Application of modern online instrumentation for chemical analysis of gas and particulate phases of exhaust at the European Commission heavy-duty vehicle emission laboratory

The European Commission recently established a novel test facility for heavy-duty vehicles to enhance more sustainable transport. The facility enables the study of energy efficiency of various fuels/scenarios as well as the chemical composition of evolved exhaust emissions. Sophisticated instrumentation for real-time analysis of the gas and particulate phases of exhaust has been implemented. Thereby, gas-phase characterization was carried out by a Fourier transform infrared spectrometer (FT-IR; carbonyls, nitrogen-containing species, small hydrocarbons) and a resonance-enhanced multiphoton ionization time-of-flight mass spectrometer (REMPI-TOFMS; monocyclic and polycyclic aromatic hydrocarbons). For analysis of the particulate phase, a high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS; organic matter, chloride, nitrate), a condensation particle counter (CPC; particle number), and a multiangle absorption photometer (MAAP; black carbon) were applied. In this paper, the first application of the new facility in combination with the described instruments is presented, whereby a medium-size truck was investigated by applying different driving cycles. The goal was simultaneous chemical characterization of a great variety of gaseous compounds and particulate matter in exhaust on a real-time basis. The time-resolved data allowed new approaches to view the results; for example, emission factors were normalized to time-resolved consumption of fuel and were related to emission factors evolved during high speeds. Compounds could be identified that followed the fuel consumption, others showed very different behavior. In particular, engine cold start, engine ignition (unburned fuel), and high-speed events resulted in unique emission patterns.     

Synthesis and structure analysis of La0.5SR0.5TiO3 nanoparticles prepared by thermal decomposition method

La0.5Sr0.5TiO3 (LSTO) nanoparticles were synthesized by thermal decomposition method using Cl3La, CI2Sr x 6H2O and C16H28O6Ti as starting materials. The obtained precursor in a powder form was calcined at 700, 900, 1100 and 1300 degrees C for 3, 6 and 9 h in air. The structures of all samples were analyzed by XRD and some of them were taken for SEM, TEM and VSM measurements. The results from SEM showed the parallelpipe like shape of the particles with sizes distributed between 80 and 180 nm and the sizes of these particles were increased with the increasing of calcination temperature and time. The XRD's results showed the perovskite structure with the lattice type of orthorhombic at the calcination temperature of 900, 1100 and 1300 degrees C for 3, 6 and 9 h. The TiO and others unknown phase were found at low calcination temperature and they were disappeared as the calcination temperature and time were increased. The results of TEM support the orthorhombic structure of LSTO nanoparticles with crystallite size less than 200 nm as revealed by SEM and XRD. The magnetic property of all samples was measured by VSM and revealed that those prepared at 700, 900, and 1100 degrees C exhibit diamagnetic behavior, whereas one at 1300 shows ferromagnetism at room temperature. In this work, it is found that the nano-LSTO of high crystalline phase and purity can be prepared by thermal decomposition method at calcination temperature of 900 to 1300 degrees C in air for 6-9 h.     

Fabrication and Magnetic Properties of Electrospun La0.7Sr0.3MnO3 Nanostructures

La_0.7Sr_0.3MnO₃ (abbreviated as LSMO) nanostructures were fabricated by a simple electrospinning using a solution that contained poly(vinylpyrrolidone) (PVP), lanthanum, strontium and manganese nitrates. The LSMO nanostructures were successfully obtained from calcination of the as-spun LSMO/PVP composite nanofibers at 500–900 °C in air for 7 h. The as-spun and calcined LSMO/PVP composite nanofibers were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Analysis of phase composition by XRD revealed that all the calcined samples have a single rhombohedral LSMO phase. The SEM results showed that the crystal structure and morphology of the LSMO nanofibers were affected by the calcination temperature. Crystallite size of the nanoparticles contained in nanofibers increased with an increase in calcination temperature. The specific saturation magnetization (M _s ) values were obtained to be 1.23, 28.61, and 40.52 emu/g at 10 kOe for the LSMO samples calcined respectively at 500, 700, and 900 °C. It is found that the increase of the tendency of M _s is consistent with the enhancement of crystallinity, and the values of M _s for the calcined LSMO samples were observed to increase with increasing crystallite size. This increase in M _s for the calcined LSMO samples with increasing crystallite size may be explained by considering a magnetic domain of the samples.     

