Gamma‐ray irradiation effect of polyethylene on dimaleimides as a class of new multifunctional monomers

Multifunctional monomers, m‐xylylenedimaleimide, p‐phenylenedimaleimide, m‐phenylenedimaleimide, and p‐phenylenedinadimide, all of which have maleimide groups, were synthesized to increase thermal and radiation stabilities. The synthesized multifunctional monomers showed good compatibility with low‐density polyethylene (LDPE). Mixtures of LDPE and these multifunctional monomers were irradiated with γ‐rays from a Co‐60 source at room temperature in a nitrogen atmosphere. The absorbed dose ranged from 0 to 160 KGy. Among these multifunctional monomers, m‐xylylenedimaleimide was the best in gel fraction enhancement. Crosslinked LDPE with m‐xylylenedimaleimide displayed a higher modulus than that of crosslinked LDPE with triallyl cyanurate. For the elongation property, LDPE with m‐xylylenedimaleimide as a multifunctional monomer showed better results than that with commercial multifunctional monomers such as triallyl cyanurate (TAC) and trimethylol propane triacrylate (TMPTA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2339–2345, 2003     

Synthesis and modification of a trifunctional epoxy resin with amino-terminated poly(dimethylsiloxane)s for semiconductor encapsulation

A high-performance trifunctional epoxy resin based on the triglycidyl ether of tris (4-hydroxyphenyl)-methane (TETM) was synthesized by the condensation of 4-hydroxybenzaldehyde with phenol followed by epoxidation with epichlorohydrin. The structure of TETM was confirmed by mass spectra, infrared and nuclear magnetic resonance spectroscopy. Amino-terminated poly(dimethylsiloxane)s were used to reduce the stress of the trifunctional epoxy resin cured with phenolic novolac resin for electronic encapsulation application. The dispersed silicone rubbers effectively reduce the stress of cured epoxy resins by reducing the coefficient of thermal expansion and flexural modulus while the glass transition temperature was hardly depressed.     

纳米粉体制程在线粒径测量系统的研发

发展了一套在线光纤式动态光散射粉体粒径测量系统,作为纳米颗粒制程粒径参数测量与分析.工业上对纳米粉体性质均一性(Uniformity)要求较高,为了获得在线制备纳米粉体颗粒的精确粒径大小与分布,本研究由激光动态光散射(Dynamic Light Scattering,DLS)原理,利用光纤探头方式,研制了一套在线粉体取样与粒径测量系统,针对目前台北科大自行研发的真空潜伏纳米流体制程(SANSS)进行了系统整合与测试.本研究针对100 nm标准粒径大小的聚苯乙烯(Polystyrene)粉体进行系统测量能力评估,确定了研发系统测量准确度(Accuracy)与重现性(Repeatability).实验结果显示,研发系统测量的平均粒径最大误差值在8%以下,初步确定测量系统可有效地监控纳米流体制程,提供纳米粉体制程的重要在线信息.     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

Optimal process conditions of shrinkage and warpage of thin‐wall parts

Optimal process conditions of thin‐wall injection molding of a cellular phone cover were investigated with the consideration of interaction effects between process parameters. L₂₇ experimental tests based on Taguchi's method were performed, and then Cyclone Scanner, PolyCAD and PolyWorks were used to measure the shrinkage and warpage of the thin‐wall injected parts to determine the optimal process conditions. Based on the results of the analysis of variables and the F‐test, interaction effects for each observed factor were determined. The results indicated that the packing pressure was the most important process parameter affecting the shrinkage and warpage of the thin‐wall part. The optimal process conditions were different for the shrinkage and the warpage. This was because during the injection process, the mechanisms affecting shrinkage or warpage were different. Compared with the results obtained with simplified thin‐wall parts in the literature, it was found that the geometry of a real commercial part did affect the optimal process conditions and the order of influence of process parameters. The optimal process conditions determined by Taguchi's method for reducing the shrinkage and warpage were verified experimentally in this work. Polym. Eng. Sci. 44:917–928, 2004. © 2004 Society of Plastics Engineers.     

Kinetic parameters estimation for cure reaction of epoxy based vinyl ester resin

A new graphical estimation technique is proposed for the determination of the kinetic parameters describing an autocatalytic reaction. A differential scanning calorimeter was used to monitor the reaction kinetics of an epoxy-based vinyl ester resin. The method utilizes information from a zero initial reaction rate, conversation at vitrification, the ratio of reaction rate constants under different isothermal conditions, and characteristics of the phenomenological kinetic model with assumptions being made about the overall reaction order. By fitting data to the integrated reaction rate equation with adjustments for the isothermal conditions, the kinetic parameters are estimated without using a linear or nonlinear regression method. Different kinetic parameters can be estimated from data before and after the gel point which was obtained from the relationship between the glass transition temperature and the degree of cure.     

