This paper proposes a simplicity-oriented approach and framework for language-to-language transformation of, in particular, graphical languages. Key to simplicity is the decomposition of the transformation specification into sub-rule systems that separately specify purpose-specific aspects. We illustrate this approach by employing a variation of Plotkin’s Structural Operational Semantics (SOS) for pattern-based transformations of typed graphs in order to address the aspect ‘computation’ in a graph rewriting fashion. Key to our approach are two generalizations of Plotkin’s structural rules: the use of graph patterns as the matching concept in the rules, and the introduction of node and edge types. Types do not only allow one to easily distinguish between different kinds of dependencies, like control, data, and priority, but may also be used to define a hierarchical layering structure. The resulting Type-based Structural Operational Semantics (TSOS) supports a well-structured and intuitive specification and realization of semantically involved language-to-language transformations adequate for the generation of purpose-specific views or input formats for certain tools, like, e.g., model checkers. A comparison with the general-purpose transformation frameworks ATL and Groove, illustrates along the educational setting of our graphical WebStory language that TSOS provides quite a flexible format for the definition of a family of purpose-specific transformation languages that are easy to use and come with clear guarantees.
A new interdisciplinary approach is discribed to identifying unknown parameters using an extended version of the known interval bisection method. This developed method is based on the use of finite elements for calibrating the simulation calculation. The resulting thermo-elastic deformations which occur in drilling processes with impaired cooling lubrication are to be used as correction values for tool positioning in the NC control. Based on the strong impact on workpiece temperature of machining, a simulation approach is presented for calculating the temperature fields and their thermo-elastic consequences. In addition, methods are presented to correct these effects. This paper particularly deals with the temperature fields of drilling operations. Special attention is paid to the technique employed for iterative numerical determination of the unknown heat flux ηw and heat transfer coefficient \(\bar {\gamma }\) values. Finally, the data obtained from experiments are compared with those achieved by numerical simulation in order to verify the efficiency of simulation and determination of parameters. 相似文献
Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated. 相似文献
In light of the growing relevance of customer-oriented business strategies IT investments in the field of Customer Relationship Management have increased considerably. However, firms often could not realize sufficient returns on these IT investments. One major reason for this failure seems to be the lack of appropriate approaches to determine the economic impact of such investments ex ante. Therefore, we develop an economic model to determine the optimal level of Customer Relationship Management IT investments. Using this approach, firms can evaluate, to what extent investments in Customer Relationship Management IT are reasonable. One major result is that in most cases the “all or nothing strategy” pursued by many firms does not lead to the optimal level of investments. To illustrate the practical utility and applicability of the approach, we provide a real world example of a German financial services provider. 相似文献
During software system evolution, software architects intuitively trade off the different architecture alternatives for their extra-functional properties, such as performance, maintainability, reliability, security, and usability. Researchers have proposed numerous model-driven prediction methods based on queuing networks or Petri nets, which claim to be more cost-effective and less error-prone than current practice. Practitioners are reluctant to apply these methods because of the unknown prediction accuracy and work effort. We have applied a novel model-driven prediction method called Q-ImPrESS on a large-scale process control system from ABB consisting of several million lines of code. This paper reports on the achieved performance prediction accuracy and reliability prediction sensitivity analyses as well as the effort in person hours for achieving these results. 相似文献
The most practical way to get spatially broad and continuous measurements of the surface temperature in the data-sparse cryosphere is by satellite remote sensing. The uncertainties in satellite-derived LSTs must be understood to develop internally-consistent decade-scale land surface temperature (LST) records needed for climate studies. In this work we assess satellite-derived “clear-sky” LST products from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), and LSTs derived from the Enhanced Thematic Mapper Plus (ETM+) over snow and ice on Greenland. When possible, we compare satellite-derived LSTs with in-situ air temperature observations from Greenland Climate Network (GC-Net) automatic weather stations (AWS). We find that MODIS, ASTER and ETM+ provide reliable and consistent LSTs under clear-sky conditions and relatively-flat terrain over snow and ice targets over a range of temperatures from ? 40 to 0 °C. The satellite-derived LSTs agree within a relative RMS uncertainty of ~ 0.5 °C. The good agreement among the LSTs derived from the various satellite instruments is especially notable since different spectral channels and different retrieval algorithms are used to calculate LST from the raw satellite data. The AWS record in-situ data at a “point” while the satellite instruments record data over an area varying in size from: 57 × 57 m (ETM+), 90 × 90 m (ASTER), or to 1 × 1 km (MODIS). Surface topography and other factors contribute to variability of LST within a pixel, thus the AWS measurements may not be representative of the LST of the pixel. Without more information on the local spatial patterns of LST, the AWS LST cannot be considered valid ground truth for the satellite measurements, with RMS uncertainty ~ 2 °C. Despite the relatively large AWS-derived uncertainty, we find LST data are characterized by high accuracy but have uncertain absolute precision. 相似文献
We show on a case study from an autonomous aerospace context how to apply a game-based model-checking approach as a powerful
technique for the verification, diagnosis, and adaptation of system behaviors based on temporal properties. This work is part
of our contribution within the SHADOWS project, where we provide a number of enabling technologies for model-driven self-healing.
