen as fuel and opportunities for further growth to meet energy demands.     

Composite polymeric microsponge-based long-acting gel formulation for topical delivery of mupirocin

Topical delivery of medicaments in a controlled manner is still a promising area of research. Drug-containing dammar gum-ethyl cellulose composite microsponge loaded gel formulation (D-MSPG) was developed for controlled topical delivery of mupirocin. The drug-loaded microsponges (D-MSPs) were formulated by the quasi-emulsion solvent diffusion method and were evaluated for morphology, particle size distribution, entrapment efficiency, thermal properties, and crystallinity. The optimized D-MSPs (entrapment efficiency 91.5 ± 4.0% and particle size of 55.15 ± 2.9 μm) were dispersed in carbopol 934 gel (D-MSPG). The final product was characterized for pH, viscosity, texture, spreadability, consistency, syneresis, in vitro drug release, and ex vivo skin penetration study. A comparative study with marketed formulation was performed. For optimized gel formulation (G4), drug content was 104.19 ± 1.68%, and drug release was 84.19% after 24 h. The pH of the optimized gel was observed to be 6.05 ± 0.04. Viscosity of the optimized gel formulation was found to be 1212.15 ± 434.85 mPa-s at 50 s⁻¹. The steady-state flux (J) in ex vivo skin permeation was observed to be 53.96 μg cm⁻² h⁻¹ and the permeability coefficient was 2.69 cm/h for the optimized gel formulation. According to the findings, the D-MSPG-based formulation strategy can act well to prolong the topical delivery of mupirocin or similar drug molecules.     

MICROBIOLOGICAL PROFILE OF MURCHA STARTERS AND PHYSICO-CHEMICAL CHARACTERISTICS OF POKO, A RICE BASED TRADITIONAL FERMENTED FOOD PRODUCT OF NEPAL

Poko is a traditional rice based fermented food of Nepal prepared using murcha as the starter. The microbiological evaluation of eleven murcha starters showed that the lactic acid bacteria and yeast were dominant at 5×10⁵ to 1.0×10⁹ cfu g^-1 range while fungi were present at 2×10⁵ to 1.0×10⁷ cfu g^-1. Coliforms (1×10² to 1.4×10⁵ cfu g^-1), E. coli (1×10³ cfu g^-1), and. S. aureus (1×10² g^-1) were present in some of the murcha starters. Bacillus cereus was absent in all the starters. The microbial succession during poko fermentation suggested that it was primarily a mixed fermentation of yeasts, molds and lactic acid bacteria. The quality poko product obtained after two days and three days of fermentation at 30°C had a pH, acidity, reducing sugar, total sugar, and alcohol in the range of 3.2-3.0, 1.1-1.3 (% LA), 14.4-15.6 (%), 14.6-18.2 (%) and 1-1.6 (%) respectively. These critical ranges of biochemicals in the poko, due to the fermentation process imparted desirable organoleptic characteristics to the product. Saccharomyces cerevisiae, Candida versatilis, Lactobacillus spp, Pediococcus spp and Rhizopus spp were the dominant microorganisms identified from the poko fermentation. The results suggest that the quality of poko depends upon the microbial flora of the traditional murcha starters.     

Placement and routing in 3D integrated circuits

Three-dimension technologies offer great promise in providing improvements in the overall circuit performance. Physical design plays a major role in the ability to exploit the flexibilities offered in the third dimension, and this article gives an overview of placement and routing methods for FPGA- and ASIC-style designs. We describe CAD techniques for placement and routing in 3D ICs, developed under our 3D analysis and design optimization framework. These approaches address a dichotomy of design styles, both FPGA and ASIC. The factors that are important in each style are different, so that a one-size-fits-all approach is impractical, and therefore, we present separate approaches for 3D physical design for each of these technologies. Hence, our FPGA placement method uses a two-step optimization process that minimizes inter-tier vias first, followed by further optimization within and across tiers. In contrast, the ASIC flow uses cost function weighting to discourage, but not minimize, inter-tier crossings.     

