Shift-full-rank matrices and applications in space-time trellis codes for relay networks with asynchronous cooperative diversity

To achieve full cooperative diversity in a relay network, most of the existing space-time coding schemes require the synchronization between terminals. A family of space-time trellis codes that achieve full cooperative diversity order without the assumption of synchronization has been recently proposed. The family is based on the stack construction by Hammons and El Gamal and its generalizations by Lu and Kumar. It has been shown that the construction of such a family is equivalent to the construction of binary matrices that have full row rank no matter how their rows are shifted, where a row corresponds to a terminal (or transmit antenna) and its length corresponds to the memory size of the trellis code on that terminal. We call such matrices as shift-full-rank (SFR) matrices. A family of SFR matrices has been also constructed, but the memory sizes of the corresponding space-time trellis codes (the number of columns of SFR matrices) grow exponentially in terms of the number of terminals (the number of rows of SFR matrices), which may cause a high decoding complexity when the number of terminals is not small. In this paper, we systematically study and construct SFR matrices of any sizes for any number of terminals. Furthermore, we construct shortest (square) SFR (SSFR) matrices that correspond to space-time trellis codes with the smallest memory sizes and asynchronous full cooperative diversity. We also present some simulation results to illustrate the performances of the space-time trellis codes associated with SFR matrices in asynchronous cooperative communications.     

噪声环境下语音识别方法的研究

1引言 语音识别的性能常常与环境背景噪声等的干扰有密切关系A[1],这些都是语音识别的识别率得不到进一步提高的主要因素.     

一种基于CORBA的分布式全文检索系统设计

海量信息的全文检索是人类获取信息的重要手段之一,而网络海量信息的检索使传统的全文检索技术面临新的挑战。如何改善检索系统的结构,提高检索系统的性能和效率,以加快检索速度,成为一个值得研究的课题。公用对象请求代理体系CORBA技术的出现为这一课题提供了一个有效的解决方法。该文在对WEB计算方式和CORBA体系进行详细讨论的基础上,结合实际课题的研究,给出了一种基于CORBA技术的分布式全文检索系统架构设计。     

直流PWM伺服系统的一种新型控制器

文章设计了一种新型的直流PWM自适应变结构控制器，并且采用了非线性反馈技术，理论分析与实验表明该系统获得良好的快速性、准确性和鲁棒性。     

葫芦岛蒙脱土的特征与催化活性

研究了葫芦岛蒙脱土的某些特征与催化活性。该蒙脱石的离子交换能力与层间距分别是７５ｍｅｑ／１００ｇ和１．５２９ｎｍ，对偏三甲苯的歧化、异构化以及偏四甲苯的脱甲基、异构化都具有催化活性。这些数据表明葫芦岛蒙脱土是一种有用的催化材料。     

Microstructure evolution during reheating of a Nb-bearing steel I. Metallographic examination

Cooled in water after the isothermal relaxation of deformed austenite for different timea, a Nb-bearing microalloyed steel always exhibits synthetic microstructures of bainitic ferrite, granular bainite and acicular ferrite. When these samples were reheated to and held at 650 or 700℃, the non-equilibrious microstructures tend to evolve into equilibrious ones. The sample relaxed for 60 s displays the highest thermostability, while the microstructure evolution is the quickest in the sample relaxed for 1000 s even though it is the softest before reheating. Softening is not a single process occurring during reheating, in which the hardness fluctuates with time. There are two peaks in the hardness-time curve of each sample having undergone relaxation, while a single peak occurs in the curve of the sample having not been relaxed. Pre-strain accelerates the evolution process. These results indicate that the thermostability of microstructures is determined by their history of formation to a considerable degree.     

碳、硅含量对重载车轮钢显微组织的影响

利用金相显微术、扫描电镜、透射电镜以及X射线衍射测量技术研究碳、硅含量对重载车轮钢显微组织的影响。结果表明:重载车轮钢的显微组织由珠光体和少量先共析铁素体组成,适当降低碳含量、增加硅含量不仅使珠光体含量减少,而且导致珠光体的片层间距增大;与珠光体团内层片状组织相比,珠光体团界处的渗碳体不再呈片状、而是以颗粒状不连续分布,同时渗碳体含量相对较少。     

基于NiosⅡ和SD卡的数据采集系统的设计

在NiosⅡ软核处理器上采用SD卡设计了一种嵌入式文件系统,并在该文件系统和FPGA的基础上设计了一种便携式数据采集系统.     

无动力快速浮选在山东某黄金矿山的应用

山东某黄金矿山选矿厂由于浮选工艺流程中旋流器与取样机之间高差较大,以致溢流矿浆流速快、动能大,易造成对管路、弯头及取样机缓冲箱的冲击磨损。鉴于此,在旋流器溢流进入浮选粗选前增加快速浮选槽,以充分利用矿浆的动能,将原浮选工艺流程前增设无动力快速浮选工艺,并对改造后工艺流程结构进行了优化,将原三次扫选改为二次扫选。无动力快速浮选工艺的应用,不但节约了能耗,而且提高了金回收率,其由改造前的91.69%提高到93.06%,生产指标较好。     

Studied on a novel human keratinocyte membrane delivery system in vitro

The culture of keratinocytes on flexible membranes has been proposed as a means to simplify, accelerate and improve the efficiency with which proliferating cells are delivered to full thickness or non-healing skin defects. The purpose of this article was to study the ability of chitosan-gelatin manbranes to facilitate the growth of human keratinocytes. The membranes with different chitosan contents were studied. The surface properties of chitosan-gelatin membranes were investigate by SEM, and water contact angle test. The mechanical property of the membranes was tested. Data implied that gelatin could make the membranes more flexible and hydrophilic than chitosan membranes, which may regulate the seeded cells behavior. Loading human keratinocytes on chitosan-gelatin membranes, cells attachment, spread, and growth were investigated by light microscopy, SEM, and MTT test. The results suggested that the adhesion and proliferation of keratinocytes seeded on chitosan-gelatin membranes were same as on tissue culture plate, in which gelatin could modify the interaction between keratinocytes and chitosan membranes. Therefore, chitosan-gelatin membrane is a good candidate for keratinocytes delivery system.