熔体增压泵在工程设计选型中需要考虑的几点工况

通过分析涤纶熔体直纺生产现场的常见工况对增压泵驱动功率的影响及其规律,对照多条生产线增压泵运行维护记录,分析了长周期稳定运行的条件和短期出现故障的原因,归纳总结了影响增压泵稳定运行的主要因素,并给出了相应的建议,指出了增压泵上限产量、熔体下限输送温度、纺丝箱体内部的计量泵入口下限压力是设计选型考虑的要点;同时合适的设备选型服务系数也是长周期稳定运行的必要条件。     

Variation in Preen Oil Composition Pertaining to Season,Sex, and Genotype in the Polymorphic White-Throated Sparrow

Evidence for the the ability of birds to detect olfactory signals is now well documented, yet it remains unclear whether birds secrete chemicals that can be used as social cues. A potential source of chemical cues in birds is the secretion from the uropygial gland, or preen gland, which is thought to waterproof, maintain, and protect feathers from ectoparasites. However, it is possible that preen oil also may be used for individual recognition, mate choice, and signalling social/sexual status. If preen oil secretions can be used as socio-olfactory signals, we should be able to identify the volatile components that could make the secretions more detectable, determine the seasonality of these secretions, and determine whether olfactory signals differ among relevant social groups. We examined the seasonal differences in volatile compounds of the preen oil of captive white-throated sparrows, Zonotrichia albicollis. This species is polymorphic and has genetically determined morphs that occur in both sexes. Mating is almost exclusively disassortative with respect to morph, suggesting strong mate choice. By sampling the preen oil from captive birds in breeding and non-breeding conditions, we identified candidate chemical signals that varied according to season, sex, morph, and species. Linear alcohols with a 10–18 carbon chains, as well as methyl ketones and carboxylic acids, were the most abundant volatile compounds. Both the variety and abundances of some of these compounds were different between the sexes and morphs, with one morph secreting more volatile compounds in the non-breeding season than the other. In addition, 12 compounds were seasonally elevated in amount, and were secreted in high amounts in males. Finally, we found that preen oil signatures tended to be species-specific, with white-throated sparrows differing from the closely related Junco in the abundances and/or prevalence of at least three compounds. Our data suggest roles for preen oil secretions and avian olfaction in both non-social as well as social interactions.     

Analogues of perillaketone as highly potent agonists of TRPA1 channel

Transient receptor potential (TRP) channels represent interesting molecular target structures involved in a number of different physiological and pathophysiological systems. In particular, TRPA1 channel is involved in nociception and in sensory perception of many pungent chemesthetic compounds, which are widespread in spices and food plants, including Perilla frutescens. A natural compound from P. frutescens (isoegomaketone) and 16 synthetic derivatives of perillaketone have been prepared and tested in vitro on rTRPA1 expressed in HEK293 cells and their potency, efficacy and desensibilisation activity measured. Most derivatives proved to be high potency agonists of TRPA1, with a potency higher than most natural agonists reported in the literature. These furylketones derivatives, represent a new class of chemical structures active on TRPA1 with many potential applications in the agrifood and pharmaceutical industry.     

Prediction of fatty acids content in pig adipose tissue by near infrared spectroscopy: At-line versus in-situ analysis

A handheld micro-electro-mechanical system (MEMS) based spectrometer working in the near infrared region (NIR) (1600–2400 nm) was evaluated for in-situ and non-destructive prediction of main fatty acids in Iberian pig (IP) carcasses. 110 IP carcasses were measured. Performance of the instrument was compared with at-line high-resolution NIRS monochromators working in two analysis modes: melted fat samples (transflectance cups) and intact adipose tissues (interactance fiber optic). Standard Error of Prediction (SEP) values obtained on the MEMS-NIRS device were: 0.68% (stearic), 1.30% (oleic), 0.55% (linoleic) and 1% (palmitic), explaining a variability of 83%, 84%, 81% and 78%, respectively. As expected, this represented a loss of predictive capability in comparison to at-line models, even with the same spectral characteristics as on the handheld device. However, the estimated total errors were at the same level for gas chromatography and NIRS analysis. This indicates that the MEMS-NIRS in-situ analysis of each individual carcass provides a cost-effective and real-time quality control system with suitable accuracy.     

Application of chemical and physical agents in model systems to controlling phenoloxidase enzymes

