HIGH-TEMPERATURE ISOPIESTIC STUDIES ON Hg-Pb BINARY AMALGAM

用高温等渗法测定了600K时Hg-Pb二元系中Hg的活度,并用Gibbs-Duhem积分计算了该二元汞齐中Pb的活度。     

Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.     

Low-energy ion beam treatment of α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>(0001) and improvement of photoluminescence of ZnO thin films

A low energy N₂ ^? ion beam impinged on a α-Al₂O₃(0001) single crystal surface in the range of fluence 5×10¹⁵/cm²?1×10¹⁸/cm² at room temperature. After ion bombardment, chemical bonding on the modified sapphire surface was investigated by x-ray photoelectron spectroscopy. Below a fluence of 1×10¹⁵/cm², only a non-bonded N1s peak at the binding energy 398.7 eV was found, but further irradiation up to 2×10¹⁷/cm² induced Al?O?N bonding at around 403 eV. The occurrence of Al?N bonding was identified at ion fluence higher than 5×10¹⁷/cm² at 396.6 eV. II–VI ZnO thin films were grown on an untreated/ion-beam-induced sapphire surface by pulsed laser deposition (PLD) for the investigation of the modified-substrate effect on photoluminescence. The ZnO films grown on modified sapphire containing Al?O?N bonding only, and both Al?O?N and Al?N bonding showed a significant reduction of the peak related to deep-level defects in photoluminescence. These results are explained in terms of the formation of Al?N?O and Al?O?N layers and relaxation of the interfacial strain between Al₂O₃ and ZnO.     

Stabilised finite element methods for a bending moment formulation of the Reissner-Mindlin plate model

This work presents new stabilised finite element methods for a bending moments formulation of the Reissner-Mindlin plate model. The introduction of the bending moment as an extra unknown leads to a new weak formulation, where the symmetry of this variable is imposed strongly in the space. This weak problem is proved to be well-posed, and stabilised Galerkin schemes for its discretisation are presented and analysed. The finite element methods are such that the bending moment tensor is sought in a finite element space constituted of piecewise linear continuos and symmetric tensors. Optimal error estimates are proved, and these findings are illustrated by representative numerical experiments.     

Enforcing Efficient Equilibria in Network Design Games via Subsidies

The efficient design of networks has been an important engineering task that involves challenging combinatorial optimization problems. Typically, a network designer has to select among several alternatives which links to establish so that the resulting network satisfies a given set of connectivity requirements and the cost of establishing the network links is as low as possible. The Minimum Spanning Tree problem, which is well-understood, is a nice example.In this paper, we consider the natural scenario in which the connectivity requirements are posed by selfish users who have agreed to share the cost of the network to be established according to a well-defined rule. The design proposed by the network designer should now be consistent not only with the connectivity requirements but also with the selfishness of the users. Essentially, the users are players in a so-called network design game and the network designer has to propose a design that is an equilibrium for this game. As it is usually the case when selfishness comes into play, such equilibria may be suboptimal. In this paper, we consider the following question: can the network designer enforce particular designs as equilibria or guarantee that efficient designs are consistent with users’ selfishness by appropriately subsidizing some of the network links? In an attempt to understand this question, we formulate corresponding optimization problems and present positive and negative results.     

Hybrid Difference Methods for PDEs

We propose the hybrid difference methods for partial differential equations (PDEs). The hybrid difference method is composed of two types of approximations: one is the finite difference approximation of PDEs within cells (cell FD) and the other is the interface finite difference (interface FD) on edges of cells. The interface finite difference is obtained from continuity of some physical quantities. The main advantages of this new approach are that the method can applied to non-uniform grids, retaining the optimal order of convergence and stability of the numerical method for the Stokes equations is obtained without introducing staggered grids.     

Dynamic Model Adaptation for Multiscale Simulation of Hyperbolic Systems with Relaxation

In numerous industrial CFD applications, it is usual to use two (or more) different codes to solve a physical phenomenon: where the flow is a priori assumed to have a simple behavior, a code based on a coarse model is applied, while a code based on a fine model is used elsewhere. This leads to a complex coupling problem with fixed interfaces. The aim of the present work is to provide a numerical indicator to optimize to position of these coupling interfaces. In other words, thanks to this numerical indicator, one could verify if the use of the coarser model and of the resulting coupling does not introduce spurious effects. In order to validate this indicator, we use it in a dynamical multiscale method with moving coupling interfaces. The principle of this method is to use as much as possible a coarse model instead of the fine model in the computational domain, in order to obtain an accuracy which is comparable with the one provided by the fine model. We focus here on general hyperbolic systems with stiff relaxation source terms together with the corresponding hyperbolic equilibrium systems. Using a numerical Chapman–Enskog expansion and the distance to the equilibrium manifold, we construct the numerical indicator. Based on several works on the coupling of different hyperbolic models, an original numerical method of dynamic model adaptation is proposed. We prove that this multiscale method preserves invariant domains and that the entropy of the numerical solution decreases with respect to time. The reliability of the adaptation procedure is assessed on various 1D and 2D test cases coming from two-phase flow modeling.     

Towards Smooth Particle Methods Without Smoothing

In this article we present a new class of particle methods which aim at being accurate in the uniform norm with a minimal amount of smoothing. The crux of our approach is to compute local polynomial expansions of the characteristic flow to transport the particle shapes with improved accuracy. In the first order case the method consists of representing the transported density with linearly-transformed particles, the second order version transports quadratically-transformed particles, and so on. For practical purposes we provide discrete versions of the resulting LTP and QTP schemes that only involve pointwise evaluations of the forward characteristic flow, and we propose local indicators for the associated transport error. On a theoretical level we extend these particle schemes up to arbitrary polynomial orders and show by a rigorous analysis that for smooth flows the resulting methods converge in \(L^\infty \) without requiring remappings, extended overlapping or vanishing moments for the particles. Numerical tests using different passive transport problems demonstrate the accuracy of the proposed methods compared to basic particle schemes, and they establish their robustness with respect to the remapping period. In particular, it is shown that QTP particles can be transported without remappings on very long periods of time, without hampering the accuracy of the numerical solutions. Finally, a dynamic criterion is proposed to automatically select the time steps where the particles should be remapped. The strategy is a by-product of our error analysis, and it is validated by numerical experiments.     

An improved factor based approach to precedential constraint

In this article I argue for rule-based, non-monotonic theories of common law judicial reasoning and improve upon one such theory offered by Horty and Bench-Capon. The improvements reveal some of the interconnections between formal theories of judicial reasoning and traditional issues within jurisprudence regarding the notions of the ratio decidendi and obiter dicta. Though I do not purport to resolve the long-standing jurisprudential issues here, it is beneficial for theorists both of legal philosophy and formalizing legal reasoning to see where the two projects interact.