Some blind FRESH equalization algorithms with anti-interference capabilities

Some novel blind FREquency-SHift （FRESH） equalizer algorithms are proposed for the equalization of Finite Impulse Response （FIR） single channel with anti-interference capabilities. These algorithms based on FRESH filter can work well without any training sequence. Simulation results show that the equalizer algorithms can effectively reject many types of interferences and the performances of these new equalizer algorithms are superior to the conventional equalizer algorithms.     

不同空穴阻挡材料对白色OLED性能的影响

采用Alq3、TPBi和BCP分别作为电子传输材料和空穴阻挡材料,制备了三种器件,研究了用不同的空穴阻挡材料对器件性能的影响。实验结果表明:只采用30nm Alq3作电子传输层的器件的电流效率最大值为7.84cd/A(9V),而采用10nm Alq3作电子传输层,插入20nm的BCP和TPBi作空穴阻挡层的器件获得的电流效率最大值分别为9.72cd/A和12.21cd/A(9V)。这些结果说明空穴阻挡材料能改善器件的性能,TPBi比以BCP作为空穴阻挡层的器件性能有了很大的改善,制备的白色OLED的最大亮度和电流效率分别为22400cd/m2(17V)和12.21cd/A(9V)。     

基于无线传感器网络的农业环境监测系统

针对当前农业环境在线监测的需要,提出了一种利用具有自组织特性的无线传感器网络(wireless sensor networks,WSN)对温度、土地湿度和土壤的PH值等环境变量进行在线监测的方法.该方法采用了对等式网络体系结构、低功耗微小网络节点、基于拓扑树的网络初始化配置算法.实验测试表明节点能够有效地采集和处理数据,并可以在节点间成功地进行通信.     

Demonstration of a 4-Sensor Folded Sangac Sensor Array with Active Phase Biasing Scheme

A 4-sensor folded Sagnac sensor array with an active phase biasing scheme is presented. The overlapping of the signal and noise pulse is avoided through a time division multiplexing scheme and the noise pulses is eliminated almost completely. The scheme can address 16 sensors when the repeat frequency of input pulse is at 68.3 kHz. The alternative phase bias technique is demonstrated, which can provide sensors with stable phase bias. The future benefit of this technique is that the 1/f noise in the circuit can be suppressed.     

Walsh coded training signal aided time domain channel estimation for MIMO-OFDM systems

This letter proposes a novel Walsh coded training signal design and decoding method to estimate the channel response in MIMO-OFDM systems. The Walsh coded training signals, designed to be orthogonal in the time domain, facilitate the separation of the desired training signal from the received mixed signal and the estimation of the channel response. The proposed channel estimation method is directly applicable to practical MIMO-OFDM systems with null subcarriers and exhibits nearly the same performance as Li?s original channel estimator [5] at a much reduced computational complexity.     

Extraction of interface states at emitter–base heterojunctions in AlGaAs/GaAs heterostructure bipolar transistors using sub-bandgap photonic excitation

Distribution of interface states at the emitter–base heterojunctions in heterostructure bipolar transistors (HBTs) is characterized by using current–voltage characteristics using sub-bandgap photonic excitation. Sub-bandgap photonic source with a photon energy E_ph which is less than the energy bandgap E_g (E_g,GaAs = 1.42, E_g,AlGaAs = 1.76 eV) of emitter, base, and collector of HBTs, is employed for exclusive excitation of carriers only from the interface states in the photo-responsive energy range at emitter–base heterointerface. The proposed method is applied to an Al_0.3Ga_0.7As/GaAs HBT (A_E = W_E × L_E = 250 × 100 μm²) with E_ph = 0.943 eV and P_opt = 3 mW. Extracted interface trap density D_it was observed to be D_it,max  4.2 × 10¹² eV⁻¹ cm⁻² at emitter–base heterointerface.     

