The effect of different knitted fabrics’ structures on the moisture transport properties

In this study, fabrics with different plain, tuck and float stitch combinations in three different tightness levels as tight, medium and loose are produced from combed ring spun cotton yarn. It is aimed at determining the effect of fabric structure on liquid absorption, transport and permeability properties, which are important factors in the people’s perception of wear comfort. The air permeability, wicking ability and moisture management measurements of the produced fabrics are made. It is determined that the increase in the fabric tightness decreases the air permeability and increases the wicking ability especially in 60?min measurements. The fabric tightness has also different effects on different knitting types in terms of moisture management properties. It is observed that structures with float stitches show high wicking ability and moisture management properties in terms of plain, tuck and float stitches combinations.     

Investigation of pore parameters of woven fabrics by theoretical and image analysis methods

Fluid permeability property is an important performance feature of fabrics and must be considered during the designing processes of products. Since the rate of fluid flow through a textile is a function of viscosity, density, pressure gradient of fluid, and the pore properties of fabric, it is necessary to define pore properties by controlling the structural parameters of fabric for a certain area of use. Due to the complexity of fabric structure, modeling of pore structure and predicting the pore parameters are difficult. In this study, the interyarn porosity, pore size, and pore-size distribution of cotton woven fabrics were calculated by using two-dimensional (2D) and three-dimensional (3D) geometrical pore models and image analysis method. The effect of weave types and weft settings on the pore parameters and air permeability of fabrics were investigated, and the advantages of 2D, 3D geometrical pore models and image analysis method were compared.     

Auction-Based Throughput Maximization in Cognitive Radio Networks Under Interference Constraint

Cognitive radio is an emerging technique to improve the utilization of radio frequency spectrum in wireless communication networks. That is, spectrum efficiency can be increased significantly by giving opportunistic access of the frequency bands to a group of cognitive users to whom the band has not been licensed. In this paper, as a cross layer application (MAC and physical layers) of graph theory, we consider the problem of throughput maximization of spectrum allocation in cognitive radio networks under interference constraint. We propose a novel auction-based channel allocation mechanism which tries to maximize both total and primary users’ utilities while satisfying signal to interference ratio constraint on primary receivers so that transmitted packets will be successfully received, without controlling secondary user powers. For comparison we discuss a greedy algorithm as well, however, one that does not handle interference issue. In order to compare results of proposed and greedy algorithms, we propose net throughput by taking into account outage probability of primary receiver. Simulation results show that exposing higher SINR (outage) threshold not only decreases total gain and primary users’ utilities but also worsens channel distribution performance. On the other hand adding auction mechanism significantly increases total gain throughput and primary user’ s utility. Particularly, up to SINR threshold values of 20 dBs, auction provides outstanding performance and proposed algorithm has total throughput results close to those of the greedy one even though no interference constraint is applied in the greedy algorithm. Another noticeable point of simulation results is crossover of net throughputs of proposed and greedy algorithms at a SINR threshold level after which results of ABSA-UNIC and NASA-UNIC are much better. This clearly shows superiority of proposed mechanism.     

Effect of protrusion at the ends of bondline in single lap joints under tension and bending

In this work, elasto-plastic stress analysis of single lap joints with and without protrusion in adhesive bondline subjected to tension and bending was carried out using 2D non-linear finite element analysis and confirmed experimentally. AA 2024-T3 aluminum adherends were bonded with SBT 9244 film adhesive. The protrusion was obtained by extending the adhesive film by 2?mm from the overlap length at both overlap ends. Three different adherend thicknesses and overlap lengths for each loading and bondline type were used. The joints with and without protrusion, for comparison, were loaded with the same load for each adherend thickness and overlap length. Finally, it was observed that the protrusion reduces the strength in the joint under tension, while the protrusion increases the strength in the joint under bending.     

Some numerical studies of interface advection properties of level set method

In this paper, we discuss the results of a series of tests carried out to assess the level set methodology for capturing interfaces between two immiscible fluids. The tests are designed to investigate the accuracy of convection process, the preservation of interface shape, and the mass conservation properties of individual fluids. These test cases involve the advection of interfaces of different shapes exposed to translation, rotation, deformation, and shear flow. Prescribed solenoidal velocity fields are used and no attempt is made to couple the advection of the level set function with the momentum equations. For the solution of level set equation we have employed first-order upwind scheme, MacCormack method, second-order ENO scheme, and fifth-order WENO scheme. Our studies show that the level set method perform well when higher-order schemes are used for the solution of advection equation. However, for certain type of shearing and vortical velocity fields mass conservation is an issue on coarser meshes even with higher order schemes. Finer mesh must be used in such situations to reduce numerical diffusion.     

