Quality characteristics of Cheonggukjang containing Phellinus linteus extracts and antitumor effects in hep-2 and SK-MES cells

The quality characteristics of cheonggukjang containing Phellinus linteus extracts (PLE) and its cytotoxicity in Hep-2 and SK-MS-cells were investigated. Cheonggukjang containing 0.3% PLE showed the highest protease activity (7^th aging day). The reducing sugar content and the amylase activity of cheonggukjang supplemented with 0.3% PLE increased immediately on the 1st aging day, and decreased slightly until the 15^th aging day. All samples showed an increase in the amino-type nitrogen content. The dominant volatile compound detected using chromatography-mass spectrophotometry was 2,5-dimethyl pyrazine with the highest peak area value of 17.36% observed in cheonggukjang containing 0.3% PLE (3^rd aging day). Cheonggukjang containing 0.3% PLE exhibited the best taste and acceptability with the least unpleasant odor. Cheonggukjang supplemented with PLE had a higher antitumor activity against SK-MES-1 and Hep-2 cells than a control. Hep-2 cells treated with a 10 mg/mL extract of cheonggukjang containing 0.3% PLE showed the highest growth inhibition rate of 84.74%.     

Synthesis and Self-assembling Properties of 2,2′:6′,2″-Terpyridine-Based Carbon Nanotube Coordination Polymers

A novel metallo-supramolecular polytopic ligand was synthesized from the attachment reaction involving an amino group-functionalized multi-wall carbon nanotube and 4-chloro-2,2′:6′,2″-terpyridine used for the preparation of metallo-supramolecular polymers with Co(II) or Ni(II) ions. Different colors were observed depending on either the ligands or the metal ions in this type of supramolecular assembly. The created supramolecular polymers were characterized by means of structure, morphology, and stimuli-responsive performance employing scanning electron microscopy, amperometric techniques, UV–Vis and Fourier transform infrared spectroscopy. UV–Vis spectroscopy and cyclic voltammetry studies confirmed that both the optical and electrochemical properties of metallo-supramolecular materials are affected by the substituent at the pyridine periphery.     

Effect of induction heating on fatigue life of drive plate for dual mass flywheel

A dual mass flywheel has positive effects on noise and vibration problems, but there are still difficulties securing sufficient component durability during the development process to increase the output. In this study, the fatigue life of a drive plate, a component in the power transmission path that is often fractured by cyclic loading, is evaluated in relation to heat treatment, and the effect of heat treatment on the fatigue life is studied. For this purpose, a fatigue test and rig test are conducted on both the raw material and heat-treated material of the drive plate. Based on the fatigue material properties obtained from the fatigue tests and the boundary conditions of the rig test, a fatigue analysis is conducted to predict the fatigue life. The heat-treated material has a fatigue life five times longer than the raw material in both the rig test and fatigue analysis. The fatigue life evaluation method is validated through a comparison of the life predicted by the fatigue analysis and the test results of the rig test.     

Microstructures and transformation behavior of Ti-Ni-Cu shape memory alloy powders fabricated by ball milling method

Ti-Ni and Ti-Ni-Cu alloy powders have been fabricated by ball milling after which their microstructures and transformation behaviors were investigated by means of scanning electron microscopy, X-ray diffraction, energy dispersive X-ray analysis, transmission electron microscopy and differential scanning calorimetry. The powders of as-milled Ti-Ni-Cu alloys whose Cu-content is less than 5 at.% were mixtures of crystal and amorphous, whereas those alloy powders whose Cu-content is more than 10 at.% were crystalline. The B19’ martensite is formed in the Ti-Ni-Cu alloy powders whose Cu-content is less than 10 at.%, whereas the B19 and B19’ martensites coexist in those whose Cu-content is more than 10 at.%. The martensitic transformation range became wider with increasing rotating speed, and so endothermic and exothermic peaks obtained from differential scanning calorimetry were indiscernible.     

Combined adsorption and Chemical precipitation process for pretreatment or post-treatment of landfill leachate

