Pulsed electron-beam annealing of phosphorus-implanted silicon

Electrical properties of phosphorus-implanted silicon annealed by a single shot of a high-power pulsed electron beam have been studied by differential Hall-effect and sheet-resistivity measurements. Nearly 100% electrical activation of implanted phosphorus can be obtained after electron-beam annealing at an incident energy density of 0.92 J/cm2. Uniformly distributed carrier concentration profiles have been formed by electron-beam annealing.     

Laser Mode Partition Noise Evaluation for Optical Fiber Transmission

An evaluation of the influence of mode partition noise on error rate performance in a high bit rate optical fiber transmission system is presented. First, it is experimentally clarified that the intensity in each longitudinal mode of a laser diode fluctuates, although the intensity for the total mode is constant. It is also established that this fluctuation causes degradation of the error rate performance after transmission through a long optical fiber. The fluctuation is named "mode partition noise." Next a simple model for the fluctuation is proposed. The characteristics of the fluctuation are discussed on the basis of this model. Optical waveform fluctuation is found to be introduced by mode partition noise in the course of transmission through a long despersive transmission medium. This optical waveform fluctuation and its frequency spectrum are calculated. Finally, the error rate performance is evaluated and specifications required for a laser spectrum to attain a given repeater spacing are clarified.     

Interaction of beta-lactam antibiotics with H+/peptide cotransporters in rat renal brush-border membranes

Two H+/peptide cotransporters, PEPT1 and PEPT2, are expressed in the kidney, mediating the renal tubular reabsorption of oligopeptides and beta-lactam antibiotics. We examined the interactions of beta-lactam antibiotics with peptide transporters in rat renal brush-border membranes by evaluating the inhibitory potencies of the antibiotics against glycylsarcosine transport. Western blot analysis revealed that PEPT1 and PEPT2 were expressed in the renal brush-border membranes with the apparent molecular masses of 75 and 105 kDa, respectively. Using renal brush-border membrane vesicles, the uphill transport of glycylsarcosine was observed in the presence of an inward H+ gradient and an inside-negative membrane potential. Two transport systems with high affinity (Km of 50 microM) and low affinity (Km of 1.2 mM) appeared kinetically to mediate the glycylsarcosine uptake. The inhibition constants of the antibiotics for glycylsarcosine transport were more closely correlated with those in stable LLC-PK1 cells transfected with rat PEPT2 rather than PEPT1 cDNA. The beta-lactam antibiotics with an alpha-amino group showed trans-stimulation effects on the glycylsarcosine uptake, suggesting that these antibiotics and glycylsarcosine share a common peptide transporter. However, the antibiotics lacking an alpha-amino group failed to show the trans-stimulation effect. It is concluded that amino-beta-lactam antibiotics at therapeutic concentrations interact predominantly with PEPT2 localized in the brush-border membranes of rat kidney.     

Gradient-index lens-array method based on real-time integral photography for three-dimensional images

Because a three-dimensional (3-D) autostereoscopic image can be seen from a desired viewpoint without the aid of special viewing glasses, integral photography (IP) is an ideal way to create 3-D autostereoscopic images. We have already proposed a real-time IP method that offers 3-D autostereoscopic images of moving objects in real time by use of a microlens array and a high-definition television camera. But there are two problems yet to be resolved: One is pseudoscopic images that show a reversed depth representation. The other is interference between the element images that constitute a 3-D autostereoscopic image. We describe a new gradient-index lense-array method based on real-time IP to overcome these two problems. Experimental results indicating the advantages of this method are shown. These results suggest the possibility of using a gradient-index lens array for real-time IP.     

Nitridation enhancing effect of ZrO2 on silicon powder

The nitridation behavior of silicon powder with added Zr compounds was studied in order to assess the catalytic effect of zirconium on the formation of reaction bonded silicon nitride, using high purity silicon powder and monoclinic zirconia as starting materials. Thermogravimetric analysis revealed that the addition of ZrO₂ to Si powder reduced the temperature of the main nitridation reaction, and increased the amount of silicon converted to silicon nitride at a given temperature. On the other hand, the nitridation rate at higher temperatures (1380-1400 °C) indicated similar values for both pure Si and Si with ZrO₂ additions.     

Hazard curve evaluation method development for a forest fire as an external hazard on nuclear power plants

A method to obtain a hazard curve of a forest fire was developed. The method has four steps: a logic tree formulation, a response surface evaluation, a Monte Carlo simulation, and an annual exceedance frequency calculation. The logic tree consists domains of “forest fire breakout and spread conditions”, “weather conditions”, “vegetation conditions”, and “forest fire simulation conditions.” Condition parameters of the logic boxes are static if stable during a forest fire or not sensitive to a forest fire intensity, and non-static parameters are variables whose frequency/probability is given based on existing databases or evaluations. Response surfaces of a reaction intensity and a fireline intensity were prepared by interpolating outputs from a number of forest fire propagation simulations by fire area simulator (FARSITE). The Monte Carlo simulation was performed where one sample represented a set of variable parameters of the logic boxes and a corresponding intensity was evaluated from the response surface. The hazard curve, i.e. an annual exceedance frequency of the intensity, was therefore calculated from the histogram of the Monte Carlo simulation outputs. The new method was applied to evaluate hazard curves of a reaction intensity and a fireline intensity for a typical location around a sodium-cooled fast reactor in Japan.     

Spermiogenesis is impaired in mice bearing a targeted mutation in the protein phosphatase 1cgamma gene

Type 1 protein phosphatases (PP1) are involved in diverse cellular activities, ranging from glycogen metabolism to chromatin structure modification, mitosis, and meiosis. The holoenzymes are composed of two or more subunits, including a catalytic subunit (PP1c) and one or more regulatory subunits. Many eukaryotes possess several catalytic subunit genes which encode highly conserved isoforms. In rodents, one of these isoforms, PP1cgamma2, appears to be expressed predominantly in testes. Whether PP1cgamma2 performs a testis-specific function is unclear. To address this and other questions, the PP1cgamma gene was disrupted by targeted insertion in murine embryonic stem cells. Mice derived from these cells were viable, and homozygous females were fertile. However, males homozygous for the targeted insertion were infertile. Histological examination revealed severe impairment of spermiogenesis beginning at the round spermatid stage. In addition, defects in meiosis were inferred from the presence of polyploid spermatids. Immunohistochemistry revealed the presence of PP1calpha protein on condensing spermatids in both wild-type and mutant testes, suggesting that this closely related isoform is unable to compensate for the loss of PP1cgamma. These defects are discussed in the light of known functions of protein phosphatase 1.     

Numerical simulation of oscillatory flow in melt during InSb single crystal growth by RF heating Czochralski method

Oscillatory flow present in the melt during InSb single crystal growth using an RF-heating Czochralski method has been numerically investigated by means of the finite difference method using the HSMAC algorithm. The thermal boundary conditions required for the numerical simulation model were obtained experimentally by measuring the temperature profile along the crucible of a Czochralski system by means of thermocouples mounted in the crucible. Results of numerical simulations showed that the use of a third-order upwind discretization scheme was necessary to catch the oscillatory behaviour of the fluid flow in the melt. It was shown that this oscillatory behaviour strongly depends on the crystal rotation rate. Indeed, the oscillation period increases when the crystal rotation rate is above a critical rotation rate. In order to avoid such oscillations, crystal rotation rates lower than this critical value of crystal rotation rate must be selected for the growth of high quality crystals free of striations. © 1998 John Wiley & Sons, Ltd.