Nonlinear Failure Criterion and Passive Thrust on Retaining Walls

The effect of nonlinearity of the failure criterion on the passive thrust on smooth and rough vertical retaining walls is studied theoretically. Limit analysis upper bound estimates based on block-type failure mechanisms are constructed. An alternative, a priori linearization, approach is discussed. It is shown that for smooth walls both approaches, as well as the Rankine-type slip line solution, yield similar results. For rough walls, however, the ambiguity in the a priori linearization makes it difficult to compare the results. This deficiency is absent in the limit analysis nonlinear solutions.     

Development of a Shape‐Memory Tube to Prevent Vascular Stenosis

Inserting a graft into vessels with different diameters frequently causes severe damage to the host vessels. Poor flow patency is an unresolved issue in grafts, particularly those with diameters less than 6 mm, because of vessel occlusion caused by disturbed blood flow following fast clotting. Herein, successful patency in the deployment of an ≈2 mm diameter graft into a porcine vessel is reported. A new library of property‐tunable shape‐memory polymers that prevent vessel damage by expanding the graft diameter circumferentially upon implantation is presented. The polymers undergo seven consecutive cycles of strain energy‐preserved shape programming. Moreover, the new graft tube, which features a diffuser shape, minimizes disturbed flow formation and prevents thrombosis because its surface is coated with nitric‐oxide‐releasing peptides. Improved patency in a porcine vessel for 18 d is demonstrated while occlusive vascular remodeling occurs. These insights will help advance vascular graft design.     

A critical heat flux model based on mass, energy, and momentum balance for upflow boiling at low qualities

A mechanistic modeling of critical heat flux (CHF) in upflow boiling at low qualities is performed. The developed model is based on a physical criterion of CHF occurrence and a mechanism limiting the thermal transport between a stagnant bubbly layer and bulk stream. The mechanism can be mathematically formulated by coupling the equation of limiting mixing mass flux, which is derived from momentum balance equations in two regions, with local mass and energy balance equations on the bubbly layer. The resulting form of the model is represented by a general and straightforward CHF formula involving two empirical constants related to the void fraction and the thickness of the bubbly layer. The predictions agree well with the extensive CHF data of water in uniformly heated tubes.     

Cytotoxic Petrosiacetylenes from the Marine Sponge Petrosia sp.

A novel petrosiacetylene analog (petrosiacetylene E) has been isolated from the Korean marine sponge Petrosia sp., along with petrosiacetylene A, B and C. Their structures were elucidated on the basis of spectroscopic methods and the stereochemistry of the new compound was determined by using the modified Mosher’s method. Petrosiacetylene E showed higher cytotoxicity against five human cancer cell lines than petrosiacetylene A and B, presumably due to the additional hydroxy group located at C-16.     

Preparation and evaluation of poly(2-hydroxyethyl aspartamide)-hexadecylamine-iron oxide for MR imaging of lymph nodes

The purpose of this study was to synthesize biocompatible poly(2-hydroxyethyl aspartamide)–C₁₆-iron oxide (PHEA-C₁₆-iron oxide) nanoparticles and to evaluate their efficacy as a contrast agent for magnetic resonance imaging of lymph nodes. The PHEA-C₁₆-iron oxide nanoparticles were synthesized by coprecipitation method. The core size of the PHEA-C₁₆-iron oxide nanoparticles was about 5 to 7 nm, and the overall size of the nanoparticles was around 20, 60, and 150 nm in aqueous solution. The size of the nanoparticles was controlled by the amount of C₁₆. The 3.0-T MRI signal intensity of a rabbit lymph node was effectively reduced after intravenous administration of PHEA-C₁₆-iron oxide with the size of 20 nm. The in vitro and in vivo toxicity tests revealed the high biocompatibility of PHEA-C₁₆-iron oxide nanoparticles. Therefore, PHEA-C₁₆-iron oxide nanoparticles with 20-nm size can be potentially useful as T2-weighted MR imaging contrast agents for the detection of lymph nodes.     