Comparative studies on electronic transport due to the reduced dimensionality at the heterojunctions of GaAs/A1xGa(1−x)As and GaxIn(1−x)As/InP systems at low temperatures

Comparative studies on ac/dc mobility due to the reduced dimensionality of spatially confined low dimensional systems, at the heterojunctions of GaAs/A1_xGa_(1−x)As and Ga_xIn_(1−x)As/InP forming quasi-two dimensional (Q2D) and quasi-one dimensional (Q1D) systems have been made. The effect of various low temperature nonphonon scattering mechanisms such as ionized impurity, alloy disorder scattering and surface roughness scattering mechanisms; and phonon scattering mechanisms such as acoustic phonon via deformation potential and piezoelectric scattering mechanisms on the systems has been studied. It is found that the surface roughness scattering mechanism dominates in Q2D system whereas acoustic phonon scattering mechanism dominates in Q1D system due to which the nature and magnitude of the temperature dependent dc/ac mobility curves shows significant variation. Whereas, it is observed that the confinement does not change the nature of the frequency dependent real and imaginary parts of ac mobility curves. However, the mobility is found to be enhanced with effective mass and also due to the confinement, i.e. the mobility for Q1D system is higher than that for Q2D system.     

Enhancing power engineering education through the use of designmodules

This paper describes the main features of four design modules that form part of the curriculum for the final year power engineering students at the Nanyang Technological University, Singapore. Through the use of these modules, the students gain an insight into the various aspects of power engineering-including power electronics and drives-and this will hopefully help them in a better understanding of the practical aspects of power engineering, and therefore make them better engineers in the power industry. The four modules described are Generating Capacity Expansion Planning, Rectifier and DC Motor Control, Power Systems Operations Planning, and Security Enhancement using Optimal Power Flow     

Switching characteristics of an optically controlled GaAs-MESFET

The switching characteristics of an optically controlled Metal Semiconductor Field Effect Transistor (MESFET), popularly known as Optical Field Effect Transistor (OPFET), have been derived analytically. The limitations of the existing model have been overcome in the present model. Calculations are being carried out to examine the effect of illumination on the current-voltage characteristics, drain-to-source capacitance (C_dc), internal gate-to-source capacitance (C_gs), drain-to-source resistance (R_ds), the transconductance (g_m), the input RC time constant and the cutoff frequency (f_T) of a GaAs-MESFET. The variations of these parameters with gate length L_g and the doping concentration N_d have also been studied in dark and illuminated conditions. The results of numerical calculations show that there is an overall decrease in the input RC time constant of the device in the illuminated condition arising from the internal gate-to-source capacitance and the transconductance. The results obtained on the basis of the model show a close agreement with the reported experimental findings. The simple model presented here is fairly accurate and can be used as a basic tool for circuit simulation purposes     

Ancylostoma duodenale is responsible for hookworm infections among pregnant women in the rural plains of Nepal

PURPOSE: To evaluate retrospectively the optimum dosage of irradiation for Kimura's disease. METHODS AND MATERIALS: Twenty patients with Kimura's disease were treated with radiotherapy. The sex ratio was 19 males to 1 female. The mean ages at onset, initial treatment, and radiotherapy were 26.2, 29.5, and 32.2 years, respectively. Radiotherapy was mainly applied for residual or recurrent tumors. The eosinophil count increased by more than 10% in 18 of the 20 patients. In most instances, irradiation was given through a single field with dosages ranging from 20 to 44 Gy. RESULTS: At the completion of radiotherapy, a marked response in tumor size was noted in all cases. The minimum follow-up was 48 months. Local control was obtained in 23 of 31 lesions (74.1%). At dosages of < or =25 Gy, 26-30 Gy, and > 30 Gy, local control was obtained in 2 of 8 (25.0%), 9 of 10 (90.0%), and 12 of 13 sites (92.3%), respectively. CONCLUSIONS: Radiotherapy is an effective treatment for Kimura's disease. This strongly suggests that no surgical procedure other than a biopsy should be carried out. The radiation field should be limited to the lesion and swelling of the adjacent lymph nodes as much as possible, with a optimum dosage of 26-30 Gy regardless of tumor size.