Characterization of spectral responses of humic substances upon UV irradiation using two-dimensional correlation spectroscopy

The spectral responses of a leaf litter derived humic substance (LLHS) and Suwannee River fulvic acid (SRFA) upon ultraviolet (UV) A irradiation were characterized using two-dimensional correlation spectroscopy (2D-COS) based on the absorption and the synchronous fluorescence spectra at different irradiation times. A 12 day irradiation on the humic substances (HS) resulted in higher reduction of the absorbance relative to the dissolved organic carbon concentration, suggesting that aromatic chromophores were preferentially oxidized and/or non UV-absorbing compounds were generated by the photobleaching. Synchronous fluorescence spectra revealed the preferential removal of fulvic-like and humic-like fluorophores and delayed response of protein-like fluorescence upon the irradiation. The spectral features at long wavelengths (>430 nm) appear to be affected by intra-molecular interactions of the individual chromophores associated with shorter wavelengths. Absorption-based 2D-COS demonstrated that there are three types of absorption bands for the two HS, which changed sequentially in the order of 290-400 nm → 200-250 nm → 250-290 nm. In addition, two or three distinctive fluorescence bands in response to the irradiation were identified from 2D-COS. The sequential orders and the associated wavelength bands were possibly explained by the irradiation wavelengths and the differences between direct and indirect photochemical reactions. The interpretation of the 2D-COS results was very consistent with the kinetic rate constants individually calculated at several discrete wavelengths. Our study demonstrated that 2D-COS could be used as a powerful tool in identifying distinctive bands of HS that have dissimilar behavior and the associated sequential orders by visualizing the spectral changes at continuous wavelengths.     

Three‐Dimensional Branched Nanowire Heterostructures as Efficient Light‐Extraction Layer in Light‐Emitting Diodes

A facile method to fabricate three‐dimensional branched ZnO/MgO nanowire heterostructures and their application as the efficient light‐extraction layer in light‐emitting diodes are reported. The branched MgO nanowires are produced on the hydrothermally‐grown ZnO nanowires with a small tapering angle towards the tip (≈6°), by the oblique angle flux incidence of MgO. The structural evolution during the growth verifies the formation of the MgO nanoscale islands with strong (111) preferred orientation on very thin (5–7 nm) MgO (110) layer. The MgO nanobranches, then grown on the islands, are polycrystalline consisting of many grains oriented in specific directions of <200> and <220>, supported by the nucleation theory. The LEDs with the branched ZnO/MgO nanowire arrays show a remarkable enhancement in the light output power by 21% compared with that of LEDs with pristine ZnO nanowires. Theoretical calculations using a finite‐difference time‐domain method reveal that the nanostructure is very effective in breaking the wave‐guiding mode inside the ZnO nanowires, extracting more light especially in radial direction through the MgO nanobranches.     

Pinostrobin Suppresses the α-Melanocyte-Stimulating Hormone-Induced Melanogenic Signaling Pathway

Pinostrobin is a dietary flavonoid found in several plants that possesses pharmacological properties, such as anti-cancer, anti-virus, antioxidant, anti-ulcer, and anti-aromatase effects. However, it is unclear if pinostrobin exerts anti-melanogenic properties and, if so, what the underlying molecular mechanisms comprise. Therefore, we, in this study, investigated whether pinostrobin inhibits melanin biosynthesis in vitro and in vivo, as well as the potential associated mechanism. Pinostrobin reduced mushroom tyrosinase activity in vitro in a concentration-dependent manner, with an IC₅₀ of 700 μM. Molecular docking simulations further revealed that pinostrobin forms a hydrogen bond, as well as other non-covalent interactions, between the C-type lectin-like fold and polyphenol oxidase chain, rather than the previously known copper-containing catalytic center. Additionally, pinostrobin significantly decreased α-melanocyte-stimulating hormone (α-MSH)-induced extracellular and intracellular melanin production, as well as tyrosinase activity, in B16F10 melanoma cells. More specifically, pinostrobin inhibited the α-MSH-induced melanin biosynthesis signaling pathway by suppressing the cAMP–CREB–MITF axis. In fact, pinostrobin also attenuated pigmentation in α-MSH-stimulated zebrafish larvae without causing cardiotoxicity. The findings suggest that pinostrobin effectively inhibits melanogenesis in vitro and in vivo via regulation of the cAMP–CREB–MITF axis.     

A case study on detection and sizing of defects in steam generator tubes using eddy current testing

Eddy current testing (ECT) method is widely used to detect various types of defects occurring in nuclear steam generator tubes. Therefore, the reliability of its detection and sizing accuracy for defects should be validated. For this purpose, two tubes with defect signals were pulled from an operating steam generator and destructively examined. The defect type was a circumferential crack for one tube and an intergranular attack (IGA) for the other tube. The plus point coil probe showed a better capability to detect and size both a circumferential crack and a volumetric IGA than pancake and bobbin coil probe. The destructive results are correlated with the ECT results obtained during the in-service inspection.     

