Impact of power-supply noise on timing in high-frequency microprocessors

This paper analyzes the impact of power-supply noise on the performance of high-frequency microprocessors. First, delay models that take this noise into account are proposed for device-dominated and interconnect-dominated timing paths. For typical circuits, it is shown that the peak of the noise is largely irrelevant and that the average supply voltage during switching is more important. It is then argued that global differential noise can potentially have a greater timing impact than common-mode noise. Finally, realistic values for the model parameters are measured on a 2.53-GHz Pentium4 microprocessor using a 130-nm technology. These values imply that the power-supply noise present on the system board reduces clock frequency by 6.7%. The model suggests that the frequency penalty associated with this power-supply noise will steadily increase and reach 7.6% for the 90-nm technology generation.     

Adaptive source-channel subband video coding for wireless channels

This paper presents a general framework for combined source-channel coding within the context of subband coding. The unequal importance of subbands in reconstruction of the source is exploited by an appropriate allocation of source and channel coding rates for the coding and transmission of subbands over a noisy channel. For each subband, the source coding rate as well as the level of protection (quantified by the channel coding rate) are jointly chosen to minimize the total end-to-end mean-squared distortion suffered by the source. This allocation of source and channel coding rates is posed as a constrained optimization problem, and solved using a generalized bit allocation algorithm. The optimal choice of source and channel coding rates depends on the state of the physical channel. These results are extended to transmission over fading channels using a finite state model, where every state corresponds to an additive white Gaussian noise (AWGN) channel. A coding strategy is also developed that minimizes the average distortion when the channel state is unavailable at the transmitter. Experimental results are provided that demonstrate application of these combined source-channel coding strategies on video sequences     

A general enthalpy method for modeling solidification processes

In the present work, a general implicit source-based enthalpy method is presented for the analysis of solidification systems. The proposed approach is both robust and efficient. The performance of the method is illustrated by application to a number of problems taken from recent metallurgical literature.     

The 3DP: a processor architecture for three-dimensionalapplications

The 3DP (3-Dimensional Processor), a parallel-computing architecture that targets problems that have a 3-D numerical structure and require numerous calculations on 3-D vectors, is described. The 3DP architecture differs from traditional scalar architectures in that it operates directly on vectors. It differs from general parallel architectures in that it can solve problems that predict the behavior of highly coupled systems, and it differs from vector architectures in that it runs efficiently on length-3 vectors. Object-oriented programming on the 3DP and programming the 3DP in C++ are discussed. 3DP performance is reviewed, and the current implementation of the 3DP architecture, as an attached processor that plugs directly into Sun host VMEbus, is described     

Analysis of Caching and Replication Strategies for Web Applications

Developers often use replication and caching mechanisms to enhance Web application performance. The authors present a qualitative and quantitative analysis of state-of-the art replication and caching techniques used to host Web applications. Their analysis shows that selecting the best mechanism depends heavily on data workload and requires a careful review of the application's characteristics. They also propose a technique for Web practitioners to compare different mechanisms' performance on their own     

Hardness-stress-strain correlation in aluminium—A simpler alternative to visioplasticity in metal forming

Local stress and strain variations in the deformation zone can be ascertained by measuring hardness. Hardness is correlated with strain and stress. The expressions discussed later are useful in determining the local variations in stress and strain from hardness measurement. It is a simple method compared to visioplasticity. One can estimate the forces required for a forming process. It helps in the choice of equipment, design of tooling and selection of lubricant for the particular process.     

Thermal stability and high-temperature wear of Ti–TiN and TiN–CrN nanomultilayer coatings under self-mated conditions

Ti–TiN and TiN–CrN nanomultilayers were thermally stable retaining uniform and sharp layer interfaces up to 24 h at 773 K, without any oxidation or phase transformation accompanying each individual layer. Decreasing the multilayer spacing resulted in an increase in the hardness in both cases. The coating hardness was found to be independent of the substrate type, when applied on HS718, Ti64 and HCHCr substrates. In scratch testing, the multilayers displayed a better resistance to the onset of failure, as compared to the monolayer TiN. The substrate plasticity played an important role in determining the coating failure mode. Self-mated wear tests revealed the CrN–TiN system to exhibit the best wear behaviour, both at room temperature and at 773 K. The Ti–TiN coatings are more accommodative with all three substrates, as compared to TiN–CrN and TiN.     

A packet delay analysis for cellular digital packet data

We formulate and analyze a model of voice and data burst traffic for cellular digital packet data (CDPD). To develop a tractible model, we make some reasonable simplifying assumptions to model the voice traffic and one of the logical CDPD channels as an M/M/1 queue in a random environment. Rather than explicitly solve the resulting matrix quadratic equation, we develop an asymptotic analysis that gives us simple approximate formulas (with error bounds) for many performance measures of interest. In particular, one metric that we highlight comes from using our approximate mean data burst delay formula to characterize the performance of a set of interacting logical CDPD channels. We do so by describing it in terms of an equivalent number of independent, dedicated CDPD channels, We can use this metric to suggest what the optimal number of logical CDPD channels for a given system should be     

A survey of sensory data boundary estimation,covering and tracking techniques using collaborating sensors

Boundary estimation and tracking have important applications in the areas of environmental monitoring and disaster management. A boundary separates two regions of interest in a phenomenon. It can be visualized as an edge if there is a sharp change in the field value between the two regions or alternatively, as a contour with a field value $f=\tau$ separating two regions with field values $f>\tau$ and $f<\tau$. Examples include contours/boundaries of hazardous concentration in a pollutant spill, frontal boundary of a forest fire, isotherms, isohalines etc. Recent advances in the area of embedded sensor devices and robotics have led to deployments of networks of sensors capable of sensing, computing, communication and mobility. They are used to estimate the boundaries of interest in physical phenomena, monitor or track them over time and also in some cases, mitigate the spatial spread of the phenomena. Since these sensors work autonomously in the environment, minimizing the energy consumed while maximizing the accuracy of estimation or tracking is the main challenge for algorithms for boundary estimation and tracking. Several algorithms with these objectives have been proposed in the literature. In this work, we focus on the algorithms that estimate and cover boundaries found in the sensory data in a field and not the topological boundary of the sensor network per se, which is beyond the scope of this paper.Here, our objective is to provide a comprehensive survey of the algorithms for boundary estimation and tracking by providing a taxonomy based on two broad categories — (i) Boundary estimation and tracking, where the sensors estimate the boundary without physically covering the boundary and (ii) Boundary covering — where the sensors not only predict the location and estimate the entire boundary but also physically cover the boundary by surrounding and bounding it. We further classify the techniques based on (a) sensing capabilities —in situ, range or remote sensing (b) movement capabilities — static or mobile sensors and (c) boundary type — static or dynamic and (d) type of estimation — field estimation where the entire field is sampled to search for contours and localized estimation where sampling is done near the boundary and (e) different types of mobility models in the case of mobile sensors. We believe that such a survey has not been performed before. By capturing and classifying the current state-of-the-art and identifying open research problems, we hope to ignite interest and stimulate efforts towards promising solutions for real-world boundary estimation and tracking problems.