Vapor phase synthesis of ZnO structures

We observed zinc oxide structures formed in an oxygen-containing atmosphere as a result of oxidation of the surface of zinc droplets. The gas-phase oxidation leads to the formation of hollow ZnO whiskers on the metal surface, which grow due to the transport of zinc vapor through their channels. It was found that high partial pressures of zinc and atomic oxygen give rise to fractal structures, which appear in a cascade process involving the sequential formation of zinc oxide vapor, ZnO clusters, and cluster aggregates as a result of the cluster-cluster interaction. A deposit of ZnO synthesized on the cathode surface exhibits a columnar structure.     

The geometric nature of plasticity laws

This paper concerns the plasticity constitutive laws in small strain. In the thermodynamic approach developed here, the key concept is that of internal variables. The differential nature of plasticity law has been pointed out for a long time. If we unite the invariance condition of these laws in a state variable transformation, this involves, ultimately, that the natural mathematic frame of plasticity theory is Differential Geometry. The system state is defined as a point of a differentiable manifold. The state variable are the local coordinates of this point in a chart. The internal stresses are the components of a covariant vector of the cotangent bundle to internal state manifold and the elastic domain is a convex part of cotangent vector space. The plastic yield criteria such as von Mises condition define a Riemannian structure over the manifold. The metric element is identified with the internal dissipation element. Constitutive laws link the covariant derivatives of the thermodynamic stress with the state variable. Hardening modulus splits up in two parts, kinematic hardening and metric hardening. This last is defined by Christoffel connection coefficients. Applied to von Mises isotropic yield condition, the metric hardening is identified with isotropic hardening. The Baltov-Sawczuk model is also analysed. The use of appropriate polar coordinates simplifies significantly the computations. Generalization to a significant category of non-differentiable yield criteria, such as Tresca condition, is considered by introducting a metric tensor family. The adaptation of Drucker's postulate to the proposed model requires the introduction of parallel transport of the internal stress covector. Generally, this transport is different over distinctive paths joining two points. This fact expresses internal state manifold curvature. The Riemann-Christoffel tensor is computed for von Mises, Baltov-Sawczuk and Tresca models.     

Compile-time partitioning of iterative parallel loops to reducecache coherency traffic

Adaptive data partitioning (ADP) which reduces the execution time of parallel programs by reducing interprocessor communication for iterative parallel loops is discussed. It is shown that ADP can be integrated into a communication-reducing back end for existing parallelizing compilers or as part of a machine-specific partitioner for parallel programs. A multiprocessor model to analyze program execution factors that lead to interprocessor communication and a model for the iterative parallel loop to quantify communication patterns within a program are defined. A vector notation is chosen to quantify communication across a global data set. Communication parameters are computed by examining the indexes of array accesses and are adjusted to reflect the underlying system architecture by compensating for cache line sizes. These values are used to generate rectangular and hexagonal partitions that reduce interprocessor communication     

Analog regulators of the energy-liberation distribution in nuclear reactors

Translated from Atomnaya Énergiya, Vol. 66, No. 2, pp. 81–85, February, 1989.     

Wideband miniature G-shaped antenna for dual-band WLAN applications

A wideband miniature G-shaped coplanar waveguide fed dual-band antenna for a wireless local area network (WLAN) is proposed. The proposed antenna has good radiation pattern and can provide two separate measured impedance bandwidths of 0.55 GHz (about 22.9% centred at 2.42 GHz) and 2.85 GHz (about 50.9% centred at 5.60 GHz), so that it easily covers the required bandwidths for WLAN operation. This design results in a small antenna size of 22 times 18.5 mm with the ground plane regarded as part of the antenna structure.     

A mathematical model of a single-phase induction motor with an asymmetric stator winding

A model of an induction motor with an asymmetric stator winding is developed; it may be represented as two phases connected in parallel or in series and displaced is space by some angle.     

Modeling Power Supply Noise in Delay Testing

Excessive power supply noise during test can cause overkill. This article discusses two models for supply noise in delay testing and their application to test compaction. The proposed noise models avoid complicated power network analysis, making them much faster than existing power noise analysis tools. can cause performance degradation and     

An analytical model for I-V and small-signalcharacteristics of planar-doped HEMTs

An analytical current-voltage (I-V) model for planar-doped HEMTs is developed. This compact model covers the complete range of I-V characteristics, including the current saturation region and parasitic conduction in the electron-supplying layer. Analytical expressions for the small-signal parameters and current-gain cutoff frequency are derived from the I-V model. Modeling results for a 0.1-μm-gate planar-doped AlInAs-GaInAs HEMT show excellent agreement with measured characteristics. Threshold voltages and parasitic conduction in planar-doped and uniformly doped HEMTs are also compared and discussed     

A 1320 nm experimental optical phase-locked loop

An experimental balanced optical second-order phase-locked loop constructed using 1320 nm diode laser pumped miniature Nd:YAG lasers is discussed. The loop is stable and has a phase error of less than 1.8° when the received signal power is -65 dBm or more. The phase error appears to be dominated by the lasers' frequency noise as long as the signal power is more than -60 dBm     

Organochlorine and Mercury Residues in Young-of-the-Year Spottail Shiners from the Detroit River,Lake St. Clair,and Lake Erie

Young-of-the-year spottail shiners (Notropis hudsonius) were used as biomonitors to determine the spatial distribution (1982/83) and assess trend data for organochlorine and mercury residues. Significantly (p < 0.01) higher PCB residues were found in Detroit River spottail shiners than in collections from southwestern Lake St. Clair and northwestern Lake Erie. The highest PCB residues were found in the west bank collections from Michigan waters (912–2,997ng/g) compared to the mid-stream (96–290 ng/g) and east bank collections (153–316 ng/g). Chlordane residues were found to be elevated in all spottail shiner samples from urbanized areas. Octachlorostyrene and ∑ DDT residues were distributed uniformly within the study area, whereas mercury concentrations were found to be lower in spottail shiners from northwestern Lake Erie than in comparable samples from the Detroit River and southwestern Lake St. Clair. Residues for BHC, heptachlor, aldrin, and chlorinated benzenes were near their detection limits; mirex and chlorinated phenols were not detectable. Recent (1982/83) PCB residue levels in spottail shiners exceeded the IJC aquatic life objective (Great Lakes Water Quality Agreement of 1978) at all the sites sampled, except at Pike Creek in Lake St. Clair. PCB residues in spottail shiners from Pike Creek, Big Creek, and Leamington have declined significantly (p < 0.01) since the mid-seventies. Mercury and chlordane residues have decreased in spottail shiner samples from Leamington, but have remained virtually unchanged at Big Creek and Pike Creek.