一种带接口的CMOS10位电流型乘法D／A转换器

介绍了一种带接口的单片ＣＭＯＳ１０位电流型乘法Ｄ／Ａ转换器的设计及工作方式。着重阐述逻辑电平转换、控制逻辑的结构设计及其工作方式。在不修调电阻网络的情况下，该Ｄ／Ａ转换器在５Ｖ、１５Ｖ下，其线性误差、微分误差、满刻度误差均能达到１０位精度     

Applications of Soliton Transmission Control in Optimal Design of Long－Haul Soliton Communication System

ＡｐｐｌｉｃａｔｉｏｎｓｏｆｃｈａｏｓｉｎｓｐｒｅａｄｓｐｅｃｔｒｕｍｃｏｍｍｕｎｉｃａｔｉｏｎｓＡｐｐｌｉｃａｔｉｏｎｓｏｆＳｏｌｉｔｏｎＴｒａｎｓｍｉｓｓｉｏｎＣｏｎｔｒｏｌｉｎＯｐｔｉｍａｌＤｅｓｉｇｎｏｆＬｏｎｇ－ＨａｕｌＳｏｌｉｔｏｎＣｏｍ...     

利用假单胞菌天冬氨酸－β－脱羧酶高效生产L－丙氨酸

通过诱变筛选得到一株具有高活性Ｌ－Ａｓｐ－β－脱羧酶的菌株ＰｓｅｕｄｏｍｏｎａｓＮＸ－１，对该株酶形成和酶反应的条件进行了详细研究，该株可以高效地转化Ｌ－Ａｓｐ生成Ｌ－ＡＩａ，转化４～５山每Ｌ培养液可转化Ｌ－Ａｓｐ量高达１４００ｇ左右，生成Ｌ－Ａｌａ浓度高达９０％以上，摩尔转化率近１００％。     

精确定位物方焦面位置的简便方法

提出一种利用细激光束和全息光栅精确定位光学系统物方焦平面位置的方法，可用于光学傅里叶交换、光学信息处理系统的调整。其优点是所用光学元件少，操作简便。     

SIR-C data quality and calibration results

The SIR-C/X-SAR imaging radar took its first flight on the Space Shuttle Endeavour in April 1994 and flew for a second time in October 1994. This multifrequency radar has fully polarimetric capability at L- and C-band, and a single polarization at X-band (X-SAR). The Endeavour missions were designated the Space Radar Laboratory-1 (SRL-1) and -2 (SRL-2). Calibration of polarimetric L- and C-band data for all the different modes SIR-C offers is an especially complicated problem. The solution involves extensive analysis of pre-flight test data to come up with a model of the system, analysis of in-flight test data to determine the antenna pattern and gains of the system during operation, and analysis of data from over fourteen calibration sites distributed around the SIR-C/X-SAR orbit track. The SRL missions were the first time a multifrequency polarimetric imaging radar employing a phased array antenna has been flown in space. Calibration of SIR-C data products involved some unique technical problems given the complexity of the radar system. In this paper, the approach adopted for calibration of SIR-C data is described and the calibration performance of the data products is presented     

新型耐磨蚀铸造高铬钢的研制

本文设计了用于含有磨粒的强酸介质的新型耐磨蚀钢的化学成分，采用金相显微镜、Ｘ射线衍射、扫描电子显微镜、腐蚀与磨蚀试验等方法，观察与分析了钢的显微组织与磨蚀形貌，研究了新型铸造高铬钢的性能，并对其磨蚀机理进行了较为深入的探讨。试验结果表明，较高的含铬量和含碳量与适量的钼、铜的复合使用，使新型高铬钢具有比高合金化的ＺＳ２８合金更好的抗磨蚀性能，而且成本比较低，具有广阔的应用前景。     

Operation of strained-layer (In,Ga)As quantum well lasers preparedon (112)B GaAs substrate

The operation of (In,Ga)As quantum well lasers prepared on [112]-oriented GaAs substrates is reported. Threshold current densities as low as 187 A/cm² for a 1.57 mm-long device have been obtained under pulsed-mode operation. The demonstration of laser action in a heterostructure grown on the [112]-oriented substrate is important for the design of blue-green light emitters by second harmonic generation     

LiMn2O4纳米粉的湿化学合成与表征

采用湿化学方法，通过水溶液中的化学反应直接合成纳米级LiMn2O4化合物，其结构基本上为无定型，但XRD图谱中已出现LiMn2O4特征峰，说明在水溶液中已初步形成尖晶石结构，运用XRD，SEM，TG－DTA等现代检测手段对样品的性能进行进行了表征，XRD及SEM等分析结果表明，合成样品经简单热处理后，晶型结构完善，形貌规整，均匀，比表面积积显著减小，粒度明显变粗。TG－DTA热分析证明，样品在低于900℃的温度下进行热处理时，仅发生LiMn2O4的晶化过程，产物的化学组成稳定，该法合成锂离子电池正极材料LiMn2O4，具有工艺流程简单，产物的成分，结构及粒度均匀等特点。     

从供应商受益角度研究国际供应链合作关系

首先指出从供应商受益角度对国际供应链合作关系进行研究的重要意义，接着对国际供应链合作关系的起源及其概念界定进行了综合分析；其次对国际供应链战略伙伴关系下的供应商受益进行了相关研究结论的综合，并对我国供应商参与国际供应链合作的实际受益进行分析，然后将两者进行了比较，最后综合全文探讨得出本文研究的结论。     

微波高压提取快速测定饲料含氟量的探讨

采用微波高压制样技术,快速提取饲料中的氟元素,结合氟离子选择性电极标准添加和电位极差测试方法,能够快速、准确地测试饲料中的含氟量