Several chemical and physical anti-browning agents are studied in different model systems in which caffeic acid (as substrate) and laccase from Trametes versicolor (LAC) and polyphenoloxidase from sunflower seeds (PPO) (as enzymes) are used to emulate the browning reaction. Temperature and low electric current were the tested physical agents, while acetic acid, sodium acetate, sodium chloride and, finally, sodium bisulfite were the chemical agents. Sunflower PPO was observed to be less heat sensitive than LAC that was fully inactivated after 1 and 3 min of exposure to 100 and 80 °C, respectively. Conversely, PPO required more than 3 min at 100 °C to be fully inactivated, and it still showed a significant activity (ca. 17%) after an exposure to 80 °C for 15 min. Both LAC and PPO were found to be active at frozen (−18 °C) and cool (+4 °C) temperature, and their activities were strengthened at 40 and 60 °C. As concerning chemical agents, inhibitory power of acetic acid on LAC was observed to be very weak. In the sodium acetate solution at the concentrations of 0.5, 1.0, 2.0 and 4.0%, LAC residual activity was equal to 81.5, 63.9, 61.1 and 35.2%, respectively. PPO is shown to be more sensitive to the NaCl than LAC and indifferent to the presence of NaHSO₃. A 28% residual activity of LAC was found in the solution with 200 mg L⁻¹ NaHSO₃. Finally, LAC activity was decreased to 72.3, 60.0, 16.7 and 8.4% after a low electric current (LEC) treatment of 30 s and 1, 3 and 6 min, respectively. Conversely, PPO activity was not affected under these conditions.     

Gasoline permeation resistance of the as‐blow‐molded and annealed polyethylene,polyethylene/polyamide,and polyethylene/modified polyamide bottles

An investigation of the gasoline permeation resistance of the as‐blow‐molded and annealed polyethylene, polyethylene (PE)/polyamide (PA), and polyethylene/modified polyamide (MPA) bottles is reported. The gasoline permeation resistance improves dramatically after blending PA and MPA barrier resins in PE matrices during blow‐molding, and the order of barrier improvement corresponds to the order of barrier improvement of the barrier resins added in PE. Somewhat unexpectedly, the gasoline permeation rates of the annealed PE and/or PE/PA bottles annealed at 90°C or higher temperatures increase significantly with the annealing temperature and time. On the contrary, the gasoline permeation resistance of the annealed PE/MPA bottles increase significantly as the annealing temperature and/or time increase. For instance, the gasoline permeation rate of the PE/MPA bottle annealed at 120°C for 32 h is about 190 times slower than that of the as‐blow‐molded PE bottle. Further investigations found that, after blending the MPA and PA barrier resins in PE matrices, the relatively nonpolar hydrocarbon components present in the gasoline fuels were significantly blocked, without permeation during the permeation tests, in which the as‐blow‐molded PE/MPA bottle inhibited the permeation of hydrocarbon components more successfully than did the as‐blow‐molded PE/PA bottle. In contrast, the amounts of polar components that permeated through the as‐blow‐molded PE/PA and PE/MPA bottles were very small and about the same as the amount that permeated through the as‐blow‐molded PE bottle. Possible mechanisms accounting for these interesting behaviors are proposed in this study. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2827–2837, 2001     

Photopolymerization of hyperbranched aliphatic acrylated poly(amide ester). I. Synthesis and properties

The hyperbranched aliphatic poly(amide ester) (HAPAE) was synthesized based on 4‐N,N‐di(2‐hydroxy ethyl)‐4‐ketobutyric acid prepared by the reaction of succinic anhydride with diethanol amine, as an AB₂ monomer (repeating unit), and with 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol, as a core molecule, using acid catalysis. The second generation of the product was characterized by measuring dynamic viscosity, which decreased sharply with the increase in frequency. The product exhibits relative thermal stability as analyzed by thermogravimetry in a nitrogen atmosphere. The glass transition temperature, determined by differential scanning calorimetry, is ?27 °C. The molar mass was measured by vapor pressure osmometry. The polydispersity, measured by size exclusion chromatography, is 2.16. Dynamic mechanical thermal analyses were performed to characterize the thermal properties of the ultraviolet‐cured films of the acrylate‐modified HAPAE. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1630–1636, 2001     

MINIATURE PULSE TUBE FOR THE COOLING OF ELECTRONIC DEVICES: FUNCTIONING PRINCIPLES AND PRACTICAL MODELING

The miniaturization of refrigerating systems represents a very current scientific and technical challenge to improve the performances of numerous electronic components. This work presents a global approach to the problem and suggests studying the cooling by means of small channels filled with an oscillating gas: the double inlet pulse tube refrigerator (DIPTR). A great level of miniaturization based on the technology of carving silicon is exposed. This study proposes to apply an electric analogy for modeling both hydrodynamic and thermal phenomena. Considering the complexity of the theoretical problem including mechanical, thermal, thermodynamical, and acoustic considerations, the authors take care to summarize the main governing equations in a particular form so any scientific engineer could understand the DIPTR principle.     

Chloride binding isotherm from migration and diffusion tests

Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride binding isotherm. Compared to other methods, chloride binding isotherms obtained directly from nonsteady-state diffusion tests seem closer to the reality. We studied the chloride binding isotherm from both nonsteady-state electrical-accelerated migration and diffusion tests at different temperatures. Twelve concrete mixes with different supplementary cementing materials and water-to-binder ratios of 0.35, 0.48 and 0.6 were cast for study. The specimens after diffusion (or migration) tests were sliced layer by layer, and acid-soluble and free chloride contents of each layer were measured. A chloride binding isotherm was obtained from one specimen. Experimental results indicated that electrical voltage had a slight effect on the chloride binding isotherm of concrete. Temperature had a positive effect on chloride binding. The higher the water-to-binder ratio was, the higher the chloride binding was.