Antimicrobial performance of alkaline ionic fluid (GC-100X) and its ability to remove Escherichia coli O157:H7 from the surface of tomatoes

An efficacy test of GC-100X, a noncorrosive alkaline ionic fluid (pH 12) composed of free radicals and supplemented with xylitol, was carried out against six major foodborne pathogens-Staphylococcus aureus FRI 913, Salmonella enterica serovar Enteritidis ATCC 13076, S. enterica serovar Typhimurium DT104 Korean isolate, Vibrio parahaemolyticus ATCC 17803, Escherichia coli O157:H7 ATCC 43894, and Pseudomonas aeruginosa KCTC 1637-at three different temperatures (4, 25, and 36 degrees C) with or without organic load (2% yeast extract). Results revealed a more than 4-log10 (CFU/ml) reduction (1.0 x 10(4) CFU/ml reduction) against all pathogens reacted at 37 degrees C for 3 h in the absence of organic material. GC-100X solution diluted with an equal volume of distilled or standard hard water (300 ppm CaCO3) showed effective bactericidal activity, particularly against gram-negative bacteria. Washing efficacy of GC-100X solution was compared against E. coli O157:H7 on cherry tomato surfaces with those of a commercially used detergent and chlorine water (100 ppm). Viable cell counts of E. coli O157:H7 that had penetrated to the cores of tomatoes after sanitizing treatment revealed that GC-100X stock and its 5% diluted solutions had similar washing effects to 100-ppm chlorine water and were more effective than the other kitchen detergent. These results indicate that GC-100X has good bactericidal and sanitizing activities and is useful as a new sanitizer for food safety and kitchen hygiene.     

Theoretical investigation of optical wavelength conversion techniques for DPSK Modulation formats using FWM in SOAs and frequency comb in 10 gb/s transmission systems

We have investigated the wavelength conversion techniques for differential phase-shift keying (DPSK) modulation formats in 10 Gb/s transmission systems, compared with the non-return-to-zero (NRZ) modulation format. For the wavelength conversion of DPSK modulation formats, we employed the wavelength converters based on the four-wave mixing (FWM) in semiconductor optical amplifiers (SOAs) and the frequency comb generated by phase modulation. The power penalty at 10/sup -9/ bit error rate was used as a measure of the system performance degraded by the wavelength conversion. Our simulation results show that the DPSK modulation formats have a smaller power penalty than the NRZ modulation format for the wavelength conversion using the FWM effect in an SOA due to a much lower pattern effect. However, as the wavelength conversion uses the frequency comb generated by phase modulation, it has a similar power penalty compared with the NRZ modulation format. It is also shown that the DPSK modulation formats are possible to obtain the power penalty less than 0.4 dB for both wavelength conversion techniques.     

High efficiency single pulse doped Al0.60In0.40As/GaInAs/InP HEMTs for Q-band power applications

Single pulse doped, 0.2 μm-gate Al_0.60In_0.40 As/GaInAs/InP HEMTs have been fabricated and characterised. The complete process sequence for the HEMTs includes SiN_x passivation and dry etched via hole fabrication. Power measurements at 44 GHz on a 10×60 μm² device yielded 225 mW output power, 5 dB associated gain, and 39% power added efficiency. The results indicate that the single pulse doped InP-based HEMTs are suitable for high power applications at Q-band     

Guided growth of large-scale, horizontally aligned arrays of single-walled carbon nanotubes and their use in thin-film transistors

A convenient process for generating large-scale, horizontally aligned arrays of pristine, single-walled carbon nanotubes (SWNTs) is described. The approach uses guided growth, by chemical vapor deposition (CVD), of SWNTs on miscut single-crystal quartz substrates. Studies of the growth reveal important relationships between the density and alignment of the tubes, the CVD conditions, and the morphology of the quartz. Electrodes and dielectrics patterned on top of these arrays yield thin-film transistors that use the SWNTs as effective thin-film semiconductors. The ability to build high-performance devices of this type suggests significant promise for large-scale aligned arrays of SWNTs in electronics, sensors, and other applications.     

Evaluation of coagulation and PAC adsorption pretreatments on membrane filtration for a surface water in Korea: A pilot study

Application of membrane filtration has been significantly expanded throughout the world in two decades. A project was launched to facilitate the application of membrane filtration in drinking water plants in Korea in 2004. Five pilot plants each with a capacity of 500 m³/d were installed in a Gueui Drinking Water Plant. The Han River water was a main raw water source for the plants. Key parameters of the raw water were examined. The raw water characteristics are tremendously varied with seasons and rain fall, especially in terms of turbidity and algae numbers. The operation of pretreatment was of substantial importance due to the variation of the raw water. Coagulation and powdered activated carbon adsorption were performed as pretreatment options of microfiltration. The coagulant doses were optimized with increasing turbidity compared to the conventionally used operational manual. PAC adsorption was applied to overcome fouling by high algae numbers. The addition of PAC relieved the aggravation of fouling. However, the PAC addition could not stop the undergoing fouling. A set of laboratory experiments showed that the removal of floc aggregates after coagulation and PAC was critical to maintain high water flux in the membrane system.