Physiological and psychophysical responses in handling maximum acceptable weights under different footwear--floor friction conditions

A study on combined manual materials-handling tasks performed on floors under three friction levels was conducted. Eight male subjects participated in the study. The maximum acceptable weight of handling, including lifting, carrying for 3m, lowering, and walking 3m back at twice per minute was determined. The subject then performed the same tasks for 10 min. Heart rate, Vo2, energy efficiency, perceived sense of slip, and rating of perceived exertion for whole body strain were measured. The results showed that the effects of friction level on the maximum acceptable weights of handling, perceived sense of slip, Vo2, and energy efficiency were statistically significant (p相似文献   

WWW上路径模式发掘的研究

本文从互连网发展的趋势入手,对路径模式发掘进行了研究。先简要介绍数据库发掘的概况及网上数据发掘的特点,后结合关联法和组合概率法,并以算法和实例详细对之进行分析。     

Scalable parallel data mining for association rules

The authors propose two new parallel formulations of the Apriori algorithm (R. Agrawal and R. Srikant, 1994) that is used for computing association rules. These new formulations, IDD and HD, address the shortcomings of two previously proposed parallel formulations CD and DD. Unlike the CD algorithm, the IDD algorithm partitions the candidate set intelligently among processors to efficiently parallelize the step of building the hash tree. The IDD algorithm also eliminates the redundant work inherent in DD, and requires substantially smaller communication overhead than DD. But IDD suffers from the added cost due to communication of transactions among processors. HD is a hybrid algorithm that combines the advantages of CD and DD. Experimental results on a 128-processor Cray T3E show that HD scales just as well as the CD algorithm with respect to the number of transactions, and scales as well as IDD with respect to increasing candidate set size     

纳米SiO2材料的应用

本文根据纳米的奇异特性,简要综述纳米ＳｉＯ２在各个领域中的应用。     

移动台车栏板辅助浇筑系统的设计与应用

蒲石河工程下水库大坝顶部混凝土护栏位于坝顶临空边沿,钢筋绑扎和模板支立作业难度大,施工时存在安全隐患。为此,蒲石河工程设计了移动台车栏板辅助浇筑系统并成功应用。实践表明,作业台车设计可靠、安全稳定、操作简便、定位准确、移动方便,保障了施工人员人身安全,节约了成本,加快了工期,提高了模板支立质量,值得类似工程借鉴并推广使用。     

Producing persistent, high-current, high-duty-factor H- beams for routine 1 MW operation of Spallation Neutron Source (invited)

Since 2009, the Spallation Neutron Source (SNS) has been producing neutrons with ion beam powers near 1 MW, which requires the extraction of ～50 mA H(-) ions from the ion source with a ～5% duty factor. The 50 mA are achieved after an initial dose of ～3 mg of Cs and heating the Cs collar to ～170 °C. The 50 mA normally persist for the entire 4-week source service cycles. Fundamental processes are reviewed to elucidate the persistence of the SNS H(-) beams without a steady feed of Cs and why the Cs collar temperature may have to be kept near 170 °C.     

Robust tracking control of an array of nanoparticles moving on a substrate

Control of nanosystems with frictional dynamics using feedback control methods is important to a wide range of applications of nanotribology. This paper studies the tracking control problem of an array of nanoparticles moving on a substrate with friction between the substrate and the particles. The focus of this study is on control design and stability analysis. The major challenges in this problem include nonlinearities and uncertainties in the frictional dynamics and limited availability of measurable states in nanosystems. The particle–substrate interaction is considered to be unknown, and the unknown effect of unmodeled particle dynamics on the dynamics of the center of mass of the array is also considered. A nonlinear identifier is first developed to identify these unmodeled dynamics. A feedback controller is then developed based on the identifier to control the center of mass of the particles to track a desired trajectory. Boundedness of the closed-loop states and semiglobal asymptotic stability of the tracking error are proven using Lyapunov theory for the case of linear inter-particle interactions. An example with more general Morse-type inter-particle interactions is included to provide some level of confidence that the results are general but not assuredness that they are. Numerical simulation results are provided to demonstrate the performance of the developed identification and control law.     

Microwave permeability of single cobalt nanotube studied by micromagnetics simulations and generalized Snoek’s law

Microwave permeability spectra of single Co nanotube under equilibrium state have been studied by micromagnetics simulation.More than four obvious resonance peaks have been found(11.72,24.20,33.18 and 39.55 GHz).Such large resonance frequency cannot be found in other traditional magnetic materials.The configurations of magnetic moments along the nanotube have been simulated.The results show that the top end of nanotube has a"flow-out"pattern of magnetic moments configuration.The bottom end has a"flow-in"pattern of magnetic moments configuration.The magnetic moments within the main body of nanotube are aligned perfectly along the length of nanotube.The magnitude of natural resonance peak is strongly related to the volume fraction of a zone,which has the same orientation of magnetic moments.Large microwave permeability values have been found for single nanotube.The generalized Snoek’s law has been used to validate the micromagnetics simulations in this paper.     

Mode III fracture of a magnetoelectroelastic layer: exact solution and discussion of the crack face electromagnetic boundary conditions

This paper develops a closed-form solution for anti-plane mechanical and in plane electric and magnetic fields in a magnetoelectroelastic layer of finite thickness. Explicit expressions for the stresses, electric fields, and magnetic fields, together with their intensity factors are obtained for the extreme cases for impermeable and permeable cracks. Solutions for some special cases, such as a magnetoelectroelastic layer with infinite thickness, are also obtained. Applicability of the crack face electromagnetic boundary conditions is discussed. It is found that the crack profile is important in obtaining the correct electromagnetic fields and their intensity factors. The stress intensity factor, however, does not depend on the crack face electromagnetic boundary condition assumptions.