Preparation and properties of branched polybutylenesuccinate

To obtain long branched polybutylene succinate (PBS), modified PBSs were prepared by introducing a branching agent, trimethylol propane (TMP), to the polycondensation system of succinic acid and 1,4‐butanediol. Molecular parameters such as absolute molecular weight and root‐mean‐square (RMS) radius of the modified PBSs were measured by gel permeation chromatography (GPC) with a multiangle laser light‐scattering (MALLS) detector. The RMS radius of TMP05, PBS prepared by incorporating 0.5 wt % TMP during polycondensation, was the smallest of all PBSs tested at the same molecular weight. The notable shear thinning and much reduced loss tangent for TMP05 qualitatively supported the difference in their molecular structures predicted by GPC. The analytical results indicated that introducing 0.5 wt % TMP produced PBS with chain branches long enough to produce molecular entanglements. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1388–1394, 2001     

Piezoelectric Properties of 0.2[Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)]-0.8[PbTiO<Subscript>3</Subscript>-PbZrO<Subscript>3</Subscript>] Ceramics Sintered at a Low Temperature with the Aid of Li<Subscript>2</Subscript>O

The dielectric and piezoelectric properties of 0.2Pb(Mg_1/3Nb_2/3)O₃-0.8Pb(Zr_0.475Ti_0.525)O₃ (abbr. as PMNZT) ceramics were measured. Extremely low sintering temperatures of 950^∘C using liquid-phase sintering aid of Li₂O is achieved which was very useful for multi-layered applications. X-ray study shows the splitting of rhombohedral (200) in pure PMNZT to (002) and (200) peaks in Li₂O doped samples. 10 times higher dielectric constant was achieved in Li₂O doped samples to compare to pure ones although the Curie temperature (T_c = 322^∘C) of Li₂O doped PMNZT ceramics was not changed. The value of k_p and k₃₃ increased up to 0.1 wt% of Li₂O and saturating thereafter.     

Electrical conductivity of the Al-stabilized La<Subscript>2/3</Subscript>TiO<Subscript>3</Subscript>

A-site deficient lanthanum titanate (La_2/3TiO₃) materials with perovskite structure are attractive due to their electrical applications such as ion conductors and dielectrics. However, its stability at room temperature in air is obtained only if Na or Li etc. is incorporated into La site or Al into Ti site. In this study, the electrical conductivities of La_0.683(Ti_0.95Al_0.05)O₃ have been measured in oxygen partial pressure (Po₂) between 1 and 10⁻¹⁸ atm at 1000~1400°C. The electrical conductivity exhibited −1/4, −1/6 and −1/5 dependence (log σ ∝ log , n = −1/4, −1/6, −1/5) depending upon temperature and Po₂. The defect model explaining the observation was proposed and discussed. The chemical diffusion coefficient was estimated from the electrical conductivity relaxation.     

Fe-doped LaCoO<Subscript>3</Subscript> perovskite catalyst for NO oxidation in the post-treatment of marine diesel engine’s exhaust emissions

New post-treatment process for marine diesel engine exhaust emissions was proposed by combining NO oxidation and wet scrubbing technology for the simultaneous removal of SO_X, NO_X and PM. NO, insoluble in aqueous scrubbing absorbent, is preferentially oxidized to NO₂, which then turns fully soluble in it. Fe substituted LaCo_1-xFe_xO₃ perovskite catalysts were developed for NO oxidation to NO₂. The catalysts were prepared by co-precipitation method and analyzed with XRD, XRF, BET, FT-IR, NO-TPD and XPS techniques. Crystal structure change from rhombohedral to orthorhombic was observed with the increased amount of Fe substituted in the B site of the perovskite by XRD analysis. From FT-IR and NO-TPD analysis, nitrate on perovskite species was found to be the active species for NO oxidation. Quantitative analysis was performed within the prepared catalysts. Catalytic activity was measured using a packed bed reactor operated at 150–400 °C, atmospheric pressure and with gas hourly space velocity (GHSV) of 20,000 h^-1 using a simulated exhaust gas composed of NO 400 ppm, O₂ 10% balanced with N2. Formation of Fe⁴⁺ cation enhanced the redox property as well as the mobility of the lattice oxygen present in the perovskite catalysts, confirmed by XPS analysis. Reaction mechanism of NO oxidation on Fe substituted LaCo_1-xFe_xO₃ was discussed based on Mars-van Krevelen mechanism.