A multifrequency algorithm for the retrieval of soil moisture on alarge scale using microwave data from SMMR and SSM/I satellites

The sensitivity of microwave emission at different frequencies to soil moisture in bare and vegetated soils has been investigated using experimental data. Since the best frequency for the measurement of soil moisture (L-band) is absent in current satellite sensors, it is necessary to seek alternative solutions. An algorithm is proposed for the retrieval of soil moisture based on the sensitivity to moisture of both the brightness temperature and the polarization index at C-band, one that is able to correct for the effect of vegetation by means of the polarization index at X-band. The algorithm has been tested by using experimental data collected with airborne microwave radiometers on agricultural areas and validated by using the data sets of special sensor microwave/imager (SMM/I) and scanning multichannel microwave radiometer (SMMR). These research activities are planned in view of coming new satellites: AQUA (NASA) and ADEOS-II (NASDA), which will be launched by the end of 2001. These will have new generation microwave radiometers (AMSR-E and AMSR) onboard, which show much better characteristics with respect to the previous sensors, in particular an enhanced spatial resolution     

The trial spacing effect in delayed matching-to-sample by pigeons is dependent upon the illumination condition during the intertrial interval.

Two experiments examined the effects of chamber illumination during the intertrial interval (ITI) of delayed matching-to-sample by 8 White Carneaux pigeons. Exp I demonstrated that accurate choice of the matching stimulus was disrupted by illumination at long ITIs but not short ITIs. This effect was obtained regardless of the ITI illumination condition during training. The disruption produced by long illuminated ITIs was constant across delay intervals. A strong direct linear relationship between matching accuracy and the log ITI/delay ratio was obtained when the ITI was dark but not when it was illuminated. In Exp II, ITI illumination was more disruptive when it occurred at the end rather than at the beginning of the ITI. Results support the view that trial spacing effects are not due to competing memories from previous trials. A change in ITI illumination may disrupt encoding of the sample stimulus and offset the beneficial effects of trial spacing. (French abstract) (23 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hashimoto''s thyroiditis and HLA in Caucasian Italians

Sudden infant death syndrome is the sudden, unexpected death of an apparently healthy infant, accounting for 7,000 to 10,000 deaths per year. For the parents, the unexpectedness and guilt can be overwhelming. The long, difficult grief process has a great effect on marital relationships, surviving siblings, and subsequent children. Increasing the nurse's understanding of the effects of sudden infant death syndrome can enhance the support the parents receive. A caring attitude and follow-up throughout the grief process are necessary.     

Intestinal angiodysplasia: diagnosis and therapy

On the basis of two personal cases of angiodysplasia authors describe this rare pathology and its relative diagnostic difficulties. On the grounds of their experience and the international literature on this pathology, authors considered the angiography as the selected method for the diagnosis of intestinal angiodysplasia, and they consider surgical therapy as the best curative method for this pathology.     

Destruction-Free Parameter Extraction for a Physics-Based Circuit Simulator IGCT Model

This paper presents a practical destruction-free parameter-extraction methodology for a new physics-based circuit simulator buffer-layer integrated gate-commutated thyristor (IGCT) model. Most key parameters needed for this model can be extracted by one simple clamped inductive-load switching experiment. To validate this extraction method, a clamped inductive-load switching experiment was performed, and corresponding simulations were carried out by employing the IGCT model with parameters extracted through the presented methodology. Good agreement has been obtained between the experimental data and simulation results