We propose here to use GEAR, a game-based model checker, as a user-friendly tool that can offer automatic proofs of critical
properties of such systems. Although it is a model checker for the full modal μ-calculus, it also supports derived, more user-oriented logics. With GEAR, designers and engineers can interactively investigate
automatically generated winning strategies for the games, by this way exploring the connection between the property, the system,
and the proof.
This work has been partially supported by the European Union Specific Targeted Research Project SHADOWS (IST-2006-35157), exploring a Self-Healing Approach to Designing cOmplex softWare Systems. The project’s web page is at .
This article is an extended version of Renner et al. [18] presented at ISoLA 2007, Poitiers, December 2007. 相似文献
Superhydrophobic coatings are widely applicable, e.g., as self-cleaning surfaces or water–oil separation membranes, yet their wider usage is impeded due to costs of fabrication, size, or substrate limitation. Spray-coating is a versatile coating procedures and might offer a good solution for the fabrication of these superhydrophobic coatings, due to the fact that coatings can be fabricated on various materials in a simple, fast, and inexpensive manner. Most procedures rely on hybrid coatings of hydrophobized nanoparticles and a polymeric matrix, which have several drawbacks including the easy loss of nanoparticles and difficult waste handling. Here, the fabrication of the superhydrophobic material, called Fluoropor, for the first time, by spray-coating on various substrates including metals, tissues, concrete, and glass is presented. It is fabricated by spray-coating a mixture of a highly fluorinated monomer blended with porogens followed by photopolymerization. The superhydrophobicity of the material relies on the porous structure on the micro-/nanoscale across the bulk material and does not require any nanoparticles. Excellent self-cleaning ability of these coatings, resistance against thermal and abrasive impact, and their application as oil–water separation membranes are shown. This versatile applicability is highly promising for real-world application as self-cleaning coatings or oil–water separating membranes. 相似文献
Ultralow expansion (ULE) glasses are of special interest for temperature stabilized systems for example in precision metrology. Nowadays, ULE materials are mainly used in macroscopic and less in micromechanical systems. Reasons for this are a lack of technologies for parallel fabricating high-quality released microstructures with a high accuracy. As a result, there is a high demand in transferring these materials into miniaturized application examples, realistic system modeling, and the investigation of microscopic material properties. Herein, a technological base for fabricating released micromechanical structures and systems with a structure height above 100 μm in ULE 7972 glass is established. Herein, the main fabrication parameters that are important for the system design and contribute thus to the introduction of titanium silicate as material for glass-based micromechanical systems are discussed. To study the mechanical properties in combination with respective simulation models, microcantilevers are used as basic mechanical elements to evaluate technological parameters and other impact factors. The implemented models allow to predict the micromechanical system properties with a deviation of only ±5% and can thus effectively support the micromechanical system design in an early stage of development. 相似文献
By increasing the density of interfaces in NiAl–CrMo in situ composites, the mechanical properties can be significantly improved compared to conventionally cast material. The refined microstructure is achieved by manufacturing through electron beam powder bed fusion (PBF-EB). By varying the process parameters, an equiaxed or columnar cell morphology can be obtained, exhibiting a plate-like or an interconnected network of the (Cr,Mo) reinforcement phase which is embedded in a NiAl matrix. The microstructure of the different cell morphologies is investigated in detail using scanning electron microscope, transmission electron microscopy, and atom probe tomography. For both morphologies, the mechanical properties at elevated temperatures are analyzed by compression and creep experiments parallel and perpendicular to the building direction. In comparison to cast NiAl and NiAl–(Cr, Mo), the yield strength of the PBF-EB fabricated specimens is significantly improved at temperatures up to 1,027 °C. While the columnar morphology exhibits the best improved mechanical properties at high temperatures, the equiaxial morphology shows nearly ideal isotropic mechanical behavior, which is a substantial advantage over directionally solidified material. 相似文献