Crystal Facet Engineering of Single-Crystalline TiC Nanocubes for Improved Hydrogen Evolution Reaction

Single-crystalline {100} faceted TiC is of great significance in theory to a large number of engineering applications owing to its extraordinary catalytic properties. However, the {111} planes are prevalent in conventional TiC powders given their favorable thermodynamic stability during the initial low stoichiometric growth stage. Herein, a disproportionation–decomposition strategy is developed to directly produce Ti and C atoms to synthesize single-crystalline {100} faceted TiC powders. Outstanding electrochemical performance of TiC {100} crystal planes in terms of the hydrogen evolution reaction is evidenced by an overpotential of 392 mV at 10 mA cm⁻², which is 52% lower than that of randomly faceted TiC counterparts (815 mV).     

Nanowire-Based Soft Wearable Human–Machine Interfaces for Future Virtual and Augmented Reality Applications

A virtual world has now become a reality as augmented reality (AR) and virtual reality (VR) technology become commercially available. Similar to how humans interact with the physical world, AR and VR systems rely on human–machine interface (HMI) sensors to interact with the virtual world. Currently, this is achieved via state of-the-art wearable visual and auditory tools that are rigid, bulky, and burdensome, thereby causing discomfort during practical application. To this end, a skin sensory interface has the potential to serve as the next-generation AR/VR technology because skin-like wearable sensors have advantages in that they can be ultrathin, ultra-soft, conformal, and imperceptible, which provides the ultimate comfort and immersive experience for users. In this progress report, nanowire-based soft wearable HMI sensors including acoustic, strain, pressure sensors, and physiological sensors are reviewed that may be adopted as skin sensory inputs in future AR/VR systems. Further, nanowire-based soft contact lenses, haptic force, and thermal and vibration actuators are covered as potential means of feedback for future AR/VR systems. Considering the possible effects of the virtual world on human health, skin-like wearable artery pulses, glucose, and lactate sensors are also described, which may enable imperceptible health monitoring during future AR/VR practices.     

High Mobility 3D Dirac Semimetal (Cd3As2) for Ultrafast Photoactive Terahertz Photonics

The Dirac semimetal cadmium arsenide (Cd₃As₂), a 3D electronic analog of graphene, has sparked renewed research interests for its novel topological phases and excellent optoelectronic properties. The gapless nature of its 3D electronic band facilitates strong optical nonlinearity and supports Dirac plasmons that are of particular interest to realize high-performance electronic and photonic devices at terahertz (1 THz = 4.1 meV) frequencies, where the performance of most dynamic materials are limited by the tradeoff between power-efficiency and switching speed. Here, all-optical, low-power, ultrafast broadband modulation of terahertz waves using an ultrathin film (100 nm, λ/3000) of Cd₃As₂ are experimentally demonstrated through active tailoring of the photoconductivity. The measurements reveal the photosensitive metallic behavior of Cd₃As₂ with high terahertz electron mobility of 7200 cm² (Vs)⁻¹. In addition, optical fluence dependent ultrafast charge carrier relaxation (15.5 ps), terahertz mobility, and long momentum scattering time (157 fs) comparable to superconductors that invoke kinetic inductance at terahertz frequencies are demonstrated. These remarkable properties of 3D Dirac topological semimetal envision a new class of power-efficient, high speed, compact, tunable electronic, and photonic devices.     

Thiol-Functionalized Covalent Organic Frameworks as Thermal History Indictor for Temperature and Time History Monitoring

Various products, including foods and pharmaceuticals, are sensitive to temperature fluctuations. Thus, temperature monitoring during production, transportation, and storage is critical. Facile indicators are required to monitor temperature conditions via color changes in real time. This study aimed to prepare and apply thiol-functionalized covalent organic frameworks (COFs) as a novel indicator for monitoring thermal history and temperature abuse. The COFs underwent obvious color changes from bright yellow to purple after exposure to different temperatures for varying durations. The reaction kinetics are analyzed under isothermal conditions, which reveal that the order of reaction rates is k_−20°C < k_4°C < k_20°C < k_35°C < k_55°C. The activation energy (E_a) of the COFs is calculated using the Arrhenius equation as 50.71 kJ moL⁻¹. The COFs are capable of sensitive color changes and offer a broad temperature tracking range, thereby demonstrating their application potential for the monitoring of temperature and time exposure history during production, transportation, and storage. This excellent performance thermal history indicator also shows promise for expanding the application field of COFs.