Performances of combined adsorption and chemical precipitation were evaluated as one of the options for pretreatment or post-treatment of a municipal solid waste (MSW) landfill leachate and leachate from an industrial solid waste landfill. The COD and color removals of the leachate from a MSW landfill were 35% and 33% at an alum dose of 300 mg/L with preceding PAC (powdered activated carbon) dose of 200 mg/L, respectively. For MSW leachate, the combined adsorption and coagulation process showed 2.3 times higher COD removal at PAC dose of 200 mg/L and alum dose of 500 mg/L than the unit process of adsorption with poor settleability. The COD removal was accomplished mainly by adsorption, while coagulation was a key mechanism of color removal. The COD and color of the biologically treated leachate from an industrial solid waste landfill were removed up to 32% and 68%, respectively, at addition of 490 mgAlum/L and 1,000 mgPAC/L in adsorption-coagulation process with pH control. Combined adsorption and coagulation process with pH control showed better COD and color removal than the process without pH control. The color removal was influenced greatly by pH control, while COD removal was not. No difference in removal efficiency was observed between adsorption-coagulation and coagulation-adsorption. Maximum net increases in the COD and color removals by the adsorption-coagulation process were 40% and 46%, respectively, compared with the removals by sole chemical precipitation. The Freundlich isotherm exclusively described the adsorption of leachate components on the PAC. Thus, a combined adsorption and coagulation process was considered to be effective for pre-treatment or post-treatment of landfill leachate, and has distinct features of simple, flexible, stable and reliable operation against fluctuation of leachate quality and flowrate.     

RuO2/GaN Schottky contact formation with superiorforward and reverse characteristics

This is a first time report of a ruthenium oxide (RuO₂) Schottky contact on GaN. RuO₂ and Pt Schottky diodes were fabricated and their characteristics compared. When the RuO₂ Schottky contact was annealed at 500°C for 30 min, the current-voltage (I-V) and capacitance-voltage (C-V) characteristics of the RuO₂ were dramatically improved. The annealed RuO₂ /GaN Schottky contact exhibited a reverse leakage current that was at least two or three orders lower in magnitude than that of the Pt/GaN contact along with a very large barrier height of 1.46 eV, which is the highest value ever reported for a GaN Schottky system     

Enhancement of the dielectric properties of Pb(La,Ti)O3 thin films fabricated by pulsed laser deposition

PLT thin films with a thickness of 600 nm were grown by pulsed laser deposition (PLD) using different laser wavelengths of 355, 532 and 1064 nm, respectively. We have systematically investigated the variation of grain sizes depending on the process condition. A two-step process to grow (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) films was adopted and verified to be useful to enlarge the grain size of the film and to enhance leakage current characteristics. Structural and electrical properties including dielectric constant, ferroelectric characteristics, and leakage current of PLT thin films were shown to be strongly influenced by grain size.     

Flow analysis of engine cooling system for a passenger vehicle

A numerical simulation is carried out to analyze the flow field of cooling air through the radiator and engine compartment. In order to consider the strong effect of the suction-type flow by the cooling fan at engine idling condition, a potential flow analysis is attempted by the assumption of a line sink located at the position of the cooling fan. The governing equations for steady two-dimensional, incompressible, turbulent flow are solved with the two-equationk-ε model for turbulence. The velocity profiles in the underhood engine compartment and around the front-end of a real vehicle are measured to compare with the numerical results. The agreement between the numerical and experimental results is fairly good. It is concluded that a two-dimensional computation is a fast and efficient tool for predicting the effect of front-end design on the cooling air flow through the radiator.     

Torque characteristic analysis considering the manufacturing tolerance for electric machine by stochastic response surface method

Manufacturing tolerances as well as measuring errors have a great influence on products designed by optimization technique, etc., to improve their characteristics and reduce the production cost. Therefore, tolerance analysis technique is required to find the tolerance band of design variables for minimizing the effect and estimating the characteristic distribution of the products. This paper represents the torque characteristics considering the manufacturing tolerance of an electric machine. In order to analyze the tolerance of the brushless DC (BLDC) motor, stochastic response surface methodology (SRSM), which treats input data as stochastic variables, is introduced. It can analyze the tolerances from the electrical point of view and find a robust optimal solution that has insensitive performance on its change of the design variables by applying the optimization technique. A surface permanent-magnet BLDC motor is used to confirm the validity of this method. It must be noted that the statistical torque characteristics analyzed by SRSM has a great advantage in the design and manufacture stage over conventional method.     

Removing escrow from ciphertext policy attribute-based encryption

Attribute-based encryption (ABE) is a promising cryptographic primitive for fine-grained access control of distributed data. In ciphertext policy attribute-based encryption (CP-ABE), each user is associated with a set of attributes and data are encrypted with access policies on attributes. A user is able to decrypt a ciphertext if and only if his attributes satisfy the access policy embedded in the ciphertext. However, key escrow is inherent in ABE systems. A curious key generation center in that construction has the power to decrypt every ciphertext. We found that most of the existing ABE schemes depending on a single key authority suffer from the key escrow problem. In this study, we propose a novel CP-ABE key issuing architecture that solves the key escrow problem. The proposed scheme separates the power of issuing user keys into two parties: the key generation center and the attribute authority. In the proposed construction, the key generation center and the attribute authority issue different parts of secret key components to users through a secure two-party computation protocol such that none of them can determine the whole set of keys of users individually. We demonstrate how the proposed key issuing protocol can be applied in the existing CP-ABE scheme and resolve the key escrow problem.