A combined dislocation—cohesive zone model for fracture in a confined ductile layer

The collective dislocation behavior near a crack tip in a ductile layer sandwiched between two brittle solids is analyzed via two-dimensional dislocation dynamics (DD) simulations that incorporate a cohesive zone (CZ) model. The cohesive crack tip is treated as part of a much larger finite crack confined in the ductile layer. The underlying boundary value problem is formulated with a set of boundary integral equations and numerically evaluated with a collocation method. The fracture energy of the layered composite material is shown to be strongly correlated with the layer thickness and is directly influenced by the cohesive strength of the ductile layer (Hsia KJ et al. (1994) J Mech Phys Solids 6 877–896).     

电子设备的建模研究

本文首先介绍了开关电源的基本工作原理和电路构成,在此基础上,通过试验研究,建立了计算机和电视机等电子设备的静态负荷模型。所得结论,为电力系统稳定分析计算提供了依据。     

一种基于CPLD的单片机与PCI接口设计解决方案

本文描述了用赛灵思公司的XC95216系列CPLD芯片实现扩展单片机与计算机PC104的接口并行通信的方法,解决了在嵌入式操作系统中单片机与主机总线设备打交道资源不足的固有缺陷,把以太网卡的功能集成在一片XC95216的CPLD中,简化了硬件,通信实时性强;并给出用VHDL编写的主要源程序。该方案在实践中检验通过。     

Strain rate sensitivity of tensile properties in high Nb containing TiAl alloys

The effect of strain rate on the yield strength of high Nb containing TiAl alloy was studied. The results show that the strain rate sensitivity varies with the test temperature, and the yield strength is not sensitive to the strain rate at room temperature but significantly sensitive to the strain rate at high temperature. An increase of the strain rate or a decrease of the temperature results in an obvious change of fracture mode. It is found that the strain rate sensitivity of this alloy varying with temperature is due to the dislocation climb generated at high temperature.     

理论模型在高质量、无缺陷铸坯生产中的应用

尽管连续铸钢技术已经在全世界广泛、成功地应用，然而通过现存所选择的工艺和设计参数来生产高质量产品还有一些障碍。近年来，通过冶金工作者的不断努力，取得了一些突破性成就。     

A refined beam theory based on the refined plate theory

Summary Based on the refined plate theory, a refined theory of rectangular beams is derived by using the Papkovich-Neuber solution and Lur’e method without ad hoc assumptions. It is shown that the displacements and stresses of the beam can be represented by the angle of rotation and the deflection of the neutral surface. The solutions based on the new theory are the same as the exact solutions of elasticity theory. In three examples it is shown that the new theory provides as good or better results than Levinson’s beam theory when compared to those obtained from the linear theory of elasticity.     

焚烧炉烟气中铅、锌、苯并(a)芘的测定

建立了用电感耦合等离子体光谱法(ICP-AES)和高效液相色谱法(HPLC)分别测定焚烧炉烟气中铅(Pb)、锌(Zn)和苯并(a)芘(BaP)的分析方法。研究了烟尘及玻璃纤维滤筒的预处理，测定Pb、Zn、BaP时基体的干扰与消除，并给出Pb、Zn的干扰校正系数。实验测得Pb、Zn和BaP的回收率超过84％，相对标准偏差Pb为3．51％，Zn为7．28%，BaP为4．30％。实验结果表明，该分析方法可以满足焚烧炉运行中的监测需要．     

Preparation and characterization of Ni/Co bimetallic nano-clusters

Ni/Co bimetallic nano-cluters have been prepared from the aqueous solution by reducing their corresponding metal salts under suitable conditions. The experimental conditions including the type and concentration of protective agent, feeding order and the pH of the solution that influence the average particle size have been studied in detail. Transmission electron microscopy (TEM) indicates that the shape of those bimetallic nano-cluster particles is spheroid. The alloy structure has been shown by X-ray powder diffraction (XRD). The X-ray photoelectron spectroscopic (XPS) data have confirmed that the nickel and cobalt in the bimetallic nano-clusters are in the zero-valence state.