Risk assessment of combined photogenotoxic effects of sunlight and food additives

The presence of flavored colorants (peach and raspberry), flavors (caramel, citric acid and vanilla) and food preservatives (sodium nitrite, sodium nitrate, sodium benzoate, benzoic acid, potassium sorbate and sodium chloride) in Escherichia coli suspension during exposure to sunlight did not change the extent of cell survival. No effect on viability and mutation induction (kanamycin resistant) was also seen when cells were kept in contact with any of the additives for 80 min in the dark. However, when the relevant additive was present in cell suspension during sunlight exposure the number of induced mutations was increased to varying extents over that seen with sunlight alone. Raspberry and peach increased the number of mutations in a dose dependent manner, while vanilla produced mutations in an additive fashion. Nitrite, nitrate, benzoate, sorbate and benzoic acid increased mutation somewhat additively over that of sunlight. Sodium chloride and citric acid were not effective. The impact of this investigation reflects the significance of combination of sunlight and chemical food additives as potential risk, which requires special attention and necessitates further investigations to evaluate the risk.     

A new metal chelate sorbent for glucose oxidase: Cu(II)- and Co(II)-chelated poly(N-vinylimidazole) gels

Poly(N-vinylimidazole) (PVIm) gels were prepared by irradiating a binary mixture of N-vinylimidazole (VIm)–water in a ⁶⁰Co-γ source having 4.5 kGy/h dose rate. In the glucose oxidase (GOx) adsorption studies, affinity gels with a swelling ratio of 1100% for PVIm and 40 and 55% for Cu(II)- and Co(II)-chelated PVIm gels, respectively, at pH 6.5 in phosphate buffer were used. FTIR spectra were taken for PVIm and Cu(II)- and Co(II)-chelated PVIm, and glucose oxidase adsorption on these gels, to characterize the nature of the interactions in each species. The results show that PVIm–glucose oxidase interaction is mainly electrostatic and metal ion–chelated PVIm gel–glucose oxidase interaction is of coordinate covalent nature. Cu(II) and Co(II) ions were chelated within the gels via amine groups on the imidazole ring of the gel. Different amounts of Cu(II) and Co(II) ions [maximum 3.64 mmol/g dry gel for Cu(II) and 1.72 mmol/g dry gel for Co(II)] were loaded on the gels by changing the initial concentration of Cu(II) and Co(II) ions at pH 7.0. GOx adsorption on these gels from aqueous solutions containing different amounts of GOx at different pH was investigated in batch reactors. GOx adsorption capacity was further increased when Cu(II) and Co(II) ions were attached [up to 0.53 g GOx/g dry Co(II)-chelated PVIm gels]. More than 90% of the adsorbed GOx was desorbed in 5 h in desorption medium containing 1.0M KSCN at pH 7.0 for plain gel and 0.05M EDTA at pH 4.9 for metal-chelated gel. Nonspecific glucose oxidase adsorption on/in the metal ion–chelated PVIm gel was investigated using 0.02M of phosphate buffer solution. The nonspecific GOx adsorption was determined to be about 18% for PVIm and 8% for the metal ion–chelated PVIm gels. The ionic strength effect was investigated both on PVIm and on the metal ion–chelated PVIm gels for the glucose oxidase adsorption. It was found that ionic strength was more effective on the PVIm gel because of the electrostatic interaction between protonated gel and the deprotonated glucose oxidase side chain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 446–453, 2001     

Pivotal Role of Phytohormones and Their Responsive Genes in Plant Growth and Their Signaling and Transduction Pathway under Salt Stress in Cotton

The presence of phyto-hormones in plants at relatively low concentrations plays an indispensable role in regulating crop growth and yield. Salt stress is one of the major abiotic stresses limiting cotton production. It has been reported that exogenous phyto-hormones are involved in various plant defense systems against salt stress. Recently, different studies revealed the pivotal performance of hormones in regulating cotton growth and yield. However, a comprehensive understanding of these exogenous hormones, which regulate cotton growth and yield under salt stress, is lacking. In this review, we focused on new advances in elucidating the roles of exogenous hormones (gibberellin (GA) and salicylic acid (SA)) and their signaling and transduction pathways and the cross-talk between GA and SA in regulating crop growth and development under salt stress. In this review, we not only focused on the role of phyto-hormones but also identified the roles of GA and SA responsive genes to salt stress. Our aim is to provide a comprehensive review of the performance of GA and SA and their responsive genes under salt stress, assisting in the further elucidation of the mechanism that plant hormones use to regulate growth and yield under salt stress.     

The growth of chondrocytes using Gelfoam® as a biodegradable scaffold

Successful articular cartilage resurfacing must overcome several problems: the implant must easily fit the defect, it must be stable within the defect before full incorporation of repair tissue has occurred, and the reparative tissue must closely approximate the structure of normal hyaline cartilage. To this end, several natural and synthetic components have been used, both in vivo and in vitro, to provide a scaffold. These include isolated chondrocyte allografts, intact cartilage allografts, periossteal grafts, reconstructed collagen sponges, hydrogels and carbon fibres. However, promising results have been reported using three dimensional scaffolds in culture with isolated chondrocytes with subsequent implantation. This preliminary in vitro study utilizes Gelfoam^® (a purified gelatin sponge) as such a scaffold. The biocompatibility of Gelfoam with both chondrocytes and osteoblast cells was first confirmed. The ability of chondrocytes to replicate and differentiate within Gelfoam scaffolds was assessed biochemically by measurement of the DNA content and glycosaminoglycans (GAG) production over 25 days in culture. The distribution of the cartilagenous matrix produced was observed by light microscopy, and the constituents of this matrix were assessed using specific antibodies and immunolocalization.