Production of human normal adult and fetal hemoglobins in Escherichia coli

A hemoglobin expression system in Escherichia coli is described. In order to produce authentic human hemoglobin, we need to co-express both methionine aminopeptidase and globin genes under the control of a strong promoter. We have constructed three plasmids, pHE2, pHE4 and pHE7, for the expression of human normal adult hemoglobin and a plasmid, pHE9, for the expression of human fetal hemoglobin, in high yields. The globin genes can be derived from either synthetic genes or human globin cDNAs. The extra amino-terminal methionine residues of the expressed globins can be removed by the co-expressed methionine aminopeptidase. The heme is inserted correctly into the expressed alpha- globin from our expression plasmids. A fraction (approximately 25%) of the heme is not inserted correctly into the expressed beta- or gamma- globin. However, the incorrectly inserted hemes can be converted into the correct conformation by carrying out a simple oxidation-reduction process on the purified hemoglobin molecule. We have investigated the functional properties of the expressed hemoglobins by measuring their oxygen-binding properties and their structural features by obtaining their 1H-NMR spectra. Our results show that authentic human normal adult and fetal hemoglobins can be produced from our expression plasmids in E. coli and in high yields. Our expression system allows us to design and to produce any recombinant hemoglobins needed for our research on the structure-function relationship in hemoglobin.      

Solid extraction of caffeine and theophylline from green tea by molecular imprinted polymers

This paper involves a feasibility study on using molecular imprinted polymers as the sorbent materials in solid phase extraction for caffeine and theophylline from green tea. Two kinds of MIPs, with caffeine-theophylline mixture and pentoxifylline-theophylline mixture as the templates respectively, MAA as the monomer, EDMA as the crosslinker and ATBN as the initiator, were applied to this purpose. Mixture solution of caffeine and theophylline (1 Μg/ ml in acetonitrile) was applied to the solid extraction cartridges following a load, wash and elute procedure with acetonitrile, methanol, methanol-acetic acid (90/10, v/v) as the solvents, respectively. This solid phase extraction protocol was applied for extraction of caffeine and theophylline from green tea. Comparison between the results obtained with the MIPs cartridges and a traditional C₁₈ reversed-phase cartridge was made. It showed that the MIP-based sorbent on the solid phase extraction was comparable with that of C₁₈ material. HPLC analysis using a C₁₈ column (5 Μm, 250× 4.6 mm from Rstech corporation), methanol: water (60 :40, v/v) as the mobile phase at a flow rate of 0.6 ml/min was applied for the quantitative determination.     

Numerical study of coal particle cluster combustion under quiescent conditions

Behavior of ignition and combustion of coal particle cluster under a quiescent condition was numerically simulated by solving balance equations of mass and enthalpy with combustion kinetic models of volatiles and char. Two-flame structure, one flame penetrating into the cluster and the other moving out of the cluster, was predicted during the combustion of coal particle cluster. Effects of radiative heat transfer, group number, ambient temperature, coal particle size, and oxygen concentration on ignition and combustion of coal particle clusters were also analyzed. Simulations indicated that the gas volume fraction of coal particle cluster increases with time after devolatilization. Gas velocity passing through the cluster surface varied significantly at volatile liberation. The ignition time delay was reduced with the increase of ambient temperature. The cluster devolatilization rate and char burning rate increased while the ignition time delay decreased with the increase of ambient oxygen concentration.     

Mobile phase composition for resolving whey proteins in reversed-phase high performance liquid chromatography

Reversed-phase high-performance liquid chromatography was successfully developed for the simultaneous and rapid separation for the main whey proteins, α-Lactalbumin and β-Lactoglobulin. This method consisted of a linear gradient of the two mobile phases of 0.1% trifluoroacetic acid in water and 0.1% trifluoroacetic acid in acetonitrile. The total run time for this separation was approximately 30 min, and α-Lactalbumin was eluted followed byβ- Lactoglobulin. The injection volume was fixed at 20 μl and the flow rate was 1 ml 1/min. The optimum mobile phase composition and gradient conditions to separate α-Lactalbumin and β-Lactoglobulin (A+B) were experimentally obtained at the 15 μm particle with a pore size of 300 Å on the linear-gradient mode.