A 6 GHz 68 mW BiCMOS phase-locked loop

The design of a 6 GHz fully monolithic phase-locked loop fabricated in a 1 μm, 20 GHz BiCMOS technology is described. The circuit incorporates a voltage-controlled oscillator that senses and combines the transitions in a ring oscillator to achieve a period equal to two ECL gate delays. A mixer topology is also used that exhibits full symmetry with respect to its inputs and operates with supply voltages as low as 1.5 V. Dissipating 60 mW from a 2 V supply, the circuit has a tracking range of 300 MHz, an rms jitter of 3.1 ps, and phase noise of -75 dBc/Hz at 1 kHz offset     

Effects of changes in strain path on the anisotropy of yield stresses of low-carbon steel and 70-30 brass sheets

Uniaxial tensile tests in various directions following uniaxial extension, equibiaxial stretching or plane strain rolling have been performed to study the effects of changes in strain path on the anisotropy of yield stresses of aluminium-killed low-carbon steel and 70-30 brass sheets. The anisotropy could be predicted from the specimen textures, if dislocation structure were equiaxed, as in the case of equibiaxial stretching. However, elongated dislocation cell structures, developed in the steel specimens prestrained in uniaxial tension or plane strain rolling, gave rise to the second-stage yield stresses higher than predicted from textures in the directions different from the maximum prestrain direction. Planar dislocation structures in the brass specimens prestrained in uniaxial tension or plane strain rolling gave the second-stage yield stresses lower than predicted from the textures in the directions different from the maximum prestrain direction. The phenomena are discussed based on textures and dislocation structures.     

Function of yeast Rad52 protein as a mediator between replication protein A and the Rad51 recombinase

The RAD51 and RAD52 genes of Saccharomyces cerevisiae are key members of the RAD52 epistasis group required for genetic recombination and the repair of DNA double-stranded breaks. The RAD51 encoded product mediates the DNA strand exchange reaction. Efficient strand exchange is contingent upon the addition of the heterotrimeric single-stranded DNA binding factor replication protein A (RPA) after Rad51 has nucleated onto the single-stranded DNA. However, if the single-stranded DNA is incubated with Rad51 and RPA simultaneously to mimic what may be expected to occur in vivo, the efficiency of strand exchange decreases dramatically, revealing an inhibitory effect of RPA that is distinct from its stimulatory function. Interestingly, the inclusion of Rad52 protein, which has been purified in this study from yeast cells, restores the efficiency of strand exchange. Thus, Rad52 functions as a co-factor for the Rad51 recombinase, acting specifically to overcome the apparent competition by RPA for binding to single-stranded DNA.     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

菱镁制品低温早强促凝剂作用机理分析

菱镁胶凝材料在20℃以上的生产环境具有快硬的特点,但在环境温度低于15℃时,1d的硬化强度只有28d的10%,低于5℃时存在无法脱模的问题。为使菱镁制品能在较低温度下正常生产,试验研制出一种菱镁制品低温早强促凝剂。介绍该早强促凝剂的作用机理、技术性能、掺量特点及在低温生产环境下促进菱镁制品强度发展的作用。     

电力系统动态过程的柔性自校正仿真方法

电力系统动态过程仿真的效率和数值稳定性常常受到刚性的困扰。通过对非线性动态系统刚性特征的分析和再思考指出：刚性时空分布的局部性为柔性化提供了基础。其次，文中提出了自适应柔性分组策略和具有自校正积分措施的变量组协调策略。通过对变量组别划分、相对步长因子调整、最小积分步长调整3种自适应策略的统一处理,可以动态地控制变量组别的变化和积分步长的调整，在保证精度的前提下放开了较慢变量的步长，避免了传统方法所有变量采用相同步长进行积分导致计算效率低下的缺陷，克服了现有变量分组方法难以做到同时自适应调整多个控制参量的不足，使计算效率得到了显著提高。     

A linear minimum mean square error multiuser receiver inRayleigh-fading channels

We generalize the multiuser (CDMA spread spectrum) communication systems to the fading environments. We first extend Verdu's (1986) conventional optimum receiver to Rayleigh-fading environments and then evaluate its performance. Having no knowledge of the received power at the receiving end, we therefore need an estimator to efficiently estimate the received signal strength of each user in fading environments. A linear minimum mean square error (LMMSE) unbiased estimator is proposed to attain this goal. By using the minimum mean square error (MMSE) Bayesian estimation, we further propose the LMMSE bit estimator for efficient demodulation. Its performance is close to the optimum multiuser receiver but with a much simpler polynomial complexity. To further reduce the complexity, we extend the LMMSE estimator to the sequential LMMSE estimator. In sequential estimation, we do not need to implement the matched filter banks and to perform the matrix inversion when estimating. In addition, it converges after approximately 2k iterations, where k is the number of users. With this fast convergence property and the simple structure, the sequential LMMSE estimator provides an attractive alternative to the implementation of a multiuser system     

Phase transformation of calcia-alumina-magnesia fibres produced by inviscid melt spinning

CaO-Al₂O₃-MgO (CAM) ceramic fibre produced via inviscid melt spinning (IMS) was investigated for phase transformation. Differential thermal analysis (DTA) on the as-spun CAM fibre gave two transformation peaks, one for exothermic peak at around 927°C and the other for endothermic one at around 1100°C. In order to identify each phase transformation x-ray diffraction (XRD) analysis was performed on the CAM fibres heat-treated to each phase transformation completion temperature. The exothermic peak was determined to represent crystallization of remaining amorphous phase in the as-spun CAM fibre. The endothermic peak was determined to correspond to transformation of non-equilibrium CaO · Al₂O₃ phase to equilibrium 3CaO· 5Al₂O₃ phase.     

Cryptanalysis of an involutional block cipher using cellular automata

In 2006, an involutional block cipher using cellular automata was proposed. A self-invertible CA-based structure allows for an efficient hardware implementation. This paper analyzes the insecurity of the cipher due to its conjugate property. The results of this study will make it possible to construct a decryption process without knowledge of the secret key.