Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

基于决策树方法的油炸型方便面品质评价研究

本实验以市场占有率为80%～90%的国内主要方便面生产厂家的12个主打品牌的205个油炸型方便面样品为研究对象,首先以8个专家感官评价项目为指标,采用K-均值法对感官品评数据进行了聚类分析;根据聚类分析结果再应用决策树分析方法,以15个物性检测项目为指标,建立感官品评和面条物性指标之间关系模型。结果表明,所建立的决策树模型吻合感官品评聚类结果的精度达到95.61%,实现了表达仪器测量值与感官品评之间关系的目的,可为油炸型方便面品质评价提供一种客观定量化的方法。     

Flexibilized Copolyimide Adhesives

Two copolyimides, LARC-STPI and STPI-LARC-2, with flexible backbones were prepared and characterized as adhesives. The processability and adhesive properties were compared to those of a commercially available form of LARC-TPI.

Lap shear specimens were fabricated using adhesive tape prepared from each of the three polymers. Lap shear tests were performed at room temperature, 177°C, and 204°C before and after exposure to water-boil and to thermal aging at 204°C for up to 1000 hours.

The three adhesive systems possess exceptional lap shear strengths at room temperature and elevated temperatures both before and after thermal exposure. LARC-STPI, because of its high glass transition temperature provided high lap shear strengths up to 260°C. After water-boil, LARC-TPI exhibited the highest lap shear strengths at room temperature and 177°C, whereas the LARC-STPI retained a higher percentage of its original strength when tested at 204°C [68% versus 50% (STPI-LARC-2) and 40% (LARC-TPI)].

These flexible thermoplastic copolyimides show considerable potential as adhesives based on this study and because of the ease of preparation with low cost, commercially available materials.     

Flow behavior of concentrated solutions of an SBS block copolymer

The non-Newtonian viscosity of concentrated solutions of a styrene-butadiene-styrene, SBS, block copolymer was measured with a novel capillary viscometer. Polymer concentrations ranged from 0.165 to 0.306 g/cc. Apparent shear rates ranged from 1 to 10⁵ sec^?1. Five different solvents were employed. All of the flow curves can be reduced to a single master curve with the same shape exhibited by monodisperse polystyrenes and the Graessley theory. The shift factor for the shear rate axis, τ₀, approximately parallels the Rouse relaxation time, τ_R, but shows a residual concentration and solvent dependence not predicted by the Rouse form. For different solvents at the same concentration, better solvents show a minimum relative zero shear viscosity, η₀/η_s, and a maximum ratio τ_R/τ₀. It is concluded that all solvent effects are not adequately incorporated into the zero shear viscosity for the purposes of constructing master plots; however, the shape of the master plot is not affected by the solvent or the polymer block structure.     

Basic sites on mixed nitrided galloaluminophosphates “AlGaPON”: infrared studies of SO2 and CDCl3 adsorption

The basic properties of nitrided galloaluminophosphate “AlGaPON” are documented by FTIR of sulphur dioxide and deuterated chloroform. To evidence the increase in the number of basic sites with nitrogen enrichment, we compared the spectra recorded after adsorption of CDCl₃ on the phosphate precursor “AlGaPO” and on four oxynitrides with increasing nitrogen contents. On the oxide, adsorption arises from CDCl₃ interacting with surface hydroxyl groups, on the oxynitrides basic sites are shown to be M–NH₂ groups. This interpretation is confirmed by FTIR of adsorbed SO₂. This revised version was published online in July 2006 with corrections to the Cover Date.     

Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools

Inconel 718 is known to be among the most difficult-to-machine materials due to its special properties which cause the short tool life and severe surface damages. The properties, which are responsible for poor machinability, include rapid work hardening during machining; tendency to weld with the tool material at high temperature generated during machining; the tendency to form a built-up edge during machining; and the presence of hard carbides, such as titanium carbide and niobium carbide, in their microstructure. Conventional method of machining Inconel 718 with cemented carbide tool restricts the cutting speed to a maximum 30?m/min due to the lower hot hardness of carbide tool, high temperature strength and low thermal conductivity of Inconel 718. The introduction of new coated carbide tools has increased cutting speed to 100?m/min; nevertheless, the time required to machine this alloy is still considerably high. High speed machining using advanced tool material, such as CBN, is one possible alternative for improving the productivity of this material due to its higher hot hardness in comparison with carbide tool. This paper specifically deals with surface quality generated under high speed finishing turning conditions on age-hardened Inconel 718 with focus on surface roughness, metallographic analysis of surface layer and surface damages produced by machining. Both coated and uncoated CBN tools were used in the tests, and a comparison between surfaces generated by both tools was also discussed.     

Renal pathologies in giant toads (Bufo marinus) vary with land use

A variety of human land uses involve the release of toxins into the environment. Wildlife live alongside humans across this array of land uses and thus, are exposed to varying chemical milieus. Kidneys are the principle excretory organs for vertebrates and excessive or chronic exposure to exogenous toxins can lead to renal pathology and renal failure. Although studies have linked chemical exposure to specific renal diseases across diverse taxa, none compare renal lesions occurring in wildlife living in different types of human-modified landscapes. We identify lesions characteristic of renal stress, including toxin exposure, in 82 giant toad (Bufo marinus) males living in habitats ranging from suburban to agricultural. In a previous study [McCoy K.A., Bortnick L.J., Campbell C.M., Hamlin H.J., Guillette L.J., Jr., St. Mary C.M. Agriculture Alters Gonadal Form and Function in Bufo marinus. Environ Health Persp; in press.], these individuals were examined for gonadal abnormalities, which were significantly and positively associated with percentage of agriculture at the collection site. Thus, we hypothesized the same association for renal abnormalities. We scored gross anatomical abnormalities and used light microscopy to identify tubular and interstitial lesions that have been associated with toxicant exposure in other organisms, including humans. Renal lesions indicative of tubular disease were observed at one suburban and two agricultural sites, whereas interstitial lesions were most severe at one agricultural site. Although there was no relationship between frequency of renal disease and proportion of agriculture in the collection vicinity, the renal lesions we identify are consistent with toxin exposure and are similar to those found in human drug abusers and patients suffering medication-induced nephropathy. This is the first study to describe renal lesions in a wild amphibian species and investigate the distribution of renal lesions across human altered landscapes. Indentifying the chemicals inducing renal lesions across these landscapes, their toxicological mechanisms, and their implications on wildlife health will help us devise strategies to mitigate the impacts of toxins on humans and animals living in human-modified environments.     

Recent Developments in the Field of Thermal Barrier Coatings

Conventional thermal barrier coating (TBC) systems consist of a duplex structure with a metallic bondcoat and a ceramic, heat-isolative topcoat. Several recent research activities are concentrating on developing improved bondcoat or topcoat materials; for the topcoat especially, those with reduced thermal conductivity are investigated. Using advanced topcoat materials, the ceramic coating can be further divided into layers with different functions. One example is the double-layer system in which conventional yttria-stabilized zirconia (YSZ) is used as bottom and new materials such as pyrochlores or perovskites are used as topcoat layers. These systems demonstrated an improved temperature capability compared to standard YSZ. In addition, new functions are introduced within the TBCs. These can be sensorial properties that can be used for an improved temperature control or even for monitoring remaining lifetime. Further increased application temperatures will also lead to efforts for a further improvement of the reflectivity of the coatings to reduce the radiative heat